|
如题。
Decompressing..........done
Here we try to capture the default reset button: None.
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Mar 22 12:00:15 CST 2004 (denny@dnylinux)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.50.21.6
CPU type 0x29007: 200MHz
Total memory: 0x800000 bytes (8MB)
Total memory used by CFE: 0x8072EB60 - 0x807B4460 (547072)
Initialized Data: 0x8072EB60 - 0x807310D0 (9584)
BSS Area: 0x807310D0 - 0x80732460 (5008)
Local Heap: 0x80732460 - 0x807B2460 (524288)
Stack Area: 0x807B2460 - 0x807B4460 (8192)
Text (code) segment: 0x80700000 - 0x80709FF0 (40944)
Boot area (physical): 0x006ED000 - 0x0072D000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-11-50-9E-6B-E7, ipaddr 192.168.2.1, mask 255.255.255.0
gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: ..... 1482752 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029007
Primary instruction cache 8kb, linesize 16 bytes (2 ways)
Primary data cache 4kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (lchen@penguin.askey.com) (gcc version 3.0 20010422 (prerelease) with bcm4710a0 modifications) #1 Fri Apr 2 16:05:18 PST 2004
Determined physical RAM map:
memory: 00800000 @ 00000000 (usable)
On node 0 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM4712 rev 1 at 200 MHz
Calibrating delay loop... 199.47 BogoMIPS
Memory: 6424k/8192k available (1257k kernel code, 1768k reserved, 108k data, 64k init, 0k highmem)
Dentry cache hash table entries: 1024 (order: 1, 8192 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
PPP generic driver version 2.4.2
Amd/Fujitsu Extended Query Table v1.0 at 0x0040
number of CFI chips: 1
Flash device: 0x200000 at 0x1c000000
Physically mapped flash: cramfs filesystem found at block 743
Creating 5 MTD partitions on "hysically mapped flash":
0x00000000-0x00020000 : "pmon"
0x00020000-0x001f0000 : "linux"
0x000b9ce4-0x001f0000 : "rootfs"
0x00004000-0x00006000 : "profile"
0x001f0000-0x00200000 : "nvram"
sflash: found no supported devices
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
ip_conntrack version 2.1 (64 buckets, 512 max) - 344 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k freed
Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
Using /lib/modules/2.4.20/kernel/drivers/net/wl/wl.o
Using /lib/modules/2.4.20/kernel/drivers/net/led/led.o
Hit enter to continue...Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 0 to IF -:eth0:-
Added VLAN with VID == 1 to IF -:eth0:-
WARNING: VLAN 1 does not work with many switches,
consider another number if you have problems.
killall: iappd: no process killed
iappd: No such file or directory
info, Moreton Bay DHCP Server (v0.9.5) started
===wan_ifname=ppp0, ifname=vlan1
No interface specified. Quitting...
killall: upnp: no process killed
fill pppoe
Hit enter to continue...No interface specified. Quitting...
Hit enter to continue...ipcp_init():usepeerdns(0),wo->dnsaddr[0](0),wo->dnsaddr[1](0)
setdevname_pppoe(): pppoe_srv_name=(null), Service_name=
setdevname_pppoe(): pppoe_srv_name=(null), Service_name=
ip_check_options():usepeerdns(1),wo->dnsaddr[0](0),wo->dnsaddr[1](0)
ip_check_options(): ouraddr(0), dns1(0), dns2(0)
pppoecd(main.c): Ready to start Discovery phase....
pppoecd(main.c): discovery phase begin...
send_disc():WAN : PADI sent
log_pppoe(): 2 secs
row_size(): Can't open /tmp/log_web
log_pppoe(): Loged message(WAN : PADI sent) into /tmp/log_web directly
send_disc():WAN : PADI sent
log_pppoe(): 5 secs
row_size(): rows = 1
log_pppoe(): Loged message(WAN : PADI sent) into /tmp/log_web directly
因为没有连接网络,只是看看TTL所以最下面显示PPPOE连接失败。这根线用在WHR3上没有问题。呵呵。。不知道什么原因。
7230上串口的定交与8230一样。那个白色的四针插座是接口1。IN。 2。OUT。 3。GND 4。3.3V(实测3.32V) |
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?立即注册
×
|