为什么我编译出来的固件大小为0

sourc***

原本写的脚本是可以编译生成的，就是在编译生成micro的时候烧进去ping 192.168.1.1 ttl=100，如何修改，结果是生产的固件大小为0了，各位大虾这样是怎么回事？
mv -f /home/dd-wrt/DD-WRT/src/router/mipsel-uclibc/target/lib/modules/2.4.35/kernel/drivers/net/switch/* /home/dd-wrt/DD-WRT/src/router/mipsel-uclibc/target/lib/modules/2.4.35
mv: cannot stat `/home/dd-wrt/DD-WRT/src/router/mipsel-uclibc/target/lib/modules/2.4.35/kernel/drivers/net/switch/*': No such file or directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/home/dd-wrt/DD-WRT/src/router'
make: *** [install] Error 2
./sstrip/sstrip: ../src/router/mipsel-uclibc/target/usr/sbin/dbclient: No such file or directory
./sstrip/sstrip: ../src/router/mipsel-uclibc/target/usr/sbin/dropbear: No such file or directory
.......
.......
LZMA 4.06 Copyright (c) 1999-2004 Igor Pavlov  2004-09-05
../src/router/mipsel-uclibc/vmlinuz: No such file or directory
.......

在线等！

mye***

群号码: 83387894

有人在折腾这东西

wfh***

make[1]: *** [install] Error 1
make[1]: Leaving directory `/home/dd-wrt/DD-WRT/src/router'
make: *** [install] Error 2
好明显的出错啊，怎么可能还可以编译得出来

sourc***

我也看到这个错误了，关键是怎么解决呢？

sourc***

rm -f /home/dd-wrt/DD-WRT/src/router/mipsel-uclibc/target/lib/modules/2.4.35/build
if test -d "/home/dd-wrt/DD-WRT/src/router/mipsel-uclibc/target/lib/modules/2.4.35/kernel/drivers/net/diag"; then mv /home/dd-wrt/DD-WRT/src/router/mipsel-uclibc/target/lib/modules/2.4.35/kernel/drivers/net/diag/* /home/dd-wrt/DD-WRT/src/router/mipsel-uclibc/target/lib/modules/2.4.35; fi
mv -f /home/dd-wrt/DD-WRT/src/router/mipsel-uclibc/target/lib/modules/2.4.35/kernel/drivers/net/switch/* /home/dd-wrt/DD-WRT/src/router/mipsel-uclibc/target/lib/modules/2.4.35
mv: cannot stat `/home/dd-wrt/DD-WRT/src/router/mipsel-uclibc/target/lib/modules/2.4.35/kernel/drivers/net/switch/*': No such file or directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/home/dd-wrt/DD-WRT/src/router'
make: *** [install] Error 2
换了很多脚本，还是这的错误！