（求助）AX3600刷三方web升级，强刷都不能使用，命令强刷连接中断

zzy201892

之前刷三方固件，web升级都挺正常。最近出了5.15内核，想尝尝鲜，刷完发现许多插件不兼容，想web升级退回5.10版本，上传固件无保留刷完重启发现内核版本没变，还是5.15，不知道问题出在哪？ #####qsdk强刷openwrt教程###### 1：打开WINSCP软件，选择SCP协议登录Openwrt，找到tmp文件夹 2：将固件QSDK固件openwrt-ipq807x-generic-redmi_ax6-squashfs-nand-sysupgrade.bin拖进tmp里 3：打开WINSCP软件里面的终端，输入sysupgrade -F -n /tmp/openwrt-ipq807x-generic-xiaomi_ax3600-squashfs-nand-sysupgrade.bin 4：执行等重启即可 用上面这个方法强刷，输入命令，就返回连接中断，路由自动重启，内核还是5.15不变 不知道怎么解决，请大神指教，非常感谢。 内核日志： [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [    0.000000] Linux version 5.15.26 (runner@fv-az173-848) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19129-7b8772cb71) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Tue Mar 8 17:24:33 2022 [    0.000000] Machine model: Xiaomi AX3600 [    0.000000] Zone ranges: [    0.000000]   DMA      [mem 0x0000000040000000-0x000000005fffffff] [    0.000000]   DMA32    empty [    0.000000]   Normal   empty [    0.000000] Movable zone start for each node [    0.000000] Early memory node ranges [    0.000000]   node   0: [mem 0x0000000040000000-0x0000000040ffffff] [    0.000000]   node   0: [mem 0x0000000041000000-0x000000004a3fffff] [    0.000000]   node   0: [mem 0x000000004a400000-0x000000004a4fffff] [    0.000000]   node   0: [mem 0x000000004a500000-0x000000004a5fffff] [    0.000000]   node   0: [mem 0x000000004a600000-0x000000004e8fffff] [    0.000000]   node   0: [mem 0x000000004e900000-0x000000005fffffff] [    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff] [    0.000000] psci: probing for conduit method from DT. [    0.000000] psci: PSCIv1.0 detected in firmware. [    0.000000] psci: Using standard PSCI v0.2 function IDs [    0.000000] psci: MIGRATE_INFO_TYPE not supported. [    0.000000] psci: SMC Calling Convention v1.0 [    0.000000] psci: OSI mode supported. [    0.000000] percpu: Embedded 17 pages/cpu s30104 r8192 d31336 u69632 [    0.000000] pcpu-alloc: s30104 r8192 d31336 u69632 alloc=17*4096 [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [    0.000000] Detected VIPT I-cache on CPU0 [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129024 [    0.000000] Kernel command line: ubi.mtd=rootfs_1 root=mtd:ubi_rootfs rootfstype=squashfs rootwait uart_en=1 root=/dev/ubiblock0_1 [    0.000000] Unknown kernel command line parameters "uart_en=1", will be passed to user space. [    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [    0.000000] mem auto-init: stackff, heap allocff, heap freeff [    0.000000] Memory: 416376K/524288K available (7168K kernel code, 838K rwdata, 1928K rodata, 1216K init, 269K bss, 107912K reserved, 0K cma-reserved) [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [    0.000000] rcu: Hierarchical RCU implementation. [    0.000000]         Tracing variant of Tasks RCU enabled. [    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [    0.000000] Root IRQ handler: gic_handle_irq [    0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479] [    0.000000] random: get_random_bytes called from start_kernel+0x4a8/0x6dc with crng_init=0 [    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [    0.000135] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [    0.000151] pid_max: default: 32768 minimum: 301 [    0.000261] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [    0.000278] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [    0.001695] rcu: Hierarchical SRCU implementation. [    0.001845] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [    0.002250] smp: Bringing up secondary CPUs ... [    0.002813] Detected VIPT I-cache on CPU1 [    0.002880] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [    0.003458] Detected VIPT I-cache on CPU2 [    0.003499] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [    0.004044] Detected VIPT I-cache on CPU3 [    0.004082] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [    0.004141] smp: Brought up 1 node, 4 CPUs [    0.004167] SMP: Total of 4 processors activated. [    0.004176] CPU features: detected: 32-bit EL0 Support [    0.004183] CPU features: detected: CRC32 instructions [    0.004236] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [    0.004246] CPU: All CPU(s) started at EL1 [    0.004269] alternatives: patching kernel code [    0.010631] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [    0.010664] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [    0.010811] pinctrl core: initialized pinctrl subsystem [    0.011627] NET: Registered PF_NETLINK/PF_ROUTE protocol family [    0.012091] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [    0.012134] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [    0.012171] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [    0.012511] thermal_sys: Registered thermal governor 'step_wise' [    0.013821] cpuidle: using governor menu [    0.014031] ASID allocator initialised with 65536 entries [    0.073722] SCSI subsystem initialized [    0.073902] usbcore: registered new interface driver usbfs [    0.073943] usbcore: registered new interface driver hub [    0.073980] usbcore: registered new device driver usb [    0.074215] qcom_scm: convention: smc arm 64 [    0.075409] clocksource: Switched to clocksource arch_sys_counter [    0.076142] NET: Registered PF_INET protocol family [    0.076245] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [    0.076801] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [    0.076828] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [    0.076880] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [    0.076960] TCP: Hash tables configured (established 4096 bind 4096) [    0.077043] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [    0.077072] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [    0.077205] NET: Registered PF_UNIX/PF_LOCAL protocol family [    0.077236] PCI: CLS 0 bytes, default 64 [    0.078381] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [    0.082196] squashfs: version 4.0 (2009/01/31) Phillip Lougher [    0.082212] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [    0.085015] qcom-qmp-phy 84000.phy: Registered Qcom-QMP phy [    0.086438] qcom-pcie 20000000.pci: host bridge /soc/pci@20000000 ranges: [    0.086498] qcom-pcie 20000000.pci:       IO 0x0020200000..0x002020ffff -> 0x0020200000 [    0.086527] qcom-pcie 20000000.pci:      MEM 0x0020220000..0x002fffffff -> 0x0020220000 [    0.216957] qcom-pcie 20000000.pci: iATU unroll: enabled [    0.216975] qcom-pcie 20000000.pci: Detected iATU regions: 8 outbound, 8 inbound [    0.317043] qcom-pcie 20000000.pci: Link up [    0.317197] qcom-pcie 20000000.pci: PCI host bridge to bus 0000:00 [    0.317215] pci_bus 0000:00: root bus resource [bus 00-ff] [    0.317232] pci_bus 0000:00: root bus resource [io  0x0000-0xffff] (bus address [0x20200000-0x2020ffff]) [    0.317247] pci_bus 0000:00: root bus resource [mem 0x20220000-0x2fffffff] [    0.317295] pci 0000:00:00.0: [17cb:1002] type 01 class 0x060400 [    0.317322] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff] [    0.317405] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [    0.319972] pci 0000:01:00.0: [168c:0050] type 00 class 0x028000 [    0.320115] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [    0.320333] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [    0.320792] pci 0000:01:00.0: supports D1 [    0.320803] pci 0000:01:00.0: PME# supported from D0 D1 D3hot [    0.323223] pci 0000:00:00.0: BAR 8: assigned [mem 0x20300000-0x205fffff] [    0.323243] pci 0000:00:00.0: BAR 9: assigned [mem 0x20600000-0x207fffff 64bit pref] [    0.323258] pci 0000:00:00.0: BAR 0: assigned [mem 0x20220000-0x20220fff] [    0.323273] pci 0000:00:00.0: BAR 7: assigned [io  0x1000-0x1fff] [    0.323289] pci 0000:01:00.0: BAR 0: assigned [mem 0x20400000-0x205fffff 64bit] [    0.323361] pci 0000:01:00.0: BAR 6: assigned [mem 0x20300000-0x2030ffff pref] [    0.323375] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [    0.323387] pci 0000:00:00.0:   bridge window [io  0x1000-0x1fff] [    0.323400] pci 0000:00:00.0:   bridge window [mem 0x20300000-0x205fffff] [    0.323413] pci 0000:00:00.0:   bridge window [mem 0x20600000-0x207fffff 64bit pref] [    0.325289] pcieport 0000:00:00.0: PME: Signaling with IRQ 81 [    0.325595] pcieport 0000:00:00.0: AER: enabled with IRQ 81 [    0.328431] bam-dma-engine 704000.dma: num-channels unspecified in dt [    0.328454] bam-dma-engine 704000.dma: num-ees unspecified in dt [    0.332093] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [    0.332665] msm_serial 78b3000.serial: msm_serial: detected port #0 [    0.332710] msm_serial 78b3000.serial: uartclk = 3686400 [    0.332756] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 22, base_baud = 230400) is a MSM [    0.332788] msm_serial: console setup on port #0 [    1.134034] printk: console [ttyMSM0] enabled [    1.139008] msm_serial: driver initialized [    1.147260] loop: module loaded [    1.148583] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xaa [    1.150001] nand: ESMT GD9FS2G8F2A [    1.156607] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [    1.160546] spmi spmi-0: PMIC arbiter version v2 (0x20010000) [    1.168097] pmd9655_s3: supplied by regulator-dummy [    1.173592] pmd9655_s4: supplied by regulator-dummy [    1.178362] pmd9655_ldo11: supplied by regulator-dummy [    1.196139] i2c_dev: i2c /dev entries driver [    1.199417] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 800000 KHz, changing to: 1017600 KHz [    1.200262] sdhci: Secure Digital Host Controller Interface driver [    1.210018] sdhci: Copyright(c) Pierre Ossman [    1.216155] sdhci-pltfm: SDHCI platform and OF driver helper [    1.222748] NET: Registered PF_INET6 protocol family [    1.226887] Segment Routing with IPv6 [    1.231266] In-situ OAM (IOAM) with IPv6 [    1.234849] NET: Registered PF_PACKET protocol family [    1.238851] 8021q: 802.1Q VLAN Support v1.8 [    1.255975] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xaa [    1.256014] nand: ESMT GD9FS2G8F2A [    1.261391] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 [    1.264827] 17 qcomsmem partitions found on MTD device qcom_nand.0 [    1.272297] Creating 17 MTD partitions on "qcom_nand.0": [    1.278423] 0x000000000000-0x000000100000 : "0:sbl1" [    1.284795] mtdblock: MTD device '0:sbl1' is NAND, please consider using UBI block devices instead. [    1.289123] 0x000000100000-0x000000200000 : "0:mibib" [    1.298474] mtdblock: MTD device '0:mibib' is NAND, please consider using UBI block devices instead. [    1.302942] 0x000000200000-0x000000500000 : "0:qsee" [    1.314153] mtdblock: MTD device '0:qsee' is NAND, please consider using UBI block devices instead. [    1.317074] 0x000000500000-0x000000580000 : "0:devcfg" [    1.326259] mtdblock: MTD device '0:devcfg' is NAND, please consider using UBI block devices instead. [    1.331039] 0x000000580000-0x000000600000 : "0:rpm" [    1.340735] mtdblock: MTD device '0:rpm' is NAND, please consider using UBI block devices instead. [    1.345000] 0x000000600000-0x000000680000 : "0:cdt" [    1.354440] mtdblock: MTD device '0:cdt' is NAND, please consider using UBI block devices instead. [    1.358818] 0x000000680000-0x000000700000 : "0:appsblenv" [    1.368248] mtdblock: MTD device '0:appsblenv' is NAND, please consider using UBI block devices instead. [    1.373301] 0x000000700000-0x000000800000 : "0:appsbl" [    1.383595] mtdblock: MTD device '0:appsbl' is NAND, please consider using UBI block devices instead. [    1.387814] 0x000000800000-0x000000880000 : "0:art" [    1.397503] mtdblock: MTD device '0:art' is NAND, please consider using UBI block devices instead. [    1.401771] 0x000000880000-0x000000900000 : "bdata" [    1.411216] mtdblock: MTD device 'bdata' is NAND, please consider using UBI block devices instead. [    1.415601] 0x000000900000-0x000000980000 : "crash" [    1.425013] mtdblock: MTD device 'crash' is NAND, please consider using UBI block devices instead. [    1.429393] 0x000000980000-0x000000a00000 : "crash_syslog" [    1.438811] mtdblock: MTD device 'crash_syslog' is NAND, please consider using UBI block devices instead. [    1.443871] 0x000000a00000-0x000002dc0000 : "rootfs" [    1.456912] random: fast init done [    1.478774] mtdblock: MTD device 'rootfs' is NAND, please consider using UBI block devices instead. [    1.478897] mtd: device 12 (rootfs) set to be root filesystem [    1.486864] mtdsplit: no squashfs found in "rootfs" [    1.492528] 0x000002dc0000-0x00000adc0000 : "rootfs_1" [    1.586450] mtdblock: MTD device 'rootfs_1' is NAND, please consider using UBI block devices instead. [    1.586618] 0x00000adc0000-0x00000cc80000 : "overlay" [    1.616088] mtdblock: MTD device 'overlay' is NAND, please consider using UBI block devices instead. [    1.616259] 0x00000cc80000-0x00000cd00000 : "rsvd0" [    1.624867] mtdblock: MTD device 'rsvd0' is NAND, please consider using UBI block devices instead. [    1.629037] 0x00000cd00000-0x00000d600000 : "0:wififw" [    1.644373] mtdblock: MTD device '0:wififw' is NAND, please consider using UBI block devices instead. [    1.649680] remoteproc remoteproc0: cd00000.q6v5_wcss is available [    1.653093] ubi0: attaching mtd13 [    2.112958] random: crng init done [    2.220963] ubi0: scanning is finished [    2.227221] ubi0: attached mtd13 (name "rootfs_1", size 128 MiB) [    2.227265] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [    2.232303] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [    2.239001] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 [    2.245858] ubi0: good PEBs: 1024, bad PEBs: 0, corrupted PEBs: 0 [    2.252613] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 [    2.258870] ubi0: max/mean erase counter: 47/29, WL threshold: 4096, image sequence number: 1823805053 [    2.265995] ubi0: available PEBs: 0, total reserved PEBs: 1024, PEBs reserved for bad PEB handling: 40 [    2.275284] ubi0: background thread "ubi_bgt0d" started, PID 383 [    2.285103] block ubiblock0_1: created from ubi0:1(rootfs) [    2.294431] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. [    2.295016] Freeing unused kernel memory: 1216K [    2.375588] Run /sbin/init as init process [    2.375608]   with arguments: [    2.375610]     /sbin/init [    2.375613]   with environment: [    2.375615]     HOME=/ [    2.375617]     TERM=linux [    2.375620]     uart_en=1 [    2.564282] init: Console is alive [    2.564417] init: - watchdog - [    3.055213] kmodloader: loading kernel modules from /etc/modules-boot.d/* [    3.070252] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [    3.070768] init: - preinit - [    6.542060] UBIFS (ubi0:2): Mounting in unauthenticated mode [    6.542189] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 481 [    6.600348] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data" [    6.600386] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [    6.607186] UBIFS (ubi0:2): FS size: 108945408 bytes (103 MiB, 858 LEBs), max 869 LEBs, journal size 5459968 bytes (5 MiB, 43 LEBs) [    6.617074] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB) [    6.628694] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 05A6CB09-2AFA-41D2-B989-F0B90B4D1A25, small LPT model [    6.640712] mount_root: switching to ubifs overlay [    6.651681] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off. [    6.656079] urandom-seed: Seeding with /etc/urandom.seed [    6.745971] procd: - early - [    6.746075] procd: - watchdog - [    7.303096] procd: - watchdog - [    7.304439] procd: - ubus - [    7.358725] procd: - init - [    7.611030] urngd: v1.0.2 started. [    7.650563] kmodloader: loading kernel modules from /etc/modules.d/* [    7.699582] zram: Added device: zram0 [    7.823265] ssdk_switch_device_num_init[1160]:INFO:ess-switch dts node number: 1 [    7.823368] ssdk_dt_get_switch_node[971]:INFO:ess-switch DT exist! [    7.829782] ssdk_dt_parse_access_mode[857]:INFO:switch_access_mode: local bus [    7.835742] ssdk_dt_parse_access_mode[870]:INFO:switchreg_base_addr: 0x3a000000 [    7.842935] ssdk_dt_parse_access_mode[871]:INFO:switchreg_size: 0x1000000 [    7.850058] ssdk_dt_parse_mac_mode[295]:INFO:mac mode = 0x0 [    7.857001] ssdk_dt_parse_mac_mode[304]:INFO:mac mode1 = 0xff [    7.862377] ssdk_dt_parse_mac_mode[313]:INFO:mac mode2 = 0xff [    7.868331] ssdk_dt_parse_uniphy[332]:INFO:ess-uniphy DT exist! [    7.874160] ssdk_dt_parse_intf_mac[800]:INFO:dp2 MAC 8c:de:f9:81:ec:f3 [    7.879781] ssdk_dt_parse_intf_mac[800]:INFO:dp3 MAC 8c:de:f9:b5:c6:d9 [    7.886378] ssdk_dt_parse_intf_mac[800]:INFO:dp4 MAC 8c:de:f9:b5:c6:d9 [    7.892879] ssdk_dt_parse_intf_mac[800]:INFO:dp5 MAC 8c:de:f9:b5:c6:d9 [    7.899412] ssdk_plat_init start [    8.027304] ssdk_gcc_clock_init[1033]:INFO:SSDK gcc clock init successfully! [    8.028325] HPPE initializing... [    8.033736] malibu_phy_api_ops_init[2860]:INFO:qca probe malibu phy driver succeeded! [    8.043408] regi_init[3567]:INFO:Initializing HPPE!! [    8.285413] ssdk_ppe_reset_init[1265]:INFO:ppe reset successfully! [    8.288658] qca_hppe_tdm_hw_init[684]:INFO:tdm setup num=96 [    8.290811] qca_hppe_portctrl_hw_init[110]:INFO:Hawkeye PPE port initializing [    8.521563] ssdk_switch_register[1718]:INFO:Chip version 0x1500 [    8.521596] qca_link_polling_select[1315]:INFO:link-polling-required node does not exist [    8.526295] ssdk_switch_register[1744]:INFO:polling is selected [    8.534616] regi_init[3571]:INFO:Initializing HPPE Done!! [    8.540334] regi_init[3631]:INFO:qca-ssdk module init succeeded! [    8.561666] EDMA ver 1 hw init [    8.561925] EDMA HW Reset completed succesfully [    8.563648] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7) [    8.568082] RxDesc:1 (15-15) RxFill:1 (7-7) [    8.578304] ********************************************************** [    8.578346] * NSS Data Plane driver [    8.584013] ********************************************************** [    8.589023] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [    8.614005] Loading modules backported from Linux version v5.15.8-0-g43e577d7a2cb [    8.614055] Backport generated by backports.git v5.15.8-1-0-g83f664bb [    8.640829] NET: Registered PF_QIPCRTR protocol family [    8.646305] xt_time: kernel timezone is -0000 [    8.680439] PPP generic driver version 2.4.2 [    8.681518] NET: Registered PF_PPPOX protocol family [    8.693954] ath10k 5.15 driver, optimized for CT firmware, probing pci device: 0x50. [    8.694464] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002) [    8.701209] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [    9.616397] ath10k_pci 0000:01:00.0: qca9887 hw1.0 target 0x4100016d chip_id 0x004000ff sub 0000:0000 [    9.616450] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0 [    9.624731] ath10k_pci 0000:01:00.0: firmware ver 10.1-ct-87-__fW-022-ecad3248 api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 61a92df5 [    9.676792] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 b4ce36fa [   10.542886] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256 [   10.550275] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410' [   10.550325] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0' [   10.555654] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 25560 iram: 24780' [   10.606692] ath10k_pci 0000:01:00.0: htt-ver 2.1 wmi-op 2 htt-op 2 cal file max-sta 128 raw 0 hwcrypto 1 [   10.607052] ath10k_pci 0000:01:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000 [   10.746524] ath: EEPROM regdomain sanitized [   10.746530] ath: EEPROM regdomain: 0x64 [   10.746535] ath: EEPROM indicates we should expect a direct regpair map [   10.746544] ath: Country alpha2 being used: 00 [   10.746547] ath: Regpair used: 0x64 [   10.756291] ath11k c000000.wifi: ipq8074 hw2.0 [   10.756616] remoteproc remoteproc0: powering up cd00000.q6v5_wcss [   10.760177] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668 [   11.909722] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up [   11.911063] ath11k c000000.wifi: qmi ignore invalid mem req type 3 [   11.916809] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0x292 soc_id 0xffffffff [   11.922194] ath11k c000000.wifi: fw_version 0x250a04a5 fw_build_timestamp 2021-12-20 07:09 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 [   11.922669] kmodloader: done loading kernel modules from /etc/modules.d/* [   12.468654] zram0: detected capacity change from 0 to 415744 [   12.477423] Adding 207868k swap on /dev/zram0.  Priority:100 extents:1 across:207868k SSDsc [   14.736013] nss-dp 3a001400.dp3 eth1: nss_dp_edma: Registering netdev eth1(qcom-id:3) with EDMA [   14.736442] nss-dp 3a001400.dp3 eth1: PHY Link up speed: 1000 [   14.744270] br-lan: port 1(eth1) entered blocking state [   14.749495] br-lan: port 1(eth1) entered disabled state [   14.754736] device eth1 entered promiscuous mode [   14.765796] nss-dp 3a001600.dp4 eth2: nss_dp_edma: Registering netdev eth2(qcom-id:4) with EDMA [   14.766471] br-lan: port 2(eth2) entered blocking state [   14.773340] br-lan: port 2(eth2) entered disabled state [   14.778892] device eth2 entered promiscuous mode [   14.786635] nss-dp 3a001800.dp5 eth3: nss_dp_edma: Registering netdev eth3(qcom-id:5) with EDMA [   14.789450] br-lan: port 3(eth3) entered blocking state [   14.797166] br-lan: port 3(eth3) entered disabled state [   14.802699] device eth3 entered promiscuous mode [   14.813125] nss-dp 3a001200.dp2 eth0: nss_dp_edma: Registering netdev eth0(qcom-id:2) with EDMA [   14.813444] nss-dp 3a001200.dp2 eth0: PHY Link up speed: 1000 [   15.119115] pppoe-wan: renamed from ppp0 [   15.186971] ath: EEPROM regdomain: 0x8024 [   15.186994] ath: EEPROM indicates we should expect a country code [   15.186998] ath: doing EEPROM country->regdmn map search [   15.187002] ath: country maps to regdmn code: 0x3b [   15.187007] ath: Country alpha2 being used: AU [   15.187012] ath: Regpair used: 0x3b [   15.187016] ath: regdomain 0x8024 dynamically updated by user [   16.377270] ath10k_pci 0000:01:00.0: 10.1 wmi init: vdevs: 16  peers: 127  tid: 256 [   16.384656] ath10k_pci 0000:01:00.0: wmi print 'P 128 V 8 T 410' [   16.384917] ath10k_pci 0000:01:00.0: wmi print 'msdu-desc: 1424  sw-crypt: 0 ct-sta: 0' [   16.390044] ath10k_pci 0000:01:00.0: wmi print 'alloc rem: 25560 iram: 24780' [   16.441113] ath10k_pci 0000:01:00.0: pdev param 0 not supported by firmware [   16.446603] ath10k_pci 0000:01:00.0: rts threshold -1 [   16.448011] br-lan: port 1(eth1) entered blocking state [   16.452090] br-lan: port 1(eth1) entered forwarding state [   16.457950] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [   16.464127] br-lan: port 4(wlan0) entered blocking state [   16.469153] br-lan: port 4(wlan0) entered disabled state [   16.474720] device wlan0 entered promiscuous mode [   16.513866] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [   16.514073] br-lan: port 4(wlan0) entered blocking state [   16.519320] br-lan: port 4(wlan0) entered forwarding state [   16.674128] br-lan: port 5(wlan1) entered blocking state [   16.674178] br-lan: port 5(wlan1) entered disabled state [   16.679040] device wlan1 entered promiscuous mode [   16.683930] br-lan: port 5(wlan1) entered blocking state [   16.688434] br-lan: port 5(wlan1) entered forwarding state [   17.403666] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [   32.467910] pmd9655_ldo11: disabling [   51.078284] nss-dp 3a001400.dp3 eth1: PHY Link is down [   51.078414] br-lan: port 1(eth1) entered disabled state