找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
楼主: ink

关于我们销售的TTL线的使用方法

[复制链接]
发表于 2010-10-5 17:16 | 显示全部楼层
这个真实用,尤其是对新人
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2010-10-11 12:53 | 显示全部楼层
我收藏一下
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2010-10-11 17:28 | 显示全部楼层
好贴,顶了!!!!!!!!!!!!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2010-10-12 14:14 | 显示全部楼层
问下,论坛上买的那LINKSYS WRT54G2 V1 无线路由器裸板怎么接这线?主要是不知道接那个位置
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2010-10-14 05:07 | 显示全部楼层
努力学习,天天向上
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2010-10-15 15:52 | 显示全部楼层
mark!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2010-10-15 20:39 | 显示全部楼层
1# ink


留个脚印~~~~
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2010-11-4 08:43 | 显示全部楼层
不错。。。。。支持,mark
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2010-11-4 12:46 | 显示全部楼层
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Feb 26 21:11:19 CST 2004 (root@honor)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 2004.1.30.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29007: 200MHz
Total memory: 0x4000000 bytes (64MB)

Total memory used by CFE:  0x80300000 - 0x8043E6F0 (1304304)
Initialized Data:          0x80339120 - 0x8033AF20 (7680)
BSS Area:                  0x8033AF20 - 0x8033C6F0 (6096)
Local Heap:                0x8033C6F0 - 0x8043C6F0 (1048576)
Stack Area:                0x8043C6F0 - 0x8043E6F0 (8192)
Text (code) segment:       0x80300000 - 0x80339120 (233760)
Boot area (physical):      0x0043F000 - 0x0047F000
Relocation Factor:         I:00000000 - D:00000000

Boot version: v3.1
The boot is CFE

mac_init(): Find mac [00:0F:66:5A:2E:02] in location 0
Nothing...
Device eth0:  hwaddr 00-0F-66-5A-2E-02, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
==> push button

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Feb 26 21:11:19 CST 2004 (root@honor)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 2004.1.30.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29007: 200MHz
Total memory: 0x4000000 bytes (64MB)

Total memory used by CFE:  0x80300000 - 0x8043E6F0 (1304304)
Initialized Data:          0x80339120 - 0x8033AF20 (7680)
BSS Area:                  0x8033AF20 - 0x8033C6F0 (6096)
Local Heap:                0x8033C6F0 - 0x8043C6F0 (1048576)
Stack Area:                0x8043C6F0 - 0x8043E6F0 (8192)
Text (code) segment:       0x80300000 - 0x80339120 (233760)
Boot area (physical):      0x0043F000 - 0x0047F000
Relocation Factor:         I:00000000 - D:00000000

Boot version:  ==> v3.1
The boot is CFE

mac_init(): Find mac [00:0F:66:5A:2E:02] in location 0
Update lan mac from [00:90:4C:60:00:2A] to [00:0F:66:5A:2E:02]
Committing NVRAM...don?

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu Feb 26 21:11:19 CST 2004 (root@honor)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 2004.1.30.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29007: 200MHz
Total memory: 0x4000000 bytes (64MB)

Total memory used by CFE:  0x80300000 - 0x8043E6F0 (1304304)
Initialized Data:          0x80339120 - 0x8033AF20 (7680)
BSS Area:                  0x8033AF20 - 0x8033C6F0 (6096)
Local Heap:                0x8033C6F0 - 0x8043C6F0 (1048576)
Stack Area:                0x8043C6F0 - 0x8043E6F0 (8192)
Text (code) segment:       0x80300000 - 0x80339120 (233760)
Boot area (physical):      0x0043F000 - 0x0047F000
Relocation Factor:         I:00000000 - D:00000000

Boot version: v3.1
The boot is CFE

mac_init(): Find mac [00:0F:66:5A:2E:02] in location 0
Nothing...
Device eth0:  hwaddr 00-0F-66-5A-2E-02, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 5100 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #5 Tue Nov 2 01:48:23 CST 2010
CPU revision is: 00029007
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 16256
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 4kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (19 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (30 instructions).
PID hash table entries: 256 (order: 8, 1024 bytes)
CPU: BCM4712 rev 1 pkg 0 at 200 MHz
Using 100.000 MHz high precision timer.
console [ttyS0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61860k/65536k available (2301k kernel code, 3612k reserved, 456k data, 112k init, 0k highmem)
SLUB: Genslabs=6, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
老大,固件挂了,SecureCRT 5.1下不能输入怎么刷啊
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2010-11-4 12:49 | 显示全部楼层
The boot is CFE

mac_init(): Find mac [00:0F:66:5A:2E:02] in location 0
Nothing...
Device eth0:  hwaddr 00-0F-66-5A-2E-02, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Reading :: Failed.: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Optionsnull)
Loading: .. 5100 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22.19 (root@tomato) (gcc version 4.2.4) #5 Tue Nov 2 01:48:23 CST 2010
CPU revision is: 00029007
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Built 1 zonelists.  Total pages: 16256
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 4kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (19 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (30 instructions).
PID hash table entries: 256 (order: 8, 1024 bytes)
CPU: BCM4712 rev 1 pkg 0 at 200 MHz
Using 100.000 MHz high precision timer.
console [ttyS0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61860k/65536k available (2301k kernel code, 3612k reserved, 456k data, 112k init, 0k highmem)
SLUB: Genslabs=6, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.17
PPTP driver version 0.8.5-rc1
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Physically mapped flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x800000 at 0x1c000000
Creating 5 MTD partitions on "hysically mapped flash":
0x00000000-0x00040000 : "pmon"
0x00040000-0x007f0000 : "linux"
0x00123400-0x00780000 : "rootfs"
0x00780000-0x007f0000 : "jffs2"
0x007f0000-0x00800000 : "nvram"
Found a 0MB  serial flash
sflash: found no supported devices
u32 classifier
    OLD policer on
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (512 buckets, 4096 max)
GRE over IPv4 demultiplexor driver
ip_tables: (C) 2000-2006 Netfilter Core Team
net/ipv4/netfilter/tomato_ct.c [Oct 30 2010 01:55:40]
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 112k freed
Warning: unable to open an initial console.
et: module license 'unspecified' taints kernel.
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 5.10.56.46
eth1: Broadcom BCM4320 802.11 Wireless Controller 5.10.56.46
Algorithmics/MIPS FPU Emulator v1.5
NVRAM No change was necessary.
eth2: No such device
eth3: No such device
lo: File exists
iptables: Bad rule (does a matching rule exist in that chain?)
iptables: Bad rule (does a matching rule exist in that chain?)
read: No such file or directory
read: No such file or directory
read: No such file or directory

read: No such file or directory
read: No such file or directory
read: No such file or directory
read: No such process
read: No such process

eth2: No such device
eth3: No such device
iptables: Bad rule (does a matching rule exist in that chain?)
iptables: Bad rule (does a matching rule exist in that chain?)
iptables: Bad rule (does a matching rule exist in that chain?)
System halted.
System halted
最后这里不能输入,怎么刷固件啊
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2011-3-21 13:08 | 显示全部楼层
这个要的
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2011-3-21 19:43 | 显示全部楼层
老老实实来学习
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2011-8-10 21:24 | 显示全部楼层
好帖,值得收藏
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2011-8-17 16:33 | 显示全部楼层
好贴,mark。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2011-9-27 18:54 | 显示全部楼层
好贴,谢谢了
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-3-29 07:32

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表