|
Please choose the operation:
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
9: Load Boot Loader code then write to Flash via TFTP.
You choosed 2
0
2: System Load Linux Kernel then write to Flash via TFTP.
Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
Please Input new ones /or Ctrl-C to discard
Input device IP (10.10.10.123) ==:10.10.10.123
Input server IP (10.10.10.3) ==:10.10.10.3
Input Linux Kernel filename () ==:firmware.tftp
netboot_common, argc= 3
NetTxPacket = 0x80FE4280
KSEG1ADDR(NetTxPacket) = 0xA0FE4280
NetLoop,call eth_halt !
NetLoop,call eth_init !
Trying Eth0 (10/100-M)
Waitting for RX_DMA_BUSY status Start... done
Header Payload scatter function is Disable !!
ETH_STATE_ACTIVE!!
Using Eth0 (10/100-M) device
TFTP from server 10.10.10.3; our IP address is 10.10.10.123
Filename 'firmware.tftp'.
TIMEOUT_COUNT=10,Load address: 0x80100000
Loading: *
ArpTimeoutCheck
T T T T T T T T
Abort
raspi_erase_write: offs:50000, count:0
Done!
## Booting image at bf050000 ...
raspi_read: from:50000 len:40
Bad Magic Number,FFFFFFFF |
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?立即注册
×
|