用TTL连上WHR-HP-G54后无法进行任何操作

sig

超级终端中就一直重复着以下内容：

1. CFE version 1.0.37-1.08 for BCM947XX (32bit,SP,LE)
   
2. Build Date: 2006钳  7奉 11泣 残退泣 15:41:55 JST (root@ifedora)
   
3. Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
   
4. 
   
5. Initializing Arena
   
6. Initializing Devices.
   
7. * cmdset: AMD Standard
   
8. * Insaner_1 = (0x7e)
   
9. * flashutl_cmd: type (0004), read_id (0090)
   
10. -> vendid (00DA), devid (227E), devid2 (0000)
    
11. * flashutl_cmd: type (0003), read_id (0090)
    
12. -> vendid (00DA), devid (227E), devid2 (0000)
    
13. * flashutl_cmd: type (0002), read_id (0090)
    
14. -> vendid (0019), devid (1000), devid2 (0000)
    
15. * Flash Info. -> manufacturer (FF), device (FF)
    
16. * Flash Info. -> manufacturer2 (0000), device2 (0000)
    
17. * Insaner_2 = (0x7e)
    
18. * cmdset: AMD Standard
    
19. * Insaner_1 = (0x7e)
    
20. * flashutl_cmd: type (0004), read_id (0090)
    
21. -> vendid (00DA), devid (227E), devid2 (0000)
    
22. * flashutl_cmd: type (0003), read_id (0090)
    
23. -> vendid (00DA), devid (227E), devid2 (0000)
    
24. * flashutl_cmd: type (0002), read_id (0090)
    
25. -> vendid (0019), devid (1000), devid2 (0000)
    
26. * Flash Info. -> manufacturer (FF), device (FF)
    
27. * Flash Info. -> manufacturer2 (0000), device2 (0000)
    
28. * Insaner_2 = (0x7e)
    
29. * cmdset: AMD Standard
    
30. * Insaner_1 = (0x7e)
    
31. * flashutl_cmd: type (0004), read_id (0090)
    
32. -> vendid (00DA), devid (227E), devid2 (0000)
    
33. * flashutl_cmd: type (0003), read_id (0090)
    
34. -> vendid (00DA), devid (227E), devid2 (0000)
    
35. * flashutl_cmd: type (0002), read_id (0090)
    
36. -> vendid (0019), devid (1000), devid2 (0000)
    
37. * Flash Info. -> manufacturer (FF), device (FF)
    
38. * Flash Info. -> manufacturer2 (0000), device2 (0000)
    
39. * Insaner_2 = (0x7e)
    
40. * memc_config: [00048000]
    
41. pmon_nvram_get:[sdram_init]=[0]
    
42. pmon_nvram_get:[sdram_config]=[0x22]
    
43. pmon_nvram_get:[sdram_refresh]=[0]
    
44. pmon_nvram_get:[sdram_ncdl]=[0]
    
45. #### pmon_sdram_init is [0]
    
46. #### pmon_sdram_config is [0x22]
    
47. #### pmon_sdram_refresh is [0]
    
48. #### pmon_sdram_ncdl is [0]
    
49. #### NVRAM warning sdram parameter is unset!!
    
50. #### sdram_init is [NULL]
    
51. #### sdram_config is [NULL]
    
52. #### sdram_refresh is [NULL]
    
53. #### sdram_ncdl is [NULL]
    
54. #### sdram parameter: reset (CFE default)
    
55. CPU type 0x29008: 200MHz
    
56. Total memory: 16384 KBytes
    
57. 
    
58. Total memory used by CFE:  0x80400000 - 0x804A39B0 (670128)
    
59. Initialized Data:          0x80439670 - 0x8043C210 (11168)
    
60. BSS Area:                  0x8043C210 - 0x8043D9B0 (6048)
    
61. Local Heap:                0x8043D9B0 - 0x804A19B0 (409600)
    
62. Stack Area:                0x804A19B0 - 0x804A39B0 (8192)
    
63. Text (code) segment:       0x80400000 - 0x80439670 (235120)
    
64. Boot area (physical):      0x004A4000 - 0x004E4000
    
65. Relocation Factor:         I:00000000 - D:00000000
    
66. 
    
67. Erasing NVRAM...done
    
68. >0x80FFFFFF>complite

复制代码

一直不断的重复，请问谁知道如何让其中断让我输入命令？？

郁闷死……又找不到原生LPT口，JTAG暂时不能用……

morfell

你试试中断快一点  一插电源立刻按键盘

jacky_ye

超级终端或者CRT里的流控制不要选任何一项，然后按照2楼说的试试看？

gggggg

为什么会一直重复  
Erasing  NVRAM    DONE

jacky_ye

确实奇怪。。。

sig

3楼2楼的都照做，还是老样子

至于为什么一直都擦除NVRAM，我也搞不清楚……

gggggg

直接JTAG写ERASE WHOLEFLASH 然后写CFE吧.

test181818

别折腾了，你刷进去的是自己修改过MAC或者别的内容的CFE吧，是的话现象就是不停的重启的，因为这个机器的CFE是带校验的，不能随便改的。建议你老老实实的刷原来机器里面备份的或者在论坛里面下载一个刷进去。