[2019-03-05]改华硕[N14U N54U]5G 2G的7620老毛子Padavan固件(私人云储存 aria2 QOS)

ddo***

我赞同你的说法

love***

BUG反馈：
机型 Newifi D2 （新三）
酸酸设置 chnrouter ，再使用“重启”按钮重启机器，则酸酸显示为 chnrouter 但实为回国模式，反而国内的都被代理了，需要被代理的国外反而没有被代理。再次手动重启ss，正常。
问题来源：暂时不知道是手中矿老板的新三成渣了还是 5G WDS 问题，隔几天路由 wifi 手机等终端无法获取 IP，手动重启发现的。酸酸设置成 gwflist 没有此问题。

szko***

Megoc 发表于 2018-11-7 21:02
最近的固件升级后开启adm功能后手机qq聊天图片会显示盗链图片。

用KP试试 KP问题少点

熟悉***

各位大神，这个固件能正常使用华硕的DDNS功能吗？

ci***

哦耶（OYE-0001）该刷哪个固件？

涼***

我重置opt下载的是lnmp，这是我个人问题吗？
版本8-11-5

ana***

newifi mini 的固件最近半年以来kms服务全部无法使用

霸槽***

newifi3软重启硬盘不会自动挂载，要重新插拔一次或者断电重启才行

qq***

H大，BUG反馈：newifi3软重启硬盘不会自动挂载，要重新插拔一次或者断电重启才行

yaoca***

华硕（ASUS）RT-AC1200GU 能刷这个固件吗？

2631***

MYSQL 无限重启呀 求修复

Nov 10 17:00:44 【LNMP】: nginx启动成功
Nov 10 17:00:44 【LNMP】: mysqld启动成功
Nov 10 17:00:45 【默认主页】: 默认服务网站允许远程访问, 允许 81 端口通过防火墙
Nov 10 17:00:45 【MySQL】: 允许远程访问, 允许 3306 端口通过防火墙
Nov 10 17:00:46 【LNMP】: 守护进程启动
Nov 10 17:01:08 【LNMP】: 重新启动mysqld
Nov 10 17:01:10 [mysqld]: stop
Nov 10 17:01:10 [php7-fpm]: stop
Nov 10 17:01:11 [nginx]: stop
Nov 10 17:01:11 [redis]: stop
Nov 10 17:01:13 【LNMP】: /opt 已用数据空间30%/100%
Nov 10 17:01:13 【LNMP】: /opt 已用节点空间5%/100%
Nov 10 17:01:13 【LNMP】: 以上两个数据如出现占用100%时，则 opt 数据空间 或 Inodes节点 爆满，会影响 LNMP 运行，请重新正确格式化 U盘。
Nov 10 17:01:16 【LNMP】: 运行 nginx+php+mysql 环境
Nov 10 17:01:17 [mysqld]: stop
Nov 10 17:01:17 [php7-fpm]: stop
Nov 10 17:01:17 [nginx]: stop
Nov 10 17:01:17 [redis]: stop
Nov 10 17:01:17 [nginx]: start
Nov 10 17:01:17 [php7-fpm]: start
Nov 10 17:01:17 [mysqld]: start
Nov 10 17:01:17 [redis]: start
Nov 10 17:01:17 [redis]: stop
Nov 10 17:01:17 【LNMP】: /opt 已用数据空间30%/100%
Nov 10 17:01:18 【LNMP】: /opt 已用节点空间5%/100%
Nov 10 17:01:18 【LNMP】: 以上两个数据如出现占用100%时，则 opt 数据空间 或 Inodes节点 爆满，会影响 LNMP 运行，请重新正确格式化 U盘。
Nov 10 17:01:18 admin: Started php-fpm from .
Nov 10 17:01:23 【LNMP】: nginx启动成功
Nov 10 17:01:23 【LNMP】: mysqld启动成功
Nov 10 17:01:23 【默认主页】: 默认服务网站允许远程访问, 允许 81 端口通过防火墙
Nov 10 17:01:23 【MySQL】: 允许远程访问, 允许 3306 端口通过防火墙
Nov 10 17:01:24 【LNMP】: 守护进程启动
Nov 10 17:01:28 【LNMP】: 重新启动mysqld
Nov 10 17:01:30 [mysqld]: stop
Nov 10 17:01:30 [php7-fpm]: stop
Nov 10 17:01:31 [nginx]: stop
Nov 10 17:01:31 [redis]: stop
Nov 10 17:01:32 【LNMP】: /opt 已用数据空间30%/100%
Nov 10 17:01:32 【LNMP】: /opt 已用节点空间5%/100%
Nov 10 17:01:32 【LNMP】: 以上两个数据如出现占用100%时，则 opt 数据空间 或 Inodes节点 爆满，会影响 LNMP 运行，请重新正确格式化 U盘。
Nov 10 17:01:34 【LNMP】: 运行 nginx+php+mysql 环境
Nov 10 17:01:36 [mysqld]: stop
Nov 10 17:01:36 [php7-fpm]: stop
Nov 10 17:01:36 [nginx]: stop
Nov 10 17:01:36 [redis]: stop
Nov 10 17:01:36 [redis]: start
Nov 10 17:01:36 [mysqld]: start
Nov 10 17:01:36 [nginx]: start
Nov 10 17:01:36 [php7-fpm]: start
Nov 10 17:01:36 【LNMP】: /opt 已用数据空间30%/100%
Nov 10 17:01:36 【LNMP】: /opt 已用节点空间5%/100%
Nov 10 17:01:36 【LNMP】: 以上两个数据如出现占用100%时，则 opt 数据空间 或 Inodes节点 爆满，会影响 LNMP 运行，请重新正确格式化 U盘。
Nov 10 17:01:36 [redis]: stop

nco7***

V2Ray ：
Nov 10 18:48:37 【v2瑞】: 启动失败,10 秒后自动尝试重新启动
Nov 10 18:48:48 dnsmasq[12654]: exiting on receipt of SIGTERM
Nov 10 18:48:48 dnsmasq[12866]: started, version 2.80 cachesize 1536
Nov 10 18:48:48 dnsmasq[12866]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Nov 10 18:48:48 dnsmasq[12866]: warning: ignoring resolv-file flag because no-resolv is set
Nov 10 18:48:48 dnsmasq-dhcp[12866]: DHCP, IP range 192.168.2.100 -- 192.168.2.150, lease time 1d
Nov 10 18:48:48 dnsmasq-dhcp[12866]: DHCPv6 stateless on br0
Nov 10 18:48:48 dnsmasq-dhcp[12866]: DHCPv4-derived IPv6 names on br0
Nov 10 18:48:48 dnsmasq-dhcp[12866]: router advertisement on br0
Nov 10 18:48:48 dnsmasq-dhcp[12866]: IPv6 router advertisement enabled
Nov 10 18:48:48 dnsmasq-dhcp[12866]: DHCP, sockets bound exclusively to interface br0
Nov 10 18:48:48 dnsmasq[12866]: read /etc/hosts - 5 addresses
Nov 10 18:48:48 dnsmasq[12866]: read /etc/storage/dnsmasq/hosts - 0 addresses
Nov 10 18:48:48 dnsmasq-dhcp[12866]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Nov 10 18:48:51 【v2瑞】: 找到 /opt/bin/v2瑞
Nov 10 18:48:51 【v2瑞】: 运行 v2瑞_script
Nov 10 18:48:51 crond[13950]: crond (busybox 1.29.3) started, log level 8
Nov 10 18:48:54 【v2瑞】:  V2Ray 4.0 (Po) 20181101
Nov 10 18:48:54 【v2瑞】:  A unified platform for anti-censorship.
Nov 10 18:48:56 【v2瑞】:  main: failed to read config file: /etc/storage/v2瑞_config_script.sh > v2瑞.com/core/main/json: failed to execute v2ctl to convert config file. > v2瑞.com/core/common/platform/ctlcmd: failed to execute v2ctl: v2瑞.com/ext/tools/conf/command: failed to parse json config > v2瑞.com/ext/tools/conf/serial: failed to read config file > json: cannot unmarshal array into Go struct field Config.inbound of type conf.InboundDetourConfig
Nov 10 18:48:56 【v2瑞】:  
Nov 10 18:48:56 【v2瑞】:   > exit status 255
Nov 10 18:48:56 dnsmasq[12866]: exiting on receipt of SIGTERM
Nov 10 18:48:56 dnsmasq[13993]: started, version 2.80 cachesize 1536
Nov 10 18:48:56 dnsmasq[13993]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Nov 10 18:48:56 dnsmasq[13993]: warning: ignoring resolv-file flag because no-resolv is set
Nov 10 18:48:56 dnsmasq-dhcp[13993]: DHCP, IP range 192.168.2.100 -- 192.168.2.150, lease time 1d
Nov 10 18:48:56 dnsmasq-dhcp[13993]: DHCPv6 stateless on br0
Nov 10 18:48:56 dnsmasq-dhcp[13993]: DHCPv4-derived IPv6 names on br0
Nov 10 18:48:56 dnsmasq-dhcp[13993]: router advertisement on br0
Nov 10 18:48:56 dnsmasq-dhcp[13993]: IPv6 router advertisement enabled
Nov 10 18:48:56 dnsmasq-dhcp[13993]: DHCP, sockets bound exclusively to interface br0
Nov 10 18:48:56 dnsmasq[13993]: read /etc/hosts - 5 addresses
Nov 10 18:48:56 dnsmasq[13993]: read /etc/storage/dnsmasq/hosts - 0 addresses
Nov 10 18:48:56 dnsmasq-dhcp[13993]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Nov 10 18:48:56 【v2瑞】: 启动失败,10 秒后自动尝试重新启动
Nov 10 18:49:07 dnsmasq[13993]: exiting on receipt of SIGTERM
Nov 10 18:49:07 dnsmasq[14104]: started, version 2.80 cachesize 1536
Nov 10 18:49:07 dnsmasq[14104]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Nov 10 18:49:07 dnsmasq[14104]: warning: ignoring resolv-file flag because no-resolv is set
Nov 10 18:49:07 dnsmasq-dhcp[14104]: DHCP, IP range 192.168.2.100 -- 192.168.2.150, lease time 1d
Nov 10 18:49:07 dnsmasq-dhcp[14104]: DHCPv6 stateless on br0
Nov 10 18:49:07 dnsmasq-dhcp[14104]: DHCPv4-derived IPv6 names on br0
Nov 10 18:49:07 dnsmasq-dhcp[14104]: router advertisement on br0
Nov 10 18:49:07 dnsmasq-dhcp[14104]: IPv6 router advertisement enabled
Nov 10 18:49:07 dnsmasq-dhcp[14104]: DHCP, sockets bound exclusively to interface br0
Nov 10 18:49:07 dnsmasq[14104]: read /etc/hosts - 5 addresses
Nov 10 18:49:07 dnsmasq[14104]: read /etc/storage/dnsmasq/hosts - 0 addresses
Nov 10 18:49:07 dnsmasq-dhcp[14104]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Nov 10 18:49:09 【v2瑞】: 找到 /opt/bin/v2瑞
Nov 10 18:49:09 【v2瑞】: 运行 v2瑞_script
Nov 10 18:49:12 【v2瑞】:  V2Ray 4.0 (Po) 20181101
Nov 10 18:49:12 【v2瑞】:  A unified platform for anti-censorship.
Nov 10 18:49:14 【v2瑞】:  main: failed to read config file: /etc/storage/v2瑞_config_script.sh > v2瑞.com/core/main/json: failed to execute v2ctl to convert config file. > v2瑞.com/core/common/platform/ctlcmd: failed to execute v2ctl: v2瑞.com/ext/tools/conf/command: failed to parse json config > v2瑞.com/ext/tools/conf/serial: failed to read config file > json: cannot unmarshal array into Go struct field Config.inbound of type conf.InboundDetourConfig
Nov 10 18:49:14 【v2瑞】:  
Nov 10 18:49:14 【v2瑞】:   > exit status 255
Nov 10 18:49:14 dnsmasq[14104]: exiting on receipt of SIGTERM
Nov 10 18:49:15 dnsmasq[14247]: started, version 2.80 cachesize 1536
Nov 10 18:49:15 dnsmasq[14247]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Nov 10 18:49:15 dnsmasq[14247]: warning: ignoring resolv-file flag because no-resolv is set
Nov 10 18:49:15 dnsmasq-dhcp[14247]: DHCP, IP range 192.168.2.100 -- 192.168.2.150, lease time 1d
Nov 10 18:49:15 dnsmasq-dhcp[14247]: DHCPv6 stateless on br0
Nov 10 18:49:15 dnsmasq-dhcp[14247]: DHCPv4-derived IPv6 names on br0
Nov 10 18:49:15 dnsmasq-dhcp[14247]: router advertisement on br0
Nov 10 18:49:15 dnsmasq-dhcp[14247]: IPv6 router advertisement enabled
Nov 10 18:49:15 dnsmasq-dhcp[14247]: DHCP, sockets bound exclusively to interface br0
Nov 10 18:49:15 dnsmasq[14247]: read /etc/hosts - 5 addresses
Nov 10 18:49:15 dnsmasq[14247]: read /etc/storage/dnsmasq/hosts - 0 addresses
Nov 10 18:49:15 dnsmasq-dhcp[14247]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Nov 10 18:49:15 【v2瑞】: 启动失败,10 秒后自动尝试重新启动
Nov 10 18:49:25 【v2瑞】: 多次尝试启动失败，等待【19分钟】后自动尝试重新启动


还有v2瑞 怎么填服务器啊

qiuco***

3.4.3.9-099_8-10-07 以更新最新版 辛苦啦

Me***

szkorman 发表于 2018-11-8 12:37
用KP试试 KP问题少点

以前用的KP，但是KP现在好多都去不掉了，而且它与一些视频客户端好像会冲突，比如打开爱奇艺电脑客户端KP会占用大量cpu资源最终导致cpu拥堵而断网。

ljc***

我今天更新了下script 文件，现在很多东西都用不了了，求解决下，谢谢