TP-LINK WDR5600 有办法刷Uboot吗？

ly***

用TTL线进去了，没有办法中断UBOOT启动 ，每次重启后要从新接上TTL线。要不就会显示乱码的。这是TTL启动过程显示的信息。有高手能解决吗？

Boot 1.1.4 (Oct 30 2015 - 15:16:04)(COMPRESSED)

ap151 - Dragonfly 1.0

DRAM:  64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 212k for U-Boot at: 83fc8000
Reserving 132k for malloc() at: 83fa7000
Reserving 44 Bytes for Board Info at: 83fa6fd4
Reserving 36 Bytes for Global Data at: 83fa6fb0
Reserving 128k for boot params() at: 83f86fb0
Stack Pointer at: 83f86f98
Now running in RAM - U-Boot at: 83fc8000
Flash Manuf Id 0xc8, DeviceId0 0x40, DeviceId1 0x17
flash size 8MB, sector count = 2048
Flash:  8 MB
Using default environment

Autobooting in 1 seconds
verifying uboot partition...
ok
verifying kernel and romfs partition...
ok
Now starting to boot from uboot2!


Boot 1.1.4 (Oct 30 2015 - 15:23:35)

ap151 - Dragonfly 1.0

DRAM:  64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 137k for U-Boot at: 83fdc000
Reserving 132k for malloc() at: 83fbb000
Reserving 44 Bytes for Board Info at: 83fbafd4
Reserving 36 Bytes for Global Data at: 83fbafb0
Reserving 128k for boot params() at: 83f9afb0
Stack Pointer at: 83f9af98
Now running in RAM - U-Boot at: 83fdc000
Flash Manuf Id 0xc8, DeviceId0 0x40, DeviceId1 0x17
flash size 8MB, sector count = 2048
Flash:  8 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ath_gmac_enet_initialize...
No valid address in Flash. Using fixed address
Fetching MAC Address from 0x83ff115c
ath_gmac_enet_initialize: reset mask:c02200
Dragonfly----> S27 PHY *
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
athrs27_phy_setup ATHR_PHY_CONTROL 4 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :10
eth0 up
ATHRS27: resetting s27
ATHRS27: s27 reset done
: cfg1 0x800c0000 cfg2 0x7214
eth1: 00:0c:f0:60:dc:98
athrs27_phy_setup ATHR_PHY_CONTROL 0 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0 :10
athrs27_phy_setup ATHR_PHY_CONTROL 1 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :10
athrs27_phy_setup ATHR_PHY_CONTROL 2 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :10
athrs27_phy_setup ATHR_PHY_CONTROL 3 :1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3 :10
eth1 up
eth0, eth1
Setting 0x181162c0 to 0x4b962100
Autobooting in 1 seconds
## Booting image at 9f040000 ...
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 67108864

Starting kernel ...

[    0.000000] Linux version 3.3.8 (tplink@tplink-0B) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Fri Oct 30 15:26:08 CST 2015
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019750 (MIPS 74Kc)
[    0.000000] SoC: Qualcomm Atheros QCA956X rev 0
[    0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=AP151 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 61388k/65536k available (2203k kernel code, 4148k reserved, 567k data, 180k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:83
[    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 512
[    0.060000] Initialized recycle list for cpu 0.
[    0.070000] NET: Registered protocol family 16
[    0.070000] gpiochip_add: registered GPIOs 0 to 22 on device: ath79
[    0.080000] MIPS: machine is Qualcomm Atheros AP151 reference board
[    0.080000] registering PCI controller with io_map_base unset
[    0.090000] bio: create slab <bio-0> at 0
[    0.100000] PCI host bridge to bus 0000:00
[    0.100000] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[    0.110000] pci_bus 0000:00: root bus resource [io  0x0001]
[    0.110000] pci 0000:00:00.0: invalid calibration data
[    0.120000] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    0.120000] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref]
[    0.130000] pci 0000:00:00.0: using irq 40 for pin 1
[    0.130000] Switching to clocksource MIPS
[    0.140000] NET: Registered protocol family 2
[    0.140000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.140000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.150000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.150000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.160000] TCP reno registered
[    0.160000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.170000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.170000] NET: Registered protocol family 1
[    0.190000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.190000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.200000] msgmni has been set to 119
[    0.210000] io scheduler noop registered
[    0.210000] io scheduler deadline registered (default)
[    0.220000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
+erial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.250000] console [ttyS0] enabled, bootconsole disabled
[    0.250000] console [ttyS0] enabled, bootconsole disabled
[    0.260000] m25p80 spi0.0: found gd25q64CSIG, expected m25p80
[    0.270000] m25p80 spi0.0: gd25q64CSIG (8192 Kbytes)
[    0.270000] Searching for RedBoot partition table
[    0.280000] 9 RedBoot partitions found on MTD device spi0.0
[    0.280000] Creating 9 MTD partitions on "spi0.0":
[    0.290000] 0x000000000000-0x00000001d800 : "factory_boot"
[    0.290000] mtd: partition "factory_boot" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.310000] 0x00000001d800-0x00000001e000 : "factory_info"
[    0.320000] 0x00000001e000-0x000000020000 : "art"
[    0.320000] 0x000000020000-0x000000030000 : "config"
[    0.330000] 0x000000030000-0x000000040000 : "boot"
[    0.330000] 0x000000040000-0x00000013f484 : "kernel"
[    0.340000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.350000] 0x00000013f484-0x000000680000 : "rootfs"
[    0.360000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.370000] mtd: partition "rootfs" set to be root filesystem
[    0.380000] 0x000000680000-0x000000800000 : "rootfs_data"
[    0.380000] 0x000000040000-0x000000800000 : "firmware"
[    0.390000] Registered character driver slp_flash_chrdev
[    0.400000] u32 classifier
[    0.400000]     Performance counters on
[    0.400000]     input device check on
[    0.410000]     Actions configured
[    0.410000] nf_conntrack version 0.5.0 (959 buckets, 3836 max)
[    0.420000] TCP cubic registered
[    0.420000] NET: Registered protocol family 17
[    0.430000] 8021q: 802.1Q VLAN Support v1.8
[    0.430000] Flash UID signiture check OK.
[    0.440000] ### of_selftest(): No testcase data in device tree; not running tests
[    0.450000] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
[    0.460000] Freeing unused kernel memory: 180k freed
- preinit -
- regular preinit -
jffs2 not ready yet; using ramdisk
- init -
CAL_TAG=0000000 1111                                   

Please press Enter to activate this console. Fri Oct 30 07:26:00 UTC 2015
[    8.920000] ar71xx: invalid MDIO id 1
[    9.340000] ag71xx_mdio: probed
[    9.350000] ag71xx_mdio: probed
[    9.360000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[    9.910000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd042, driver=Generic PHY]
[    9.920000] eth1: Atheros AG71xx at 0xba000000, irq 5
[   10.480000] eth1: Found an AR934X built-in switch
[   11.770000] PPP generic driver version 2.4.2
[   11.800000] asf: module license 'Proprietary' taints kernel.
[   11.800000] Disabling lock debugging due to kernel taint
[   11.880000] ****Address of trace_timer :83be25a0
[   12.150000] ath_hal: 0.9.17.1 (AR5416, AR9380, REGOPS_FUNC, WRITE_EEPROM, TX_DATA_SWAP, RX_DATA_SWAP, 11D)
[   12.180000] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
[   12.200000] ath_tx99: Version 2.0
[   12.200000] Copyright (c) 2010 Atheros Communications, Inc, All Rights Reserved
[   12.350000] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
[   13.860000] __ath_attach: Set global_scn[0]
[   13.860000] *** All the minfree values should be <= ATH_TXBUF-32, otherwise default value will be used instead ***
[   13.870000] ACBKMinfree = 48
[   13.880000] ACBEMinfree = 32
[   13.880000] ACVIMinfree = 16
[   13.880000] ACVOMinfree = 0
[   13.880000] CABMinfree = 48
[   13.890000] UAPSDMinfree = 0
[   13.890000] ATH_TXBUF=512
[   13.900000] Enterprise mode: 0x03bda000
[   13.910000] Restoring Cal data from DRAM
[   13.910000]
[   13.910000] -----------------2G Caldata--------------------
[   13.920000] 02 02 00 02 03 04 05 06 00 00 00 00 00 00 00 00
[   13.920000] -----------------------------------------------
[   13.920000]
[   13.930000] ath_get_caps[6160] rx chainmask mismatch actual 7 sc_chainmak 0
[   13.940000] ath_get_caps[6135] tx chainmask mismatch actual 7 sc_chainmak 0
[   13.960000] ath_tx_paprd_init sc 82f48000 PAPRD Enabled
[   13.960000] wifi0: Atheros 956X: mem=0xb8100000, irq=47
[   13.970000] ath_pci: 10.2.3.31 (Atheros/multi-bss)
[   13.970000] ath_pci_probe
[   13.980000] PCI device id is 0050 :0050
[   13.980000] ath_pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[   13.990000] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
[   14.000000] ath_pci 0000:00:00.0: ath DEBUG: sc=0x83ac5e00
[   14.000000]
[   14.000000]  ol_ath_pci_configure : num_desired MSI set to 0
[   14.010000]
[   14.010000]  Using PCI Legacy Interrupt
[   15.010000] CE_per_engine_handler_adjust, base=83ac5e00 offset=57400
[   15.010000] CE_per_engine_handler_adjust, base=83ac5e00 offset=57800
[   15.030000] __ol_ath_attach: ath_attach TODO
[   15.030000] __ol_ath_attach: dev name wifi1
[   15.040000] ol_ath_set_default_tgt_config : AC Minfree buffer allocation through module param (umac.ko)
[   15.050000]  OL_ACBKMinfree : 0
[   15.050000]  OL_ACBEMinfree : 0
[   15.060000]  OL_ACVIMinfree : 0
[   15.060000]  OL_ACVOMinfree : 0
[   15.060000] ol_ath_attach() BMI inited.
[   15.070000] ol_ath_attach() BMI Get Target Info.
[   15.070000] ol_ath_attach() TARGET TYPE: 7 Vers 0x4100016d
[   15.080000] NUM_DEV=1 FWMODE=0x2 FWSUBMODE=0x0 FWBR_BUF 0
[   15.080000] ol_ath_attach() configure Target .
[   15.090000]
[   15.090000] -----------------5G Caldata--------------------
[   15.090000] 44 08 CF 98 04 01 00 03 7F 12 34 56 00 00 1F 00
[   15.100000] -----------------------------------------------
[   15.100000]
[   15.110000] qc98xx_verify_checksum: flash checksum passed: 0x98cf
[   15.110000] ol_transfer_bin_file 2193: Download Flash data len 2116
[   15.120000] Swift firmware download
[   15.130000] ol_transfer_bin_file 2110: Download Firmware data len 224308
[   16.080000] ol_ath_attach() Download FW.
[   16.090000] ol_ath_attach() HT Create .
[   16.090000] ol_ath_attach() HIF Claim.
[   16.090000] ol_ath_attach() BMI Done.
[   16.100000] ol_ath_attach() WMI attached. wmi_handle 82ea0000
[   16.100000] +HWT
[   16.110000] SOC_RESET_CONTROL_ADDRESS : 800
[   16.110000] CPU_INTR_ADDRESS = [0]
[   16.110000] SOC_GLOBAL_RESET_ADDRESS = [0]
[   16.120000] Rx_Filter : [0]
[   16.120000] CE_per_engine_handler_adjust, base=83ac5e00 offset=57400
[   16.130000] CE_per_engine_handler_adjust, base=83ac5e00 offset=57800
[   16.130000] CE_per_engine_handler_adjust, base=83ac5e00 offset=57c00
[   16.140000] CE_per_engine_handler_adjust, base=83ac5e00 offset=58000
[   16.150000] CE_per_engine_handler_adjust, base=83ac5e00 offset=58400
[   16.160000] CE_per_engine_handler_adjust, base=83ac5e00 offset=58800
[   16.160000] CE_recv_buf_enqueue 653 Populate last entry 512 for CE 5
[   16.170000] CE_recv_buf_enqueue 662 CE 5 wi 511 dest_ptr 0x21ae820 nbytes 0 recv_ctxt 0x82182d80
[   16.180000] -HWT
[   16.180000] HTC Service:0x0300 ep:1 TX flow control disabled
[   16.190000] CE_pkt_dl_len_set CE 4 Pkt download length 64
[   16.200000] ol_txrx_pdev_attach: 1424 tx desc's allocated ; range starts from 81de0000
[   16.210000] HTC Service:0x0100 ep:2 TX flow control disabled
[   16.210000] wmi_service_ready_event_rx:  WMI UNIFIED SERVICE READY event
[   16.220000] num_rf_chain : 00000001
[   16.220000] ht_cap_info: : 0000085b
[   16.230000] vht_cap_info : 338001b2
[   16.230000] vht_supp_mcs : 0000fffe
[   16.230000] LARGE_AP enabled. num_peers 144, num_vdevs 16, num_tids 256
[   16.240000] idx 0 req 1  num_units 0 num_unit_info 2 unit size 408 actual units 145
[   16.250000] chunk 0 len 59160 requested ,ptr  0x1df0000
[   16.260000] FIRMWARE 145 V 16 T 443
[   16.260000]  
[   16.270000] wmi_ready_event_rx:  WMI UNIFIED READY event
[   16.270000] ol_ath_connect_htc() WMI is ready
[   16.280000] ol_ath_set_host_app_area TODO
[   16.280000] target uses HTT version 2.1; host uses 2.1
[   16.290000] ol_ath_attach() connect HTC.
[   16.300000] bypasswmi : 0
[   16.300000] ol_regdmn_start: reg-domain param: regdmn=0, countryName=, wModeSelect=FFFFFFFF, netBand=FFFFFFFF, extendedChanMode=0.
[   16.310000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
[   16.320000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
[   16.330000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
[   16.330000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
[   16.340000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
[   16.350000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
[   16.360000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
[   16.360000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
[   16.370000] Add VHT80 channel: 5210
[   16.370000] Add VHT80 channel: 5290
[   16.380000] Add VHT80 channel: 5530
[   16.380000] Add VHT80 channel: 5610
[   16.390000] Add VHT80 channel: 5690
[   16.390000] Add VHT80 channel: 5775
[   16.390000] Skipping VHT80 channel 5825
[   16.400000] ol_ath_phyerr_attach: called
[   16.400000] OL Resmgr Init-ed
[   16.410000] ol_ath_rtt_meas_report_attach: called
[   16.410000] ol_ath_attach() UMAC attach .
[   16.410000] __ol_ath_attach: init tx/rx TODO
[   16.420000] __ol_ath_attach: hard_header_len reservation 58
[   16.460000] GRE over IPv4 demultiplexor driver
[   16.560000] GRE over IPv4 tunneling driver
[   16.580000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.740000] xt_time: kernel timezone is -0000
[   16.810000] NET: Registered protocol family 24
[   17.100000] [wifi1] FWLOG: [20380] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x460, 0x460, 0x0 )
[   17.110000] [wifi1] FWLOG: [20380] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x460, 0x460, 0x0 )
[   17.120000] [wifi1] FWLOG: [20380] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x460, 0x460, 0x0 )
[   17.130000] [wifi1] FWLOG: [20380] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x460, 0x460, 0x0 )
[   17.140000] [wifi1] FWLOG: [20386] WHAL_ERROR_RECV_STOPPCU ( 0x110298a, 0x3 )
[   17.140000] [wifi1] FWLOG: [20386] WHAL_ERROR_RESET_PM (  )
[   17.150000] [wifi1] FWLOG: [20539] ANI Enable:  1
[   17.360000] nf_conntrack_rtsp v0.6.21 loading
[   17.380000] nf_nat_rtsp v0.6.21 loading
[   17.410000] Registered character driver slp_gpio_chrdev
[   18.560000] lan ip is 0xc0a80101
uci: Entry not found (protocol.wan.macaddr)
[CFG_MAC]user did not configured wan mac, use default.
Command failed: Not found
Command failed: Not found
[   22.170000] device eth1 entered promiscuous mode
[   22.770000] eth1: link up (1000Mbps/Full duplex)
[   22.770000] br-lan: port 1(eth1) entered forwarding state
[   22.780000] br-lan: port 1(eth1) entered forwarding state
[   24.780000] br-lan: port 1(eth1) entered forwarding state
Write Reg: 0x00000054: Oldval = 0x24696850 Newval = 0x24696850
Write Reg: 0x00000058: Oldval = 0x000f0001 Newval = 0x000f0001
Write Reg: 0x00000050: Oldval = 0x58160002 Newval = 0x5816000a
Enable device[wifi0] phy_change[1] all_vifs[ath0 guest_2g wdscli0] enabled_vifs[ath0] changed_vifs[ath0 guest_2g wdscli0]
[   27.860000] set maxsta of phy: 32
[   27.920000] wlan_vap_create : enter. devhandle=0x83be8380, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   27.920000] wlan_vap_create : exit. devhandle=0x83be8380, opmode=IEEE80211_M_HOSTAP, flags=0x1.
[   27.930000] VAP device ath0 created osifp: (81ff0b80) os_if: (8181c000)
[   27.970000] Set freq vap stop send + 8181c000
[   27.980000] Set freq vap stop send -8181c000
[   28.110000] Set wait done --8181c000
[   28.120000] wlan_vap_create : enter. devhandle=0x83be8380, opmode=IEEE80211_M_HOSTAP, flags=0x1
[   28.130000] wlan_vap_create : exit. devhandle=0x83be8380, opmode=IEEE80211_M_HOSTAP, flags=0x1.
[   28.140000] VAP device guest0 created osifp: (81fbb380) os_if: (81814000)
[   28.180000] Set freq vap stop send + 8181c000
[   28.180000] Set freq vap stop send -8181c000
[   28.320000] Set wait done --8181c000
[   28.320000] Set freq vap stop send + 81814000
[   28.330000] Set freq vap stop send -81814000
[   28.460000] Set wait done --81814000
[   28.470000] wlan_vap_create : enter. devhandle=0x83be8380, opmode=IEEE80211_M_STA, flags=0x1
[   28.480000] wlan_vap_create : exit. devhandle=0x83be8380, opmode=IEEE80211_M_STA, flags=0x1.
[   28.490000] VAP device wdscli0 created osifp: (81fb9b80) os_if: (81858000)
[   28.570000] Setting Max Stations:32
[   28.650000]  
[   28.650000]  DES SSID SET=
[   28.660000]  
[   28.660000]  DES SSID SET=TP-LINK_5816
[   28.730000] Setting Max Stations:31
[   28.790000]  
[   28.790000]  DES SSID SET=
[   28.800000]  
[   28.800000]  DES SSID SET=TPGuest_5816
[   29.040000] 8021q: adding VLAN 0 to HW filter on device ath0
[   29.820000] device ath0 entered promiscuous mode
[   29.830000] br-lan: port 2(ath0) entered forwarding state
[   29.830000] br-lan: port 2(ath0) entered forwarding state
[   30.000000] 8021q: adding VLAN 0 to HW filter on device guest0
[   30.770000] device guest0 entered promiscuous mode
[   30.780000] br-lan: port 3(guest0) entered forwarding state
[   30.780000] br-lan: port 3(guest0) entered forwarding state
[   31.860000] br-lan: port 2(ath0) entered forwarding state
[   31.880000] br-lan: port 3(guest0) entered disabled state
Enable device[wifi1] phy_change[1] all_vifs[ath1 wdscli1] enabled_vifs[ath1] changed_vifs[ath1 wdscli1]
[   32.000000] isCountryCodeValid: EEPROM regdomain 0x0
[   32.010000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2) flags 0x2150
[   32.010000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4) flags 0xa0
[   32.020000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x8) flags 0xc0
[   32.030000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x20) flags 0xd0
[   32.030000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x40) flags 0x150
[   32.040000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x800) flags 0x10080
[   32.050000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x2000) flags 0x20080
[   32.060000] ol_regdmn_init_channels: !avail mode 0x1f9001 (0x4000) flags 0x40080
[   32.070000] Add VHT80 channel: 5775
[   32.070000] Skipping VHT80 channel 5825
[   32.110000] set maxsta of phy: 32
[   32.120000] ath_ioctl: SIOC80211IFCREATE CALLED
[   32.120000] wmi_unified_vdev_create_send: ID = 0 VAP Addr = 00:00:00:00:00:00:
[   32.130000] Setting dscp for vap id: 0
[   32.140000] VAP device ath1 created osifp: (818a2380) os_if: (818c0000)
[   32.180000] Following channels are blocked from Channel selection algorithm  
[   32.190000] [36] [40] [44] [48]
[   32.200000] Set freq vap stop send + 818c0000
[   32.200000] OL vap_stop +
[   32.210000] wmi_unified_vdev_stop_send for vap 0 (82ea0000)
[   32.210000] OL vap_stop -
[   32.220000] STOPPED EVENT for vap 0 (82ea0000)
[   32.220000] Set freq vap stop send -818c0000
[   32.350000] Set wait done --818c0000
[   32.360000] ath_ioctl: SIOC80211IFCREATE CALLED
[   32.360000] wmi_unified_vdev_create_send: ID = 1 VAP Addr = 00:00:00:00:00:00:
[   32.370000] wmi_unified_set_psmode:set psmode=1
[   32.380000] Setting dscp for vap id: 1
[   32.380000] VAP device wdscli1 created osifp: (81fccb80) os_if: (81904000)
[   32.460000] Setting Max Stations:32
[   32.510000] ol_ath_desc_alloc_and_mark_for_mcast_clone: VAP Mcast to Unicast buffer allocated: 400
[   32.520000] ol_ath_vap_set_param: VAP param is now supported param:66 value:2
[   32.550000]  
[   32.550000]  DES SSID SET=
[   32.560000]  
[   32.560000]  DES SSID SET=TP-LINK_5G_5816
[   32.640000] OL vap_stop +
[   32.640000] wmi_unified_vdev_stop_send for vap 0 (82ea0000)
[   32.640000] OL vap_stop -
[   32.650000] STOPPED EVENT for vap 0 (82ea0000)
[   32.780000] wmi_unified_scan_start_send for vap 0 (82ea0000)
[   32.780000] 8021q: adding VLAN 0 to HW filter on device ath1
[   33.550000] device ath1 entered promiscuous mode
[   33.560000] br-lan: port 4(ath1) entered forwarding state
[   33.560000] br-lan: port 4(ath1) entered forwarding state
[   34.280000] OL vap_start +
[   34.290000] wmi_unified_vdev_start_send for vap 0 (82ea0000)
[   34.290000] OL vap_start -
[   34.300000] ol_vdev_start_resp_ev for vap 0 (82ea0000)
[   34.300000] ol_ath_vap_join: join operation is only for STA/IBSS mode
[   34.310000] ol_ath_wmm_update:
[   34.310000] wmi_unified_vdev_up_send for vap 0 (82ea0000)
[   34.320000] Notification to UMAC VAP layer
[   34.710000] [stat]Lan ip: C0A80101, Lan mask: FFFFFF00
[   34.720000] [stat]wan dev name: eth0
[   34.920000] ----IGMP init begin------
[   34.920000] wan_dev_index = 255 lan_dev_name=br-lan wan_dev_name=eth0
[   34.930000] ----IGMP has been loaded------
[   35.560000] br-lan: port 4(ath1) entered forwarding state
wlan has already started in etc/init.d/network script.
Loading redirects
Loading dmz
Loading forbidhost
Loading localmanage
Loading hostctrl
Loading includes
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
uci: Entry not found (guest_network.@guest_rule_2g[0])
uci: Entry not found (guest_network.@guest_rule_5g[0])
not ap mode, ignored.
not ap mode, ignored.
uci: Entry not found (guest_network.@guest_rule_2g[0])
uci: Entry not found (guest_network.@guest_rule_5g[0])
[   43.250000] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[   43.260000] jffs2_build_filesystem(): unlocking the mtd device... done.
[   43.260000] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[   49.070000] JFFS2 notice: (3692) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
copying files ... done

mrs***

据说在这一步：Autobooting in 1 seconds
按“tpl”可以中断UBOOT