|
帮忙看看我的k3 是啥闪存 返修回来,以前也是这个 刷完梅林 直接刷回官改 重启死机 已经两次返厂了都是因为直接涮官改
劝涮梅林的朋友 最好LEDE 过渡一下
[ 0.037290] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.038587] bounce: pool size: 64 pages
[ 0.038599] io scheduler noop registered
[ 0.038604] io scheduler deadline registered (default)
[ 0.039072] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.039539] console [ttyS0] disabled
[ 0.039583] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 18, base_baud = 7812500) is a 16550
[ 0.503376] console [ttyS0] enabled
[ 0.507223] 18000400.serial: ttyS1 at MMIO 0x18000400 (irq = 18, base_baud = 7812500) is a 16550
[ 0.516861] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
[ 0.523255] nand: Macronix MX30LF1G18AC
[ 0.527094] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.534696] iproc_nand 18028000.nand: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
[ 0.544645] Scanning device for bad blocks
[ 0.566961] random: fast init done
[ 1.558814] random: crng init done
[ 1.698418] 4 bcm47xxpart partitions found on MTD device brcmnand.0
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?立即注册
×
|