设为首页收藏本站

恩山无线论坛

 找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
楼主: hackpascal

【2017-09-21】AR/QCA/MTK Breed,功能强大的多线程 Bootloader

    [复制链接]
发表于 2015-8-15 09:55 | 显示全部楼层
我的恩山、我的无线 The best wifi forum is right here.
 楼主| 发表于 2015-8-15 10:36 | 显示全部楼层
liveasx 发表于 2015-8-15 05:17
看了多个楼层反映,这不是一个简单问题
硬件:840N V1 AR7241+9287    U-breed 08-06
刷入目前最新XM.v5 ...

1. 你不需要用红色专门标出你的成语用错了
2. 这问题我知道,你就别用新版本的

点评

H大大,刷您的breed,会覆盖原机eeprom么,怎么备份原机eeprom啊?求大大科普一下。  详情 回复 发表于 2017-4-7 06:54
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-15 17:55 | 显示全部楼层
hackpascal 发表于 2015-7-3 16:12
我做的breed,错误信息我都看不懂?
120%的准确性是复位键不对
自己参考本贴5楼的方法测试复位键

谢谢! 已出ubnt专用的breed,测试正常,但是LAN网口等不显示。好郁闷的,忘尽快解决!
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-15 18:00 | 显示全部楼层
希望楼主发出更新日志,这样才知道哪些ubg已经被解决了!谢谢谢谢谢谢!

点评

你是不是不看帖 我不回答你  发表于 2015-8-16 00:03
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-15 20:27 | 显示全部楼层
最新版76200-mw300rv6的breed应该有问题的,我的机子刷完后,全部灯亮,挂了。之前刷reset1是正常的~
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-15 21:23 | 显示全部楼层
WNDR4300 准备走起来。。。
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-16 00:26 | 显示全部楼层
楼主,有个问题想和你确认一下。

我使用的设备是 磊科 NO1
刷Bread(breed-mt7620-reset1.bin)后,有一些问题,情况如下。我先刷的版本的是 0719的版本,进入Bread升级Bread本身或者更新固件以后,自动重启如果不断电,那么内存会识别错误,变成32M,这样就造成原来的固件启动不起来,启动到一定程度就崩溃了。一开始我以为Bread不支持原先可用的固件了,后来接TTL才发现这个情况。第一个输出贴的是更新bread后的情况。第二个贴的是更新固件后的情况,可以看到TTL输出 ,更新以后内存识别错误。

1.更新Bread:
  1. Boot and Recovery Environment for Embedded Devices
  2. Copyright (C) 2015 HackPascal <[email protected]>
  3. Build date 2015-07-19 [git-6be20b6]
  4. Version 1.0 (r647)

  5. DRAM: 128MB
  6. Platform: MediaTek MT7620A ver 2, eco 3
  7. Board: Reference design
  8. Clocks: CPU: 580MHz, Bus: 193MHz
  9. Flash: Winbond W25Q128 (16MB) on rt2880-spi
  10. rt2880-eth: Using MAC address 00:0c:43:76:20:77
  11. eth0: MediaTek MT7620A built-in 5-port 10/100M switch

  12. Network started on eth0, inet addr 192.168.1.1, netmask 255.255.255.0

  13. Press any key to interrupt autoboot ... 2
  14. Auto boot aborted.

  15. Starting breed built-in shell

  16. breed> Upgrade completed.
  17. Resetting ...
  18. Boot and Recovery Environment for Embedded Devices
  19. Copyright (C) 2015 HackPascal <[email protected]>
  20. Build date 2015-08-06 [git-e769848]
  21. Version 1.0 (r708)

  22. DRAM: 32MB
  23. Platform: MediaTek MT7620A ver 2, eco 3
  24. Board: Reference design
  25. Clocks: CPU: 580MHz, Bus: 193MHz
  26. Flash: Winbond W25Q128 (16MB) on rt2880-spi
  27. rt2880-eth: Using MAC address 00:0c:43:76:20:77
  28. eth0: MediaTek MT7620A built-in 5-port 10/100M switch

  29. Network started on eth0, inet addr 192.168.1.1, netmask 255.255.255.0

  30. Press any key to interrupt autoboot ... 0

  31. Trying to boot firmware from 0x00050000 in flash bank 0 ...
  32. Reading data into memory ...
  33. U-Boot firmware image header detected.
  34.     Image Name:         RT-N14U
  35.     Data Size:    6999174 Bytes
  36.     Load Address: 80000000
  37.     Entry Point:  80295890
  38. Uncompressing data (LZMA) ... done.
  39. Flushing cache ... done.

  40. Starting kernel at 0x80295890...


  41. LINUX started...
  42. Linux version 3.4.107 ([email protected]) (gcc version 4.4.7 (GCC) ) #2 Mon Jun 1 15:43:19 KRAT 2015

  43. Ralink SoC: MT7620A, RevID: 0203, RAM: DDR2, XTAL: 20MHz
  44. CPU/SYS frequency: 580/193 MHz
  45. CPU revision is: 00019650 (MIPS 24KEc)
  46. Determined physical RAM map:
  47. memory: 04000000 @ 00000000 (usable)
  48. Zone PFN ranges:
  49.   Normal   0x00000000 -> 0x00004000
  50. Movable zone start PFN for each node
  51. Early memory PFN ranges
  52.     0: 0x00000000 -> 0x00004000
  53. Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  54. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  55. Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 16256
  56. Kernel command line: console=ttyS0,57600n8 root=/dev/mtdblock4 rootfstype=squashfs
  57. PID hash table entries: 256 (order: -2, 1024 bytes)
  58. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  59. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  60. Writing ErrCtl register=0005e2c8
  61. Readback ErrCtl register=0005e2c8
  62. Memory: 61588k/65536k available (2667k kernel code, 3948k reserved, 413k data, 164k init, 0k highmem)
  63. NR_IRQS:64
  64. console [ttyS0] enabled
  65. Calibrating delay loop... 385.02 BogoMIPS (lpj=770048)
  66. pid_max: default: 32768 minimum: 301
  67. Mount-cache hash table entries: 512
  68. NET: Registered protocol family 16
  69. bio: create slab <bio-0> at 0
  70. SCSI subsystem initialized
  71. usbcore: registered new interface driver usbfs
  72. usbcore: registered new interface driver hub
  73. usbcore: registered new device driver usb
  74. Switching to clocksource MIPS
  75. NET: Registered protocol family 2
  76. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  77. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  78. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  79. TCP: Hash tables configured (established 2048 bind 2048)
  80. TCP: reno registered
  81. UDP hash table entries: 256 (order: 0, 4096 bytes)
  82. NET: Registered protocol family 1
  83. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  84. msgmni has been set to 120
  85. io scheduler noop registered (default)
  86. Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  87. serial8250: ttyS0 at MMIO 0x10000c00 (irq = 12) is a 16550A
  88. Ralink GPIO driver initialized. Number of GPIO: 73, GPIO mode: 005A971D
  89. loop: module loaded
  90. Ralink SPI flash driver, SPI clock: 24MHz
  91. SPI flash chip: W25Q128BV (ef 40180000) (16384 Kbytes)
  92. Creating 7 MTD partitions on "raspi":
  93. 0x000000000000-0x000000030000 : "Bootloader"
  94. 0x000000030000-0x000000040000 : "Config"
  95. 0x000000040000-0x000000050000 : "Factory"
  96. 0x000000050000-0x000000164c10 : "Kernel"
  97. 0x000000164c10-0x000000fc0000 : "RootFS"
  98. 0x000000fc0000-0x000001000000 : "Storage"
  99. 0x000000050000-0x000000fc0000 : "Firmware_Stub"
  100. tun: Universal TUN/TAP device driver, 1.6
  101. tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  102. Ralink APSoC Ethernet Driver v3.2.1 (raeth)
  103. raeth: PDMA RX ring 256, PDMA TX ring 512. Max packet size 1536
  104. raeth: NAPI support, weight 32
  105. raeth: Byte Queue Limits (BQL) support
  106. PPP generic driver version 2.4.2
  107. PPP MPPE Compression module registered
  108. NET: Registered protocol family 24
  109. PPTP driver version 0.8.5
  110. usbcore: registered new interface driver libusual
  111. nf_conntrack version 0.5.0 (16384 buckets, 32768 max)
  112. xt_time: kernel timezone is -0000
  113. gre: GRE over IPv4 demultiplexor driver
  114. ip_tables: (C) 2000-2006 Netfilter Core Team
  115. TCP: cubic registered
  116. NET: Registered protocol family 10
  117. ip6_tables: (C) 2000-2006 Netfilter Core Team
  118. IPv6 over IPv4 tunneling driver
  119. NET: Registered protocol family 17
  120. Bridge firewalling registered
  121. L2TP core driver, V2.0
  122. PPPoL2TP kernel driver, V2.0
  123. 8021q: 802.1Q VLAN Support v1.8
  124. ASUS NVRAM, v0.08. Available space: 61440. Integrity: OK
  125. VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  126. Freeing unused kernel memory: 164k freed
  127. Algorithmics/MIPS FPU Emulator v1.5
  128. validate subfs:
  129. rt2860v2_ap: module license 'Proprietary' taints kernel.
  130. CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc == 8006d9a0, ra == 8006dcc8
  131. Oops[#1]:
  132. Cpu 0
  133. $ 0   : 00000000 00000000 81082108 81082100
  134. $ 4   : 00000001 8108210c 00000280 00002fa1
  135. $ 8   : 80301eb0 00000001 00000020 80301ed4
  136. $12   : 80301ed4 00000000 00000000 ffffff80
  137. $16   : 00000001 003fffff 83ac8000 80340000
  138. $20   : 00000000 00000000 00000000 00000008
  139. $24   : 80301ed4 8014491c
  140. $28   : 83ac8000 83ac9c88 ffffffec 8006dcc8
  141. Hi    : 00000000
  142. Lo    : 83728000
  143. epc   : 8006d9a0 0x8006d9a0
  144.     Tainted: P
  145. ra    : 8006dcc8 0x8006dcc8
  146. Status: 1100ff02    KERNEL EXL
  147. Cause : 00800008
  148. BadVA : 00000004
  149. PrId  : 00019650 (MIPS 24KEc)
  150. Modules linked in:
  151. Process modprobe (pid: 326, threadinfo=83ac8000, task=83ca8d20, tls=77213440)
  152. Stack : 00000000 803379a4 83ac8000 00000100 00000041 00000002 80301eb0 00000002
  153.         8108210c 803020fc 00000001 8030246c 00000001 00000000 00000001 00000002
  154.         ffffffff 00000002 00000000 00000001 802f1e40 83ad6b80 00000000 00002000
  155.         c0000000 c0000000 80302468 00000000 00000000 8030246c 00000000 00000000
  156.         000002d2 000202d2 00000004 8006decc 000202d2 00000000 83ac9d20 83ac9d20
  157.         ...
  158. Call Trace:[<8006decc>] 0x8006decc
  159. [<8005d1fc>] 0x8005d1fc
  160. [<8008e52c>] 0x8008e52c
  161. [<8008f2bc>] 0x8008f2bc
  162. [<8000978c>] 0x8000978c
  163. [<8008f1a0>] 0x8008f1a0
  164. [<8005d1fc>] 0x8005d1fc
  165. [<8008f490>] 0x8008f490
  166. [<8005d1fc>] 0x8005d1fc
  167. [<8008f5b0>] 0x8008f5b0
  168. [<8005d1fc>] 0x8005d1fc
  169. [<8005d1fc>] 0x8005d1fc
  170. [<8005f384>] 0x8005f384
  171. [<8005f390>] 0x8005f390
  172. [<8009b9c4>] 0x8009b9c4
  173. [<8009afb4>] 0x8009afb4
  174. [<800106e4>] 0x800106e4
  175. [<80128c18>] 0x80128c18


  176. Code: 00771021  8c5e0008  27deffec <8fc20018> 8fc40014  3c050010  3c060020  34a50100  34c60200
  177. ---[ end trace c58171e7c0b10c56 ]---
  178. Fatal exception: panic in 5 seconds
  179. CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 8003bbf8, ra == 80030b2c
  180. Oops[#2]:
  181. Cpu 0
  182. $ 0   : 00000000 00000000 81082200 ffffff00
  183. $ 4   : 00000000 00000000 802f6e8c 8003bf4c
  184. $ 8   : 802f8db4 eb9d780b 00000007 edb88320
  185. $12   : 88aa42a7 0000000e 00000007 802ebd48
  186. $16   : 80337b00 00000000 802f0000 802ea000
  187. $20   : 8033830c 00200200 80300000 8033850c
  188. $24   : 802aa910 000033d0
  189. $28   : 802ea000 802ebd20 8033870c 80030b2c
  190. Hi    : 0011ad9a
  191. Lo    : 0f65e9d8
  192. epc   : 8003bbf8 0x8003bbf8
  193.     Tainted: P      D
  194. ra    : 80030b2c 0x80030b2c
  195. Status: 1100ff03    KERNEL EXL IE
  196. Cause : 00800008
  197. BadVA : 00000000
  198. PrId  : 00019650 (MIPS 24KEc)
  199. Modules linked in:
  200. Process swapper (pid: 0, threadinfo=802ea000, task=802f0730, tls=00000000)
  201. Stack : 00000000 00000001 00000000 00000005 00000002 00000000 00000001 80337b00
  202.         802ebd60 80030b2c 00000005 00000002 802f47f8 80060030 00000001 802f0000
  203.         802ebd60 802ebd60 8033890c 8003bf4c 00000100 00010000 00000000 803379a4
  204.         802ea000 00000100 803379a0 802f3b94 00000020 0000000a 80330000 8002a254
  205.         00000000 80064934 802f47f8 80062ea4 00000001 00000000 fffedec4 802ea008
  206.         ...
  207. Call Trace:[<80030b2c>] 0x80030b2c
  208. [<80060030>] 0x80060030
  209. [<8003bf4c>] 0x8003bf4c
  210. [<8002a254>] 0x8002a254
  211. [<80064934>] 0x80064934
  212. [<80062ea4>] 0x80062ea4
  213. [<80320000>] 0x80320000
  214. [<80295890>] 0x80295890
  215. [<8002a50c>] 0x8002a50c
  216. [<80320000>] 0x80320000
  217. [<8000978c>] 0x8000978c
  218. [<8004cef0>] 0x8004cef0
  219. [<80320000>] 0x80320000
  220. [<80295890>] 0x80295890
  221. [<8004d13c>] 0x8004d13c
  222. [<80295890>] 0x80295890
  223. [<8000b664>] 0x8000b664
  224. [<80295890>] 0x80295890
  225. [<8000938c>] 0x8000938c
  226. [<80295988>] 0x80295988
  227. [<803039bc>] 0x803039bc
  228. [<803033dc>] 0x803033dc


  229. Code: 00a08821  afbf0024  afb0001c <8e220000> 30430040  14600074  00c02821  30430002  14600034
  230. ---[ end trace c58171e7c0b10c57 ]---
  231. Kernel panic - not syncing: Fatal exception in interrupt
  232. Rebooting in 1 seconds..
  233. Boot and Recovery Environment for Embedded Devices
  234. Copyright (C) 2015 HackPascal <[email protected]>
  235. Build date 2015-08-06 [git-e769848]
  236. Version 1.0 (r708)
复制代码


2.更新固件
  1. Boot and Recovery Environment for Embedded Devices
  2. Copyright (C) 2015 HackPascal <[email protected]>
  3. Build date 2015-08-06 [git-e769848]
  4. Version 1.0 (r708)

  5. DRAM: 128MB
  6. Platform: MediaTek MT7620A ver 2, eco 3
  7. Board: Reference design
  8. Clocks: CPU: 580MHz, Bus: 193MHz
  9. Flash: Winbond W25Q128 (16MB) on rt2880-spi
  10. rt2880-eth: Using MAC address 00:0c:43:76:20:77
  11. eth0: MediaTek MT7620A built-in 5-port 10/100M switch

  12. Network started on eth0, inet addr 192.168.1.1, netmask 255.255.255.0

  13. Press any key to interrupt autoboot ... 4
  14. Auto boot aborted.

  15. Starting breed built-in shell

  16. breed> Upgrade completed.
  17. Rebooting in 2 seconds ...
  18. Resetting ...
  19. Boot and Recovery Environment for Embedded Devices
  20. Copyright (C) 2015 HackPascal <[email protected]>
  21. Build date 2015-08-06 [git-e769848]
  22. Version 1.0 (r708)

  23. DRAM: 32MB
  24. Platform: MediaTek MT7620A ver 2, eco 3
  25. Board: Reference design
  26. Clocks: CPU: 580MHz, Bus: 193MHz
  27. Flash: Winbond W25Q128 (16MB) on rt2880-spi
  28. rt2880-eth: Using MAC address 00:0c:43:76:20:77
  29. eth0: MediaTek MT7620A built-in 5-port 10/100M switch

  30. Network started on eth0, inet addr 192.168.1.1, netmask 255.255.255.0

  31. Press any key to interrupt autoboot ... 0

  32. Trying to boot firmware from 0x00050000 in flash bank 0 ...
  33. Reading data into memory ...
  34. U-Boot firmware image header detected.
  35.     Image Name:         RT-N14U-GPIO-1-OYE01-12
  36.     Data Size:    10104381 Bytes
  37.     Load Address: 80000000
  38.     Entry Point:  802afbe0
  39. Uncompressing data (LZMA) ... done.
  40. Flushing cache ... done.

  41. Starting kernel at 0x802afbe0...


  42. LINUX started...
  43. Linux version 3.4.108 ([email protected]) (gcc version 4.4.7 (GCC) ) #2 Sat Aug 1 16:36:48 CST 2015

  44. Ralink SoC: MT7620A, RevID: 0203, RAM: DDR2, XTAL: 20MHz
  45. CPU/SYS frequency: 580/193 MHz
  46. CPU revision is: 00019650 (MIPS 24KEc)
  47. Determined physical RAM map:
  48. memory: 08000000 @ 00000000 (usable)
  49. Zone PFN ranges:
  50.   Normal   0x00000000 -> 0x00008000
  51. Movable zone start PFN for each node
  52. Early memory PFN ranges
  53.     0: 0x00000000 -> 0x00008000
  54. Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  55. Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  56. Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 32512
  57. Kernel command line: console=ttyS0,57600n8 root=/dev/mtdblock4 rootfstype=squashfs
  58. PID hash table entries: 512 (order: -1, 2048 bytes)
  59. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  60. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  61. Writing ErrCtl register=0005e240
  62. Readback ErrCtl register=0005e240
  63. Memory: 126340k/131072k available (2772k kernel code, 4732k reserved, 532k data, 164k init, 0k highmem)
  64. NR_IRQS:40
  65. console [ttyS0] enabled
  66. Calibrating delay loop... 385.02 BogoMIPS (lpj=770048)
  67. pid_max: default: 32768 minimum: 301
  68. Mount-cache hash table entries: 512
  69. NET: Registered protocol family 16
  70. bio: create slab <bio-0> at 0
  71. SCSI subsystem initialized
  72. usbcore: registered new interface driver usbfs
  73. usbcore: registered new interface driver hub
  74. usbcore: registered new device driver usb
  75. Switching to clocksource MIPS
  76. NET: Registered protocol family 2
  77. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  78. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  79. TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  80. TCP: Hash tables configured (established 4096 bind 4096)
  81. TCP: reno registered
  82. UDP hash table entries: 256 (order: 0, 4096 bytes)
  83. NET: Registered protocol family 1
  84. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  85. msgmni has been set to 246
  86. io scheduler noop registered (default)
  87. Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  88. serial8250: ttyS0 at MMIO 0x10000c00 (irq = 12) is a 16550A
  89. Ralink GPIO driver initialized. Number of GPIO: 73, GPIO mode: 005A171D
  90. loop: module loaded
  91. Ralink SPI flash driver, SPI clock: 24MHz
  92. SPI flash chip: W25Q128BV (ef 40180000) (16384 Kbytes)
  93. Creating 7 MTD partitions on "raspi":
  94. 0x000000000000-0x000000030000 : "Bootloader"
  95. 0x000000030000-0x000000040000 : "Config"
  96. 0x000000040000-0x000000050000 : "Factory"
  97. 0x000000050000-0x00000017e310 : "Kernel"
  98. 0x00000017e310-0x000000fc0000 : "RootFS"
  99. 0x000000fc0000-0x000001000000 : "Storage"
  100. 0x000000050000-0x000000fc0000 : "Firmware_Stub"
  101. tun: Universal TUN/TAP device driver, 1.6
  102. tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  103. Ralink APSoC Ethernet Driver v3.2.1 (raeth)
  104. raeth: PDMA RX ring 256, PDMA TX ring 512. Max packet size 1536
  105. raeth: NAPI support, weight 32
  106. raeth: Byte Queue Limits (BQL) support
  107. PPP generic driver version 2.4.2
  108. PPP MPPE Compression module registered
  109. NET: Registered protocol family 24
  110. PPTP driver version 0.8.5
  111. usbcore: registered new interface driver libusual
  112. mtk-sd: MediaTek SD/MMC Card driver init
  113. sdhci: Secure Digital Host Controller Interface driver
  114. sdhci: Copyright(c) Pierre Ossman
  115. sdhci-pltfm: SDHCI platform and OF driver helper
  116. nf_conntrack version 0.5.0 (16384 buckets, 32768 max)
  117. xt_time: kernel timezone is -0000
  118. Bridge firewalling registered
  119. gre: GRE over IPv4 demultiplexor driver
  120. ip_tables: (C) 2000-2006 Netfilter Core Team
  121. TCP: cubic registered
  122. NET: Registered protocol family 10
  123. ip6_tables: (C) 2000-2006 Netfilter Core Team
  124. IPv6 over IPv4 tunneling driver
  125. NET: Registered protocol family 17
  126. L2TP core driver, V2.0
  127. PPPoL2TP kernel driver, V2.0
  128. 8021q: 802.1Q VLAN Support v1.8
  129. ASUS NVRAM, v0.08. Available space: 61440. Integrity: OK
  130. VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  131. Freeing unused kernel memory: 164k freed
  132. Algorithmics/MIPS FPU Emulator v1.5
  133. validate subfs:
  134. rt2860v2_ap: module license 'Proprietary' taints kernel.
  135. Unhandled kernel unaligned access[#1]:
  136. Cpu 0
  137. $ 0   : 00000000 00000000 6c252064 811020a8
  138. $ 4   : 6c25203d 00000007 811020a0 00000001
  139. $ 8   : 00200200 00100100 80370000 ffffffff
  140. $12   : 0000000a 9c66831f 3b977c29 dd556495
  141. $16   : 80339b80 810e1ce0 00000001 00000007
  142. $20   : 00000000 811020ac 00000007 810e1cf4
  143. $24   : c084eee3 8004cb5c
  144. $28   : 87ad0000 87ad1dc8 ffffff80 8006c898
  145. Hi    : 00000000
  146. Lo    : 9d5b3400
  147. epc   : 8006bd08 0x8006bd08
  148.     Tainted: P
  149. ra    : 8006c898 0x8006c898
  150. Status: 1100ff02    KERNEL EXL
  151. Cause : 00800014
  152. BadVA : 6c252041
  153. PrId  : 00019650 (MIPS 24KEc)
  154. Modules linked in: rt2860v2_ap(P+)
  155. Process modprobe (pid: 339, threadinfo=87ad0000, task=87cb48e8, tls=77453440)
  156. Stack : 80370000 80038c6c 87a27180 87ad1e30 8032fdd0 87c3f900 00000000 87ad1de4
  157.         c018ffff 000007b6 8784c600 870e6cdc 870e6c18 802b8fd0 810ed340 00000000
  158.         00000000 00000001 811020a0 80330000 802b8fec 00000000 80330000 8006c898
  159.         870e6bd0 00000007 8032fdd0 87c3f900 0000000b 87a27400 870e6c18 802b8fd0
  160.         870e6bdc 8008e78c 870e6bd0 870e6cdc 870e6c18 802b8fd0 c0064000 00000001
  161.         ...
  162. Call Trace:[<80038c6c>] 0x80038c6c
  163. [<8006c898>] 0x8006c898
  164. [<8008e78c>] 0x8008e78c
  165. [<8005f0f4>] 0x8005f0f4
  166. [<80010d64>] 0x80010d64
  167. [<801288d8>] 0x801288d8


  168. Code: 26f1ffec  8e220018  8e240014 <ac820004> ac440000  ae290014  ae280018  8eefffec  31e2c000
  169. ---[ end trace 724649b6332c37f9 ]---
  170. Fatal exception: panic in 5 secondsUnhandled kernel unaligned access[#2]:
  171. Cpu 0
  172. $ 0   : 00000000 00000001 811020ac 811020a0
  173. $ 4   : 00414952 00100100 00200200 00006ec6
  174. $ 8   : 80339b80 00000001 00000000 00000605
  175. $12   : 8781fa50 00000001 00000000 0047b9a0
  176. $16   : 00000001 003fffff 877c4000 80370000
  177. $20   : 00000000 00000000 00000000 00000008
  178. $24   : 00000023 777772f0
  179. $28   : 877c4000 877c5ca8 810e1fc0 8006d6e8
  180. Hi    : 000002e9
  181. Lo    : 000353dd
  182. epc   : 8006d3d8 0x8006d3d8
  183.     Tainted: P      D
  184. ra    : 8006d6e8 0x8006d6e8
  185. Status: 1100ff02    KERNEL EXL
  186. Cause : 00800014
  187. BadVA : 00414956
  188. PrId  : 00019650 (MIPS 24KEc)
  189. Modules linked in: rt2860v2_ap(P+)
  190. Process mdev (pid: 340, threadinfo=877c4000, task=87bb99e8, tls=77844440)
  191. Stack : 87b87408 87f00000 811223a8 800b2894 00000041 00000003 80339b80 800b1f04
  192.         811020ac 80339dcc 00000001 8033a13c 00000001 00000000 00000001 87badbb8
  193.         ffffffff 877c5e70 52c35a82 30e03511 87badb38 80330000 00000000 800f2818
  194.         87badbb8 877c5e70 8033a138 00000000 00000001 8033a13c 00000000 00000000
  195.         000200da 000200da 877c5f30 8006d8ec 000200da 00000000 877c5dc0 87999438
  196.         ...
  197. Call Trace:[<800b2894>] 0x800b2894
  198. [<800b1f04>] 0x800b1f04
  199. [<800f2818>] 0x800f2818
  200. [<8006d8ec>] 0x8006d8ec
  201. [<80097f30>] 0x80097f30
  202. [<800a561c>] 0x800a561c
  203. [<800a4340>] 0x800a4340
  204. [<800a8c6c>] 0x800a8c6c
  205. [<80083694>] 0x80083694
  206. [<800a9254>] 0x800a9254
  207. [<80009780>] 0x80009780
  208. [<80083968>] 0x80083968
  209. [<80012c98>] 0x80012c98
  210. [<8008879c>] 0x8008879c
  211. [<8003240c>] 0x8003240c
  212. [<80097a68>] 0x80097a68
  213. [<80088a18>] 0x80088a18
  214. [<80009780>] 0x80009780


  215. Code: 3c060020  34a50100  34c60200 <ac820004> ac440000  afc50014  afc60018  8c620000  2442ffff
  216. ---[ end trace 724649b6332c37fa ]---
  217. Fatal exception: panic in 5 seconds
  218. Kernel panic - not syncing: Fatal exception
  219. Rebooting in 1 seconds..
复制代码



但是断电以后再启动,就又会正常识别128M内存。 验证这个问题时,刷回你出品的老的u-boot,是没有这个问题的。 你有空有否查一下。

点评

报告一下 [2015-08-21 r717] 版的情况, 1、在bread更新bread后,似乎正常了。可以正常识别内存大小。 2、在bread更新固件后重启,被识别成64M了,和以前被识别成32M有所不同; 3、软重启还是老样子,被识  详情 回复 发表于 2015-8-21 20:13
补充一下,不光在breed下更新会出现这样的问题。在固件里面更新固件也会出同样的问题。  详情 回复 发表于 2015-8-16 00:50
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-16 00:50 | 显示全部楼层
ghostja 发表于 2015-8-16 00:26
楼主,有个问题想和你确认一下。

我使用的设备是 磊科 NO1

补充一下,不光在breed下更新会出现这样的问题。在固件里面更新固件也会出同样的问题。

点评

再补充一下,软重启也会出现同样的情况。  详情 回复 发表于 2015-8-16 13:46
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-16 02:07 | 显示全部楼层
hackpascal 发表于 2015-3-21 23:48
当然是在uboot里刷啊
复位键和led不能改
把这些信息回帖,我会出对应复位键的

求大神解决下UBNT刷breed后,网口灯不亮的问题!
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-16 02:07 | 显示全部楼层
跪求大神解决UBNT刷Breed后,网口灯不亮的问题
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-16 09:22 | 显示全部楼层
hackpascal 发表于 2015-6-5 14:31
鉴于你发了这么多次,我决定不做了

我也支持,这人的头像傻-逼,感觉人也是
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-16 09:36 | 显示全部楼层
mark,准备刷机。。。
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-16 13:46 | 显示全部楼层
ghostja 发表于 2015-8-16 00:50
补充一下,不光在breed下更新会出现这样的问题。在固件里面更新固件也会出同样的问题。

再补充一下,软重启也会出现同样的情况。
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-16 15:34 | 显示全部楼层

2041N v1 能否使用941N V6版本软件?

点评

直接用通用版本,就是这个breed-ar9344.bin  详情 回复 发表于 2016-4-19 08:38
使用AR9344标准版即可。不能用941N V6专用的,否则无限进BREED,当然,可以再BREED中再刷标准版就好了。  详情 回复 发表于 2015-11-5 14:57
我的恩山、我的无线 The best wifi forum is right here.
发表于 2015-8-16 15:35 | 显示全部楼层
2041N v1 能否使用941N V6版本软件?
我的恩山、我的无线 The best wifi forum is right here.
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|手机版|小黑屋|Archiver|手机APP版|恩山无线论坛 ( 苏ICP备05084872号-1 )  

GMT+8, 2017-11-24 10:10

Powered by Discuz! X3.3

© 2001-2017 Comsenz Inc.

快速回复 返回顶部 返回列表