找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
楼主: hackpascal

【2022-07-26】AR/QCA/MTK Breed,功能强大的多线程 Bootloader

   火... [复制链接]
发表于 2017-2-6 08:30 | 显示全部楼层
非常好的资源。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2017-2-6 23:32 来自手机 | 显示全部楼层
厉害了。。,
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

头像被屏蔽
发表于 2017-2-7 14:57 | 显示全部楼层
H大人,一直是您uboot breed的忠实用户之一,最近看到您居然出了ar7161的breed,高兴呀;但是碰到了一个问题,希望您百忙之中能给予解决我现在使用的AR7161版本的breed,进入openwrt后网口好用,但是在breed下网口不通,有朋友告诉我说我的网口是eth1不是eth0所以不通,所以请问H大,您是否方便做一个像9344 8035那样能自动侦测的呀,因为我刷过9344的breed,他不管8035是port几,他都能自动侦测出来,我用过好多不同port的9344 8035,breed都是好用的,唯独现在这个7161的碰到了这个breed下网口不通,进入op系统又通了的问题,希望您有空给看看,如何能解决,谢谢


Boot and Recovery Environment for Embedded Devices
Copyright (C) 2017 HackPascal <hackpascal@gmail.com>
Build date 2017-01-16 [git-7e65927]
Version 1.1 (r1008)

DRAM: 128MB
Platform: Atheros AR7161 rev 2
Board: Blank
Clocks: CPU: 680MHz, DDR: 340MHz, AHB: 170MHz, Ref: 40MHz
Environment variables @ 00020000 on flash bank 0, size 00010000
Flash: Spansion S25FL064P (8MB) on ath79-spi.0
ag71xx-eth: MAC address is invalid, using default settings.
ag71xx-eth: Using MAC address 00:13:74:00:00:01
Waiting for auto-negotiation complete ... OK
eth0: Atheros AR8035

Network started on eth0, inet addr 192.168.1.2, netmask 255.255.255.0

Press any key to interrupt autoboot ... 0   

Trying to boot firmware from 0x00030000 in flash bank 0 ...
Reading data into memory ...
U-Boot firmware image header detected.
    Image Name:   MIPS OpenWrt Linux-3.18.45
    Data Size:    1157004 Bytes
    Load Address: 80060000
    Entry Point:  80060000
Uncompressing data (LZMA) ... done.
Flushing cache ... done.

Starting kernel at 0x80060000...

[    0.000000] Linux version 3.18.45 (vmware@vmware) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49389) ) #61 Tue Feb 7 10:20:35 CST 2017
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR7161 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x07ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x07ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x07ffffff]
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  board=AP96 console=ttyS0,115200 mtdparts=spi0.0:128k(u-boot),64k(u-boot-env),1280k(kernel),6656k(rootfs),64k(mac),7936k@0x30000(firmware) rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Writing ErrCtl register=00067850
[    0.000000] Readback ErrCtl register=00067850
[    0.000000] Memory: 125856K/131072K available (2523K kernel code, 143K rwdata, 540K rodata, 240K init, 188K bss, 5216K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:680.000MHz, DDR:340.000MHz, AHB:170.000MHz, Ref:40.000MHz
[    0.000000] Calibrating delay loop... 452.19 BogoMIPS (lpj=2260992)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.070000] NET: Registered protocol family 16
[    0.080000] MIPS: machine is Atheros AP96
[    0.590000] registering PCI controller with io_map_base unset
[    0.600000] PCI host bridge to bus 0000:00
[    0.600000] pci_bus 0000:00: root bus resource [mem 0x10000000-0x16ffffff]
[    0.610000] pci_bus 0000:00: root bus resource [io  0x0000]
[    0.610000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.620000] pci 0000:00:11.0: BAR 0: assigned [mem 0x10000000-0x1000ffff]
[    0.620000] pci 0000:00:12.0: BAR 0: assigned [mem 0x10010000-0x1001ffff]
[    0.630000] pci 0000:00:11.0: using irq 40 for pin 1
[    0.630000] pci 0000:00:12.0: using irq 41 for pin 1
[    0.640000] Switched to clocksource MIPS
[    0.640000] NET: Registered protocol family 2
[    0.650000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.650000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.660000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.660000] TCP: reno registered
[    0.670000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.670000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.680000] NET: Registered protocol family 1
[    0.690000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.700000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.700000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.710000] msgmni has been set to 245
[    0.730000] io scheduler noop registered
[    0.730000] io scheduler deadline registered (default)
[    0.740000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.740000] console [ttyS0] disabled
[    0.770000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 10625000) is a 16550A
[    0.780000] console [ttyS0] enabled
[    0.780000] console [ttyS0] enabled
[    0.780000] bootconsole [early0] disabled
[    0.780000] bootconsole [early0] disabled
[    0.790000] m25p80 spi0.0: found s25sl064p, expected m25p80
[    0.800000] m25p80 spi0.0: s25sl064p (8192 Kbytes)
[    0.800000] 6 cmdlinepart partitions found on MTD device spi0.0
[    0.810000] Creating 6 MTD partitions on "spi0.0":
[    0.820000] 0x000000000000-0x000000020000 : "u-boot"
[    0.820000] 0x000000020000-0x000000030000 : "u-boot-env"
[    0.830000] 0x000000030000-0x000000170000 : "kernel"
[    0.830000] 0x000000170000-0x0000007f0000 : "rootfs"
[    0.840000] mtd: device 3 (rootfs) set to be root filesystem
[    0.840000] 1 squashfs-split partitions found on MTD device rootfs
[    0.850000] 0x0000003b0000-0x0000007f0000 : "rootfs_data"
[    0.860000] 0x0000007f0000-0x000000800000 : "mac"
[    0.860000] 0x000000030000-0x0000007f0000 : "firmware"
[    0.880000] libphy: ag71xx_mdio: probed
[    1.280000] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:05 [uid=004dd072, driver=Atheros 8035 ethernet]
[    1.290000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:RGMII
[    1.290000] TCP: cubic registered
[    1.300000] NET: Registered protocol family 17
[    1.300000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.310000] 8021q: 802.1Q VLAN Support v1.8
[    1.320000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    1.330000] Freeing unused kernel memory: 240K (80384000 - 803c0000)
[    2.240000] init: Console is alive
[    2.250000] init: - watchdog -
[    3.270000] usbcore: registered new interface driver usbfs
[    3.280000] usbcore: registered new interface driver hub
[    3.280000] usbcore: registered new device driver usb
[    3.290000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.300000] ehci-platform: EHCI generic platform driver
[    3.310000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.310000] ohci-platform: OHCI generic platform driver
[    4.260000] init: - preinit -
[    4.700000] random: procd urandom read with 7 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    7.900000] jffs2: notice: (310) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    7.920000] mount_root: switching to jffs2 overlay
[    7.950000] procd: - early -
[    7.960000] procd: - watchdog -
[    8.630000] procd: - ubus -
[    9.660000] procd: - init -
Please press Enter to activate this console.
[   10.320000] NET: Registered protocol family 10
[   10.330000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   10.340000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[   10.350000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[   10.360000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.370000] nf_conntrack version 0.5.0 (1970 buckets, 7880 max)
[   10.410000] xt_time: kernel timezone is -0000
[   10.470000] PPP generic driver version 2.4.2
[   10.480000] NET: Registered protocol family 24
[   10.520000] PCI: Enabling device 0000:00:11.0 (0000 -> 0002)
[   11.330000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb0000000, irq=40
[   11.360000] PCI: Enabling device 0000:00:12.0 (0000 -> 0002)
[   12.170000] ieee80211 phy1: Atheros AR9280 Rev:2 mem=0xb0010000, irq=41
[   19.000000] device eth0 entered promiscuous mode
[   19.000000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   19.400000] ar71xx: pll_reg 0xb8050014: 0x110000
[   19.400000] eth0: link up (1000Mbps/Full duplex)
[   19.500000] br-lan: port 1(eth0) entered forwarding state
[   19.500000] br-lan: port 1(eth0) entered forwarding state
[   19.510000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   20.460000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.480000] device wlan0 entered promiscuous mode
[   20.670000] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[   20.700000] device wlan1 entered promiscuous mode
[   20.700000] br-lan: port 3(wlan1) entered forwarding state
[   20.710000] br-lan: port 3(wlan1) entered forwarding state
[   20.740000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[   21.500000] br-lan: port 1(eth0) entered forwarding state
[   22.710000] br-lan: port 3(wlan1) entered forwarding state
[   47.740000] random: nonblocking pool is initialized
[   80.670000] br-lan: port 2(wlan0) entered forwarding state
[   80.670000] br-lan: port 2(wlan0) entered forwarding state
[   80.680000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   82.670000] br-lan: port 2(wlan0) entered forwarding state



BusyBox v1.23.2 (2017-02-04 20:13:44 CST) built-in shell (ash)

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
CHAOS CALMER (Chaos Calmer, r49389)
-----------------------------------------------------
  * 1 1/2 oz Gin            Shake with a glassful
  * 1/4 oz Triple Sec       of broken ice and pour
  * 3/4 oz Lime Juice       unstrained into a goblet.
  * 1 1/2 oz Orange Juice
  * 1 tsp. Grenadine Syrup
-----------------------------------------------------


点评

breed里面能显示出ar8035说明已经识别了,跟eth0 eth1没有一点关系 网络不通只能说明breed里面设置的rgmii参数跟你固件里的设置不同 现阶段breed里面的这些参数是不能改的,所以没有办法 以后可能会出修改这些参  详情 回复 发表于 2017-2-7 18:53
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2017-2-7 18:35 | 显示全部楼层
感谢大神分享!!!!!!!!!!!!!!!!!!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2017-2-7 18:53 | 显示全部楼层
龙爷无线 发表于 2017-2-7 14:57
H大人,一直是您uboot breed的忠实用户之一,最近看到您居然出了ar7161的breed,高兴呀;但是碰到了一个问题 ...

breed里面能显示出ar8035说明已经识别了,跟eth0 eth1没有一点关系
网络不通只能说明breed里面设置的rgmii参数跟你固件里的设置不同
现阶段breed里面的这些参数是不能改的,所以没有办法
以后可能会出修改这些参数的功能

另外我也不知道你的固件里面设置的参数是什么

点评

9344+8035+9382的ap,误刷了breed-ar9344.bin(应该是ar934x-blank.bin),导致breed webui 出不来、breedenter中断不了启动和putty 下wget 链接失败,好像只能上编程器了。 能不能开发一组breed环境下TTL/UART 命令  详情 回复 发表于 2017-5-1 16:41
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2017-2-7 19:06 | 显示全部楼层
太给力了吧,大神
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2017-2-7 20:07 | 显示全部楼层
本帖最后由 gmfghp 于 2017-2-7 20:31 编辑

rt3352f的CPU  用的 dir524 的breed 识别出来是320mhz的3350f   。没有通用的spi ,,,,刚刚  发现 巴法络的 305x 有 gopi0 按住wps 启动 breed试试 哪个 reset 是缩进壳子里面的wps键在外边 。。。。。可以了按住wps键就行   现在 几乎每次打开电脑上网页的时候都不自主的 打开h大的帖子 看看更新了没有,666  支持支持。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2017-2-7 22:39 | 显示全部楼层
抱歉,请允许我伸手党一回,因为我百度了好久都没有找到,
我在前面看到您说用uboot刷入breed,那么斐讯k2为何不用自带的miniweb server刷breed呢?是不能用miniweb刷吗?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2017-2-9 09:09 | 显示全部楼层
非常好的东西,让K2在全国开了花
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2017-2-9 13:54 | 显示全部楼层
牛掰,膜拜。。。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2017-2-9 22:23 | 显示全部楼层
360 P2  能刷不?
--------------------------------------------------------
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2017-2-9 23:48 | 显示全部楼层
已经收藏了,准备用这个,准备更新到这个版本
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

头像被屏蔽
发表于 2017-2-10 07:11 | 显示全部楼层
hackpascal 发表于 2017-2-7 18:53
breed里面能显示出ar8035说明已经识别了,跟eth0 eth1没有一点关系
网络不通只能说明breed里面设置的rgm ...

这是他启动OP时候正常工作的信息,不知道能看出rgmii配置不,或者如果您有空的话pm我一下地址,我发一台给您,您方便的话给适配一个7161 8035的breed,现在这网口就是不通呀,呵呵只能眼睁睁看着引导,就是进不去web管理,呵呵
[    0.880000] libphy: ag71xx_mdio: probed
[    1.280000] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:05 [uid=004dd072, driver=Atheros 8035 ethernet]
[    1.290000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:RGMII
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

头像被屏蔽
发表于 2017-2-10 07:12 | 显示全部楼层
hackpascal 发表于 2017-2-7 18:53
breed里面能显示出ar8035说明已经识别了,跟eth0 eth1没有一点关系
网络不通只能说明breed里面设置的rgm ...

这是他启动OP时候正常工作的信息,不知道能看出rgmii配置不,或者如果您有空的话pm我一下地址,我发一台给您,您方便的话给适配一个7161 8035的breed,现在这网口就是不通呀,呵呵只能眼睁睁看着引导,就是进不去web管理,呵呵
[    0.880000] libphy: ag71xx_mdio: probed
[    1.280000] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:05 [uid=004dd072, driver=Atheros 8035 ethernet]
[    1.290000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:RGMII

点评

ttl看得出来我还会说我看不出来?  发表于 2017-2-10 12:50
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2017-2-10 10:11 | 显示全部楼层
方便的功能,谢谢提供
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-25 07:10

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表