【2022-07-26】AR/QCA/MTK Breed，功能强大的多线程 Bootloader

小麦兜

路由宝恢复潘多拉固件无限重启

rice_big

我的741N刷了 2015-7-28的breed-ar724x.bin後,發現在breed裡不能刷固件了,也不能刷bootloader,顯示刷成功,但刷完利沒刷一樣.怎麼辦?另外用ttl去刷固件,也是顯示刷成功但事實上什麼也刷不進去

rice_big

flash的起始地址在最新版breed為0x00000,是不是有問題呀?

rice_big

以下是TTL信息:

breed> wget http://192.168.1.2/openwr-ar71xx ... quashfs-factory.bin
wget http://192.168.1.2/openwr-ar71xx ... quashfs-factory.bin
Connecting to 192.168.1.2:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3932160/0x3c0000 (3MB) [application/octet-stream]
Saving to address 0x80000000

[========================================================================] 100%

Transmission completed in 1.4s.

breed> flash bank 0 write 0x20000 0x80000000 0x7e0000
flash bank 0 write 0x20000 0x80000000 0x7e0000
Writing flash bank 0 into 20000h from memory 80000000h, size 7e0000h
[========================================================================] 100%
Succeeded

keecop

为了 进入BREED 界面。之后就没反应。点不动了

sowxf

QCA9533 8M 64M 安装TP和迅捷原厂固件无法启动，机器为迅捷的306

Boot and Recovery Environment for Embedded Devices
Copyright (C) 2015 HackPascal <hackpascal@gmail.com>
Build date 2015-07-28 [git-b305e17]
Version 1.0 (r679)

DRAM: 64MB
Platform: Qualcomm Atheros QCA953X rev 1
Board: Generic board
Clocks: CPU: 550MHz, DDR: 400MHz, AHB: 200MHz, Ref: 25MHz
Flash: Winbond W25Q64 (8MB) on ath79-spi
ag71xx-eth: Using MAC address d0:c7:c0:52:48:fc
eth0: Atheros AR8228/AR8229 rev 1

Network started on eth0, inet addr 192.168.1.1, netmask 255.255.255.0

Press any key to interrupt autoboot ... 0   

Unable to locate firmware.

Starting breed built-in shell

breed>

fj2003

大神，问个小白问题，怎么没有bcm芯片的？还有bcm5358是little endian吗？

fj2003

fj2003 发表于 2015-8-3 16:49
大神，问个小白问题，怎么没有bcm芯片的？还有bcm5358是little endian吗？

大神，bcm5358是big-endian的吧

ALeeNN

Hackpascal, please help me.

I have a alfa n5 ap.

This is a 5 ghz router.

Cpu: ar7240

Reset Button Gpio: 11

I want use airos with alfa n5.
But airos using reset button Gpio: 12

I installed your breed boot and than airos.

It can be perfect. But Reset button can not run.

Please help me.

How I can solve problem.

Have a nice day.

我是菜逼

大神能不能增加TP的WR-2041 V1的专版支持，刷了941 V6的重启只进bread。辛苦了

ALeeNN

ALeeNN 发表于 2015-8-4 12:10
Hackpascal, please help me.

I have a alfa n5 ap.

Ok. Thanks.

I am from foreign country.

And I can not understand your words some times.

If I write things against the rules, please forgive.

I am waiting. Thanks.

rice_big

樓主是不是不會增加1043ND V1的支持?
會不會修復Archer c7/c5 無法使用5G wifi問題?

wangist6

联想Y1S，刷楼主breed 7月28号的，WAN口和2个黑色的lan口都无法使用，试了所有固件都无法使用。breed中灯亮，进入系统那3个灯都不亮。更换以前版本breed也无法使用，2个千兆lan都没问题。更换为官方uboot正常。

ALeeNN

hackpascal 发表于 2015-8-1 21:55
我帖子一楼说了
ubnt那个是给正版ubnt硬件用的，例如Unifi ap，特点是只有一个复位键可以进breed
其它 ...

Hi Hackpascal.

I am waiting for solution.

But I can not see your solution way.

When you will help me?

Have a nice day.

满帅果宝

楼主大神 我的是tp wdr4300 刷了breed后按串口提示按任意键就可以停在uboot，可是不管我怎么按都停不下来，原版的是按tpl我的也停不下来，我用的是breed-ar9344-ar8327n.bin可不可以做一个ar9344 加ar8337n的呢，我自己改的话主要是要修改uboot 哪一部分，忘大神不吝赐教