找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 5094|回复: 2

友华PT923G TTL进入失败 求高手指点

[复制链接]
发表于 2018-1-19 02:54 | 显示全部楼层 |阅读模式
BGA IC
Xtal:1
DDR3 init.
DRAMC init done.
Calculate size.
DRAM size=512MB(supported max size)
Set new TRFC.
ddr-1066

7512DRAMC V1.1.2 (0)


EN751221 at 2017年 09月 01日 星期五 13:15:08 CST version 1.1 free bootbase

Memory size 512MB

Set SPI Clock to 25 Mhz
spi_nand_probe: mfr_id=0xef, dev_id=0xaa
Using Flash ECC.
Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25N01G, Flash Size=0x8000000
bmt pool size: 40
BMT & BBT Init Success

Press any key in 3 secs to enter boot command mode.
............................................................
按任意键停不下来啊。

==> boot flag = 0Decompress to 80002000 free_mem_ptr=80960000 free_mem_ptr_end=80960000
from main
Uncompressing [LZMA] ...  done.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.21 (root@kevin-PowerEdge-R730) (gcc version 4.9.3 (Buildroot 2015.08.1) ) #4 SMP Fri Sep 1 13:17:31 CST 2017
ISPRAM0: PA=00600000,Size=00010000,enabled
memsize:440MB
EcoNet EN751221 SOC prom init
bootconsole [early0] enabled
CPU0 revision is: 00019558 (MIPS 34Kc)
Determined physical RAM map:
memory: 1b7fe000 @ 00002000 (usable)
Wasting 64 bytes for tracking 2 unused pages
Zone ranges:
  Normal   [mem 0x00002000-0x1b7fffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00002000-0x1b7fffff]
Initmem setup node 0 [mem 0x00002000-0x1b7fffff]
Detected 1 available secondary CPU(s)
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
PERCPU: Embedded 9 pages/cpu @81374000 s5760 r8192 d22912 u36864
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 111758
Kernel command line:  es=1
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Writing ErrCtl register=0007c003
Readback ErrCtl register=0007c003
nmi base is 813f4200
allocated 901104 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 437404K/450552K available (6200K kernel code, 338K rwdata, 1180K rodata, 200K init, 311K bss, 13148K reserved)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:64

tc3162_time_init: Init bus timeout and watchdog
plat_set_irq_affinity: cpu 0
plat_set_irq_affinity: cpu 0 vpe_id 0
plat_set_irq_affinity: irq_vpe0 1 irq_vpe1 0, irq = 10
plat_set_irq_affinity: irq num 10
plat_set_irq_affinity: cpu 0
plat_set_irq_affinity: cpu 0 vpe_id 0
plat_set_irq_affinity: irq_vpe0 1 irq_vpe1 0, irq = 33
plat_set_irq_affinity: irq num 33
CPU frequency 900.00 MHz
plat_time_init: Entered, mips_timer_ack ptr is [80006ef4]
Using 200.000 MHz high precision timer.
r4k_clockevent_init: setup_irq OK, irq is [31]
console [ttyS0] enabled
console [ttyS0] enabled
bootconsole [early0] disabled
bootconsole [early0] disabled
Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys debug
34K sync es set to 1.
Config7: 0x80080500
ISPRAM0: PA=00600000,Size=00010000,enabled
Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
CPU1 revision is: 00019558 (MIPS 34Kc)
Synchronize counters for CPU 1: done.
Brought up 2 CPUs
NET: Registered protocol family 16
MT7512_pcie_init
check pcie link up status:
isRC0_LINKUP=1
isRC1_LINKUP=1
registering PCI controller with io_map_base unset
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
pci_bus 0000:00: root bus resource [io  0x1f600000-0x1f61ffff]
pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
pci 0000:00:01.0: BAR 8: assigned [mem 0x20100000-0x202fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [mem 0x20000000-0x200fffff]
pci 0000:02:00.0: BAR 0: assigned [mem 0x20100000-0x201fffff 64bit]
pci 0000:02:00.0: BAR 6: assigned [mem 0x20200000-0x2020ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 02]
pci 0000:00:01.0:   bridge window [mem 0x20100000-0x202fffff]
NET: Registered protocol family 8
NET: Registered protocol family 20
Switched to clocksource MIPS
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1

mt7512_pcie_fixup: 0x1438 = 20000014
mt7512_pcie_fixup: 0x3438 = 20100015
mt7512_pcie_rc1_retrain: 70 = 0047dc11 80 = 01608c12
TC3162 hardware watchdog module loaded.
futex hash table entries: 512 (order: 2, 16384 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ntfs: driver 2.1.31 [Flags: R/W DEBUG].
msgmni has been set to 854
io scheduler noop registered (default)
ttyS0 at I/O 0xbfbf0003 (irq = 1, base_baud = 7200) is a TC3162
ECNT ring buffer init success
brd: module loaded

SPI Flash Init Start
Found no SPI flash device
IS_SPIFLASH=0x0, IS_NANDFLASH=0x2, (0xBFA10114)=0x6)
Set SPI Clock to 25 Mhz
SPI_NAND_Flash_init: before init, mtx_mode_tog=0xl9, manaul_en=0x1
spi_nand_probe: mfr_id=0xef, dev_id=0xaa
Detected SPI NAND Flash : _SPI_NAND_DEVICE_ID_W25N01G, Flash Size=0x8000000
spi nand flash
tc3162: flash device 0x01000000 at 0x1c000000
EN7512 mtd init: spi nand probe enter
[spi_nand_setup] : Enter
nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
nand: Unknown _SPI_NAND_DEVICE_ID_W25N01G
nand: 128MiB, SLC, page size: 2048, OOB size: 64
nand_scan_ident ok
[spi_nand_setup]: chip size =  0x8000000, erase_shift=0x11
calc_bmt_pool_size : need_valid_block_num=0x28, total_block=0x400
bmt pool size: 40
BMT & BBT Init Success

parsing <0[bootloader],0[romfile],18m[tclinux],18m[tclinux_slave],8m[opt0],8m[opt1],62m[ubifs],3840k[other]>
partition 11: name <other>, offset ffffffff, size 3c0000, mask flags 0
partition 10: name <ubifs>, offset ffffffff, size 3e00000, mask flags 0
partition 9: name <opt1>, offset ffffffff, size 800000, mask flags 0
partition 8: name <opt0>, offset ffffffff, size 800000, mask flags 0
partition 7: name <tclinux_slave>, offset ffffffff, size 1200000, mask flags 0
partition 4: name <tclinux>, offset ffffffff, size 1200000, mask flags 0
partition 1: name <romfile>, offset ffffffff, size fffffffe, mask flags 0
partition 0: name <bootloader>, offset ffffffff, size fffffffe, mask flags 0
Creating 13 MTD partitions on "EN7512-SPI_NAND":
0x000000000000-0x000000040000 : "bootloader"
0x000000040000-0x000000080000 : "romfile"
0x000000080000-0x0000003291ae : "kernel"
mtd: partition "kernel" doesn't end on an erase block -- force read-only
0x0000003291ae-0x0000010991ae : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x000000080000-0x000001280000 : "tclinux"
0x000001280000-0x0000015291ae : "kernel_slave"
mtd: partition "kernel_slave" doesn't end on an erase block -- force read-only
0x0000015291ae-0x0000022991ae : "rootfs_slave"
mtd: partition "rootfs_slave" doesn't start on an erase block boundary -- force read-only
0x000001280000-0x000002480000 : "tclinux_slave"
0x000002480000-0x000002c80000 : "opt0"
0x000002c80000-0x000003480000 : "opt1"
0x000003480000-0x000007280000 : "ubifs"
0x000007280000-0x000007640000 : "other"
0x000007640000-0x000007800000 : "reservearea"

rootfs
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
p p t p driver version 0.8.5
register rtpci
PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
PCI: Enabling device 0000:02:00.0 (0000 -> 0002)


=== pAd = c0181000, size = 1229936 ===

<-- RTMPAllocTxRxRingMemory, Status=0
<-- RTMPAllocAdapterBlock, Status=0
pAd->CSRBaseAddress =0xc0080000, csr_addr=0xc0080000!
device_id =0x7662
==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai
*****run project phy.
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 156(0x0000009C)
FM detection done! loop = 1
SR calibration value u1SrCalVal = 5
FM_OUT value: u4FmOut = 153(0x00000099)
FM detection done! loop = 0
SR calibration value u1SrCalVal = 5
xhci-hcd xhci-hcd: xHCI Host Controller
xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 1
plat_set_irq_affinity: cpu 0
plat_set_irq_affinity: cpu 0 vpe_id 0
plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 1 irq_vpe1 1, irq = 18
plat_set_irq_affinity: irq num 18
xhci-hcd xhci-hcd: irq 18, io mem 0x1fb90000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci-hcd xhci-hcd: xHCI Host Controller
xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
USB PHY config 1
port 0 u2_slew_rate_calibration
FM_OUT value = 157(0x0000009D)
SR calibration value = 4
port 1 u2_slew_rate_calibration
FM_OUT value = 153(0x00000099)
SR calibration value = 4
USB driver version: 751221.2.20160516
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver ch341
usbserial: USB Serial support registered for ch341-uart
usbcore: registered new interface driver cp210x
usbserial: USB Serial support registered for cp210x
usbcore: registered new interface driver cypress_m8
usbserial: USB Serial support registered for DeLorme Earthmate USB
usbserial: USB Serial support registered for HID->COM RS232 Adapter
usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (6834 buckets, 27336 max)
ctnetlink v0.93: registering with nfnetlink.
nf_conntrack_rtsp v0.7 loading
nf_nat_rtsp v0.7 loading
nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
nf_tables_compat: (c) 2012 Pablo Neira Ayuso <pablo@netfilter.org>
gre: GRE over IPv4 demultiplexor driver
ip_gre: GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
TCP: cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
8021q: 802.1Q VLAN Support v1.8
plat_set_irq_affinity: cpu 0
plat_set_irq_affinity: cpu 0 vpe_id 0
plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 1 irq_vpe1 1, irq = 1
plat_set_irq_affinity: irq num 1
tc3162ser_startup
VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
Freeing unused kernel memory: 200K (8078e000 - 807c0000)
bu

mipsmt_sys_sched_setaffinity new_mask origin value is 00000002



mipsmt_sys_sched_setaffinity new_mask changed value is 00000001

sybox init and set aff
plat_set_irq_affinity: cpu 0
plat_set_irq_affinity: cpu 0 vpe_id 0
plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 1 irq_vpe1 1, irq = 1
plat_set_irq_affinity: irq num 1
tc3162ser_startup
plat_set_irq_affinity: cpu 0
plat_set_irq_affinity: cpu 0 vpe_id 0
plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 1 irq_vpe1 1, irq = 1
plat_set_irq_affinity: irq num 1
tc3162ser_startup
init started:  BusyBox v1.00 (2017.09.01-05:24+0000) multi-call binary
plat_set_irq_affinity: cpu 0
plat_set_irq_affinity: cpu 0 vpe_id 0
plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 1 irq_vpe1 1, irq = 1
plat_set_irq_affinity: irq num 1
tc3162ser_startup
chmod: /userfs/profile.cfg: Read-only file system
efi_mod: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
Unlocking bootloader ...
set write on 0 to bootloader
regUsr2 sig 17
joyem2 don't create osgi
Ebtables v2.0 registered
main, 13:40:05 enter, zip frequece 60 secs!
mtd[readflash]:device=reservearea tclen=2280 tcoffset=786432
Unlocking reservearea ...
Reading from reservearea to /tmp/prolinecwmppararead ...

00000000h: 00 00 01 3B 00 00 04 97 00 00 00 00 00 00 01 B2
00000010h: 00 00 00 0B 00 00 00 0E 00 00 0F 30 00 00 00 1E
00000020h: 00 00 00 26 00 00 00 19 00 00 00 00 00 00 00 02
00000030h: 01 2D 01 77 01 C2 02 0C FF FF FF FF FF FF FF FF
00000040h: 00 93 01 13 FF FF FF FF FF FF FF FF FF FF FF FF
00000050h: 27 10 54 00 03 E8 0A D0 00 64 01 84 FF FF FF F1
00000060h: 00 00 00 FA FF FF FF FF FF FF FF FF FF FF FF FF
00000070h: 80 00 00 00 FF FF FF FF FF FF FF FF 00 00 00 03
00000080h: FF FF FF FF 00 4D FF FF FF FF FF FF FF FF FF FF
00000090h: FF FF FF FF 07 05 07 00 00 0MAXNET DPI interface Loaded
0 00 BA 00 50 00 57
000000a0h: FF FF FF FF FF FF FF FF FF FF FF FF 00 E2 FF FF
000000b0h: 00 EC FF FF 01 01 FF FF 01 24 FF FF 01 5A FF FF
000000c0h: 01 A7 FF FF 02 10 FF FF 02 EB FF FF 03 EB FF FF
000000d0h: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
000000e0h: 007512 chip select
cat: /proc/tc3162/sys_chip_type: No such file or directory

error chip id

BusyBox v1.00 (2017.09.01-05:24+0000) multi-call binary

Usage: cp [OPTION]... SOURCE DEST

vtag_drv_init

tcsmux version: 20160424

tcportbind version: 20160424
TCSUPPORT_IPV6
TCSUPPORT_USBHOST
SCSI subsystem initialized
usbcore: registered new interface driver usb-storage
fuse init (API version 7.23)

tcaccesslimit version: 20160424

url_filter_init
TC3162 LED Manager 0.1 init

tcledctrl version: 20160424
led path:/userfs/led.conf

tcci version: 20160424

SIFMaster 0.1 init

Register sifm cmd
UBI: attaching mtd10 to ubi0
UBI: scanning is finished
UBI: attached mtd10 (name "ubifs", size 62 MiB) to ubi0
UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
UBI: good PEBs: 496, bad PEBs: 0, corrupted PEBs: 0
UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
UBI: max/mean erase counter: 12/7, WL threshold: 4096, image sequence number: 1164761964
UBI: available PEBs: 0, total reserved PEBs: 496, PEBs reserved for bad PEB handling: 2
UBI: background thread "ubi_bgt0d" started, PID 196
UBI device number 0, total 496 LEBs (62980096 bytes, 60.1 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
UBIFS: background thread "ubifs_bgt0_0" started, PID 198
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "ubifs0"
UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS: FS size: 60948480 bytes (58 MiB, 480 LEBs), journal size 3047424 bytes (2 MiB, 24 LEBs)
UBIFS: reserved for root: 2878747 bytes (2811 KiB)
UBIFS: media format: w4/r0 (latest is w4/r0), UUID 49CFEF9D-F3C0-4A77-8EDB-701FE05E3406, small LPT model
mount: Mounting ns on /sys/fs/cgroup/ns failed: No such file or directory
insmod ETH_LAN driver
macType = 0
qdma_lan: physical_size is 0x00200000
plat_set_irq_affinity: cpu 0
plat_set_irq_affinity: cpu 0 vpe_id 0
plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 1 irq_vpe1 1, irq = 22
plat_set_irq_affinity: irq num 22
ether.c:v1.00-NAPI 29.Mar.2015
netif_napi_add() called with weight 256 on device eth0
eth0: FE MAC Ethernet address: 04:E0:B0:E8:58:80
User External switch ,type 10
sched: RT throttling activated
tcPhyVerLookUp 3942 9412
7530 Ge, 0x1
MCM MT7530
[tcPhyInit] in  [tcPhyInit] out , r31 = (0, 0x0)
tcPhyVerLookUp 3942 9412
7530 Ge, 0x1
MCM MT7530
[tcPhyInit] in  [tcPhyInit] out , r31 = (1, 0x0)
tcPhyVerLookUp 3942 9412
7530 Ge, 0x1
MCM MT7530
[tcPhyInit] in  [tcPhyInit] out , r31 = (2, 0x0)
tcPhyVerLookUp 3942 9412
7530 Ge, 0x1
MCM MT7530
[tcPhyInit] in  [tcPhyInit] out , r31 = (3, 0x0)
tcPhyVerLookUp 3942 9412
7530 Ge, 0x1
MCM MT7530
[tcPhyInit] in  [tcPhyInit] out , r31 = (4, 0x0)
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 9451
7512 Ge,
MCM MT7530
[tcPhyInit] in  [tcPhyInit] out , r31 = (12, 0x0)
tcPhyVerLookUp 3942 9451
7512 Ge,
MCM MT7530
[tcPhyInit] in  [tcPhyInit] out , r31 = (12, 0x0)
GE Rxet cal (1)(0)(0)(0x21)
GE Rxet cal (2)(0)(0)(0x22)
  GE Rext AnaCal Done! (3)(0x23)
  GE Rext AnaCal Done! (3)(0x23)
  GE R50 AnaCal Done! (4) (0x25)(0xa5)
  GE R50 AnaCal Done! (4) (0x25)(0xa5)
  GE R50 AnaCal Done! (5) (0x24)(0xa4)
  GE R50 AnaCal Done! (5) (0x24)(0xa4)
GE Tx offset AnaCal Done! (4)(0x24)
GE Tx offset AnaCal Done! (1)(0x1)
GE Tx offset AnaCal Done! (1)(0x21)
GE Tx offset AnaCal Done! (4)(0x4)
GE Tx amp AnaCal Done! (pair-0)(0x12)(0x1820)
GE Tx amp AnaCal Done! (28) (0x4)
GE Tx amp AnaCal Done! (pair-1)(0x17)(0x620)
GE Tx amp AnaCal Done! (28) (0x4)
GE Tx amp AnaCal Done! (pair-2)(0x19)(0x920)
GE Tx amp AnaCal Done! (25) (0x7)
GE Tx amp AnaCal Done! (pair-3)(0x21)(0x520)
GE Tx amp AnaCal Done! (29) (0x3)
tcPhyVerLookUp 3942 9412
7530 Ge, 0x1
MCM MT7530
tcPhyVerLookUp 3942 9412
7530 Ge, 0x1
MCM MT7530
tcPhyVerLookUp 3942 9412
7530 Ge, 0x1
MCM MT7530
tcPhyVerLookUp 3942 9412
7530 Ge, 0x1
MCM MT7530
tcPhyVerLookUp 3942 9412
7530 Ge, 0x1
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 0
MCM MT7530
tcPhyVerLookUp 3942 9451
7512 Ge,
MCM MT7530
Exec. Successful
Exec. Successful
Exec. Successful
7530 set 5R

____________________________[main:2193]______________________________
the number of cfg node is 115
lightbox_port_control-MT75xx.c, led_portRegister, 88, 13:22:09: enter.
Lightbox, debug:register with led manager
cwmpRoute_init autopvc_init
incommingFilter_init, 2499, ret 0.
pc Compile Time: Sep  1 2017 13:22:02
unused fd 6
unused fd 7
[main:264]max fd is 6
Set coredump file size to 2147483647, path = /opt/upt/apps/youhua/coredump

send2CfgManager: call connect error

send2CfgManager: call connect error
ntpServiceInterfaceUp: get NTPServerType error!
ctromfile.cfg
mtd[readflash]:device=reservearea tclen=2280 tcoffset=786432
Unlocki
[getDefaultRomfile]para.magic=305414945 para.flag=1673397311
ng reservearea ...
Reading from reservearea to /tmp/productlinecwmpfile ...
ctromfile.cfg
verify_romfile func: None AttachWanDNSTunnel node, will get it from default romfile
verifyverify_romfile func: None AttachWanDNSTunnel node from default romfile
_romfile fverify_romfile func: None DnsSpeedLimit node, will get it from default romfile
unc: Nverify_romfile func: None DnsSpeedLimit node from default romfile
one Averify_romfile func: None MaxBandWidth node, will get it from default romfile
ttachWaverify_romfile func: None MaxBandWidth node from default romfile
nDNSTunnel verify_romfile func: None Mirror node, will get it from default romfile
node,verify_romfile func: None Mirror node from default romfile
will gverify_romfile func: None startUpTimeCheat node, will get it from default romfile
et it fverify_romfile func: None startUpTimeCheat node from default romfile
rom default romfile
verify_romfile func: None AttachWanDNSTunnelsslca_verify!
node from default romfile
verify_romfile func: None DnsSpeedLimit node, will get it from default romfile
verify_romfile func: None DnsSpeedLimit node from default romfile
verify_romfile func: None MaxBandWidth node, will get it from default romfile
verify_romfile func: None MaxBandWidth node from default romfile
verify_romfile func: None Mirror node, will get it from default romfile
verify_romfile func: None Mirror node from default romfile
verify_romfile func: None startUpTimeCheat node, will get it from default romfile
verify_romfile func: None startUpTimeCheat node from default romfile
Check romfile pass!
Unlocking reservearea ...
Erase one sector from 0x0 of reservearea ...
tcoffset:0x0,mtdInfo.size:0x1c0000 size-1:1ffff
enter real action ----- tcoffset:0x0                                                                                                                                 [e]mtd[writeflash]:device=reservearea tclen=262144 tcoffset=0 tcfilelen =0
Unlocking reservearea ...
Writing from /dev/mtdblock1 to reservearea ...
enter real action -----tclen:0x40000,tcoffset:0x0
writeflash: write 0 'st sector,start from 0x0,0x20000 bytes                                                                                                          [w]Initializing signal_handler
voip Compile Time: Sep  1 2017 13:22:00
Jan  1 00:00:12 Mgmt:

[start_socket:79] Warning, linux socket SO_RCVBUF maybe overflow!!!!!!
                please set /proc/sys/net/core/rmem_max.



Jan  1 00:00:12 Mgmt: [start_socket:81] expected value(512K), actual value(368K)

enter real action -----tclen:0x20000,tcoffset:0x20000
writeflash: write 1 'st sector,start from 0x20000,0x20000 bytes                                                                                                     writeflash: total write 0x40000 bytes

yaffs: dev is 32505867 name is "mtdblock11" rw
yaffs: passed flags ""

send2CfgManager: call connect error

send2CfgManager: call connect error
ntpServiceInterfaceUp: get NTPServerType error!
init_all_entitys, 388, install 2 entities.

before init ua event

before init diagnostics

provision_init success
iptables_init:OK
voice_app is not  ready OK !!
Jan  1 00:00:12 configfd:

[start_socket:79] Warning, linux socket SO_RCVBUF maybe overflow!!!!!!
                please set /proc/sys/net/core/rmem_max.



Jan  1 00:00:12 configfd: [start_socket:81] expected value(512K), actual value(368K)

main.c: signal, SIGTERM 15, SIGINT 2, SIGCHLD 18.
main.c,main: entering while loop
dhcp6sCall_write:mode[0]=0
WPSOOBActive = NULL
ReCounterActive = NULL
WPSGenPinCode = NULL
xyyou:isfirstwrite...offset=180040
mtd[readflash]:device=reservearea tclen=512 tcoffset=1572928
Unlocking reservearea ...
Reading from reservearea to /tmp/MT7610EEPROM.bin ...
xyyou:the tmp/bin is not empty!!!
xyyou:id in the bin=6276
sslca_write:get Frag Number failed!
[TTT_TTT]virtual**_l2tp_write,8385

lanHost_read: Create node LanHost !
Cannot find device "br0"
The attribute is not in wifiMACTab

dynCwmpAttr_read: Get CurIFIndex fail!
invalid param, pvcNum is -1, entryNum is -1
exec_service_init init ok
setWebInitInfo: ct com
setWebInitInfo: ct com
setWebInitInfo: ct com
eth0: starting interface.
netif_start_queue
macType = 0
qdma_wan: qdma_bmgr.c [2679]: HW_FWD physical size is not illegal, force setting to 4MB
qdma_wan: physical_size is 0x00400000
plat_set_irq_affinity: cpu 0
plat_set_irq_affinity: cpu 0 vpe_id 0
plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 1 irq_vpe1 1, irq = 23
plat_set_irq_affinity: irq num 23
Exec. Successful
Exec. Successful
Exec. Successful
EN7570 found!
FLASH matrix got
TIAGAIN set 0x0
ERC filter set
MPD Current Offset = 0xe2
RSSI_Vref = 0x219
RSSI_V = 0x297
Start GPON Tx Calibration
Rx LOS is set
CDR disabled
T0/T1 delay = 0xba
RGS_T0C = 0x57
RGS_T1C = 0x50
CDR enabled
TGEN done
Initial bias/mod current loaded from FLASH
MPDL/MPDH loaded
Tx SD set
APD initialization done
Switch to Single-closed Loop Mode
Rogue ONU clear
Internal DDMI Enabled
TEC Enabled
Bias offset = 0xfffffffc
ETC = 3
BiasTracking Enabled
EN7570 Initialization Done!
PON PHY driver version is 170228.105.107
xPON driver initialization
Alloc data struct memory successful, 35296
plat_set_irq_affinity: cpu 0
plat_set_irq_affinity: cpu 0 vpe_id 0
plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 1 irq_vpe1 1, irq = 19
plat_set_irq_affinity: irq num 19
XPON Mapping Module init OK!

qos_discipline_init
random: nonblocking pool is initialized
TCSUPPORT_WLAN
TCSUPPORT_DUAL_WLAN_MT7612E
TCSUPPORT_WLAN_MT7592
register mt_drv
PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
PCI: Enabling device 0000:01:00.0 (0000 -> 0002)


=== pAd = c1101000, size = 621824 ===

<-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
<-- RTMPAllocAdapterBlock, Status=0
pAd->CSRBaseAddress =0xc1000000, csr_addr=0xc1000000!
device_id =0x7603
RtmpChipOpsHook(507): Not support for HIF_MT yet!
mt7603_init()-->
mt_bcn_buf_init(224): Not support for HIF_MT yet!
<--mt7603_init()
SIOCGIFFLAGS: No such device
HWNAT Module enabled with Type2B/IPv4/IPv6/DS-LITE/6RD, foeSzie:80B, foeNum:16384
IP check use Black List

49154/ + (null)t, get dev = pon
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
pe=4, inf_Type=5
NVM is BIN mode
1. Phy Mode = 49
get_chl_grp:illegal channel (167)
get_chl_grp:illegal channel (167)
get_chl_grp:illegal channel (169)
get_chl_grp:illegal channel (169)
get_chl_grp:illegal channel (171)
get_chl_grp:illegal channel (171)
drivers/net/wireless/MT7612E/os/linux/../../chips/mt76x2.c:2844 assert (ad->TxPower[choffset].Channel == 42)failed
Country Region from e2p = ffff
mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0
mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=1, ePA_type=1
mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=15, low_temp_slope=9
mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0
mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=-1, tc_upper_bound=1
mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0
mt76x2_get_external_lna_gain:NA type=0x1, BLNAGain=0xffffff88, ALNAGain0=0xffffff8b, ALNAGain1=0xffffff88, ALNAGain2=0xffffff8a
2. Phy Mode = 49
3. Phy Mode = 49
andes_pci_fw_init
0x1300 = 00073200
AntCfgInit: primary/secondary ant 0/1
andes_load_cr:cr_type(2)
ChipStructAssign(): MT76x2 hook !
RTMPSetPhyMode: channel is out of range, use first channel=0
MCS Set = ff ff 00 00 01
[PMF]APStartUp:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
[PMF]APStartUp:: apidx=1, MFPC=0, MFPR=0, SHA256=0
[PMF]APStartUp:: apidx=2, MFPC=0, MFPR=0, SHA256=0
[PMF]APStartUp:: apidx=3, MFPC=0, MFPR=0, SHA256=0
mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=36, HT-CentCh=38, VHT-CentCh=42
APStartUp(): AP Set CentralFreq at 42(Prim=36, HT-CentCh=38, VHT-CentCh=42, BBP_BW=2)
mt76x2_calibration(channel = 42)
The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
@@@ ed_monitor_exit : ===>
@@@ ed_monitor_exit : <===
Main bssid = 04:e0:b0:e8:58:81
mt76x2_reinit_agc_gainriginal agc_vga0 = 0x4a, agc_vga1 = 0x4a
mt76x2_reinit_agc_gain:updated agc_vga0 = 0x4a, agc_vga1 = 0x4a
mt76x2_reinit_hi_lna_gainriginal hi_lna0 = 0x32, hi_lna1 = 0x32
mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x32, hi_lna1 = 0x32
original vga value(chain0) = 4a
original vga value(chain1) = 4a
<==== rt28xx_init, Status=0
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=rai
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi
get_dev_name_prefix(): dev_idx = 0, dev_name_prefix=wdsi
RTMPDrvOpen(1):Check if PDMA is idle!
RTMPDrvOpen(2):Check if PDMA is idle!
jiffies=ffff937a, POLLING_MODE_DETECT_INTV=300
device rai0 entered promiscuous mode
updateDevBandWidthMac:index=0,04:e0:b0:e8:58:81
updateDevBandWidthMac:index=0,04:e0:b0:e8:58:81
TCSUPPORT_WLAN_WDS
There are some error when CPE getting data from EEPROMInterface doesn't accept private ioctl...
stat (8BE9): Network is down
WPSActiveStatus = NULL
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
There are some error when CPE getting data from EEPROMInterface doesn't accept private ioctl...
stat (8BE9): Network is down
WPSOOBActive = NULL
There are some error when CPE getting data from EEPROMInterface doesn't accept private ioctl...
stat (8BE9): Network is down
WPSGenPinCode = NULL
tcapi_save: tid[567], taskName[net_service_hel], callerAddr[0x00423250]
Interface doesn't accept private ioctl...
set (8BE2): Network is down

Send OAM Update config!
!sendEponOamCmdMsg open message queue fail!
Interface doesn't accept private ioctl...
set (8BE2): Network is down
ftp switch turn on
sip switch turn off
TCSUPPORT_CT_NETWORKMANAGESERVICE:no need to start utelnetd up in rcs!
Interface doesn't accept private ioctl...
set (8BE2): Network is down
Interface doesn't accept private ioctl...
set (8BE2): Network is down



mipsmt_sys_sched_setaffinity new_mask origin value is 00000008



mipsmt_sys_sched_setaffinity new_mask changed value is 00000002

h323 switch turn on
TC3162 hardware watchdog initialized
Interface doesn't accept private ioctl...
set (8BE2): Network is down
rtsp switch turn on
TCSUPPORT_CT_NETWORKMANAGESERVICE:no need to use inetd!
TCSUPPORT_CT:no need to use tftpd!
l2tp switch turn on,sw_state=
Set coredump file size to 2147483647, path = /tmp/coredump
iptables: Bad rule (does a matching rule exist in that chain?).
[01/Jan/1970:00:00:23 +0000] boa: server version Boa/0.94.13
[01/Jan/1970:00:00:23 +0000] boa: server built Sep  1 2017 at 13:29:57.
[01/Jan/1970:00:00:23 +0000] boa: starting server pid=641, port 8080
ctromfile.cfg
ipsec switch turn on,sw_state=
iptables: Bad rule (does a matching rule exist in that chain?).
p p t p switch turn on
ctromfile.cfg
[saveFlashProcFun] saveFile /tmp/tcapi_save_req_tmp_file_0
NSH_service_QoS_init
XXXXXXXXXXXXXXXX_111111NSH_service_QoS_init

save_restore_status mode:0
mtd[readflash]:device=reservearea tclen=512 tcoffset=1310720
Unlocking reservearea ...
Reading from reservearea to /tmp/RT30xxEEPROM.bin ...
Unlocking romfile ...
Writing from /tmp/tcapi_save_req_tmp_file_0 to romfile ...
not Error writing tclinux,mtd=romfile.

received the signo:18
br0: port 1(rai0) entered forwarding state
br0: port 1(rai0) entered forwarding state
br0: port 5(eth0.4) entered forwarding state
br0: port 5(eth0.4) entered forwarding state
br0: port 4(eth0.3) entered forwarding state
br0: port 4(eth0.3) entered forwarding state
br0: port 3(eth0.2) entered forwarding state
br0: port 3(eth0.2) entered forwarding state
br0: port 2(eth0.1) entered forwarding state
br0: port 2(eth0.1) entered forwarding state
Unlocking reservearea ...
Erase one sector from 0x0 of reservearea ...
tcoffset:0x0,mtdInfo.size:0x1c0000 size-1:1ffff
enter real action ----- tcoffset:0x0                                                                                                                                 [e]SIOCSIFADDR: File exists
mtd[writeflash]:device=reservearea tclen=262144 tcoffset=0 tcfilelen =13825
Unlocking reservearea ...
Writing from /tmp/tcapi_save_req_tmp_file_0 to reservearea ...
enter real action -----tclen:0x40000,tcoffset:0x0
writeflash: write 0 'st sector,start from 0x0,0x20000 bytes                                                                                                          [w]enter real action -----tclen:0x20000,tcoffset:0x20000
writeflash: write 1 'st sector,start from 0x20000,0x20000 bytes
read:count <= 0                                                                                                                                                     writeflash: total write 0x3601 bytes

del_igmp_mld_proxy: if name is [nas0_0]
portbind_ioctl: PORTBIND_IOC_FULL_ROUTE_DISABLE
Sorry, rule does not exist.
rmmod: /lib/modules/3.18.21/kernel/net/ipv6/netfilter/ip6_tables.ko: No such file or directory
rmmod: /lib/modules/3.18.21/kernel/net/ipv6/netfilter/ip6table_mangle.ko: No such file or directory
NSH_main recv msg:dst_srv nsh_srv_portbind, msg_type 395
NSH_work_routine handle: dst_srv nsh_srv_portbind, msg_type 395
start_interface:start_pvc=1 , g_pvc_refcnt[pvc_index]=0
NSH_main recv msg:dst_srv NSH_MAIN, msg_type 3
NSH_work_routine handle: dst_srv NSH_MAIN, msg_type 3
udhcpc (v0.9.9-pre) started
Jan  1 00:00:25 TCSysLog udhcpc[815]: udhcpc (v0.9.9-pre) started
/bin/sh: tc: not found
method = HW_NAT_TAB_CLEAN
/bin/sh: tc: not found
done
isPPPParaList:tmp=0
portbind_ioctl: PORTBIND_IOC_FULL_ROUTE_DISABLE
Sorry, rule does not exist.
NSH_main recv msg:dst_srv nsh_srv_portbind, msg_type 395
start_interface:start_pvc=1 , g_pvc_refcnt[pvc_index]=0
NSH_main recv msg:dst_srv NSH_MAIN, msg_type 3
iptables v1.4.10: option `--set-mss' requires an argument
Try `iptables -h' or 'iptables --help' for more information.
Plugin pppoe loaded.
PPPoE Plugin Initialized
Plugin pppoe called.
/bin/sh: tc: not found
method = HW_NAT_TAB_CLEAN
done
/bin/sh: tc: not found
isPPPParaList:tmp=2
wan_execute:verify Wan_PVC2 failed
wan_execute:verify Wan_PVC3 failed
wan_execute:verify Wan_PVC4 failed
wan_execute:verify Wan_PVC5 failed
wan_execute:verify Wan_PVC6 failed
wan_execute:verify Wan_PVC7 failed
00:00:26 imgr.c [71]: Initial system driver.
00:00:26 imgr.c [77]: Initial pthread parameters.
00:00:26 imgr.c [83]: Initial dispatcher.
00:00:26 dspch_init.c [23]: Create IPC trap message queue
00:00:26 dspch_init.c [36]: Create IPC trap message queue
00:00:26 imgr.c [89]: Initial database manager.
00:00:26 dbmgr_init.c [32]: Create database memory.
00:00:26 dbmgr_init.c [38]: Create the share database memory successful.
00:00:26 dbmgr_init.c [41]: The total share database size is 0.
00:00:26 imgr.c [95]: Initial config manager.
00:00:26 imgr.c [101]: Initial fault manager.
00:00:26 imgr.c [107]: Initial performance manager.
sh: cannot create /proc/tc3162/eth_ports: Directory nonexistent
iptables: Chain already exists.
radvd starting
Radvd function activated!
Modehcp6s mode is not manual!
killall: udhcpd: no process killed
sh: /userfs/bin/dproxy: not found
NSH_main recv msg:dst_srv nsh_service_wlan, msg_type 253
read WLAN driver from rt_device failed,set with default value!
NSH_main recv msg:dst_srv nsh_service_wlan, msg_type 250
valid subcommands:
adsl

Enter cwmp boot, we will start tr69 Process

Certificate file isn't exist!
thread_monitor  Enter!
fork() error.errno:0 error:Success
Initializing UPnP Sdk with
        ipaddress = {NULL} port = 0



device registration webpage UNLOCKED!


UPnP Initialized
        ipaddress = 192.168.1.1 port = 49152
Control Point Registered:ctrlpt_handle=1
NSH_main recv msg:dst_srv nsh_srv_dnsmasq_name, msg_type 270
Jan  1 00:00:27[TTT_TTT]VpVoipSettingsBegin :3936
Mgmt: logic_msg_handle, 246: io_reboot

/bin/sh: cannot create /var/syslog/reboot.flag: Directory nonexistent

init_upnp_msgq[vpapi_Voip_SetCfg]key=SIPProtocol, value=SIP
():[vpapi_Voip_SetCfg]Can't Match the key:SIPProtocol
Open file ok!
msg_handle 1229 msg->msg_type:9
Start: name = init_sip, pid = voiceapp-pid
close fd 6
fork
pid is 1024
pid is 0
exec /userfs/etc/init_sip  (1024)
[vpapi_Voip_SetCfg]key=SIPTransportProtocol, value=UDP
[vpapi_Voip_SetCfg]Can't Match the key:SIPTransportProtocol
[vpapi_Voip_SetCfg]key=RegistrarServer, value=
[vpapi_Voip_SetCfg]key=RegistrarServerPort, value=5060
VpVoipbasicInit SIPProxyAddr is NULL[vpapi_Voip_SetCfg]key=SIPProxyPort, value=5060
[vpapi_Voip_SetCfg]key=Outbound, value=
[vpapi_Voip_SetCfg]key=SBRegistrarServer, value=
[vpapi_Voip_SetCfg]key=SBRegistrarServerPort, value=5060
VpVoipbasicInit SBSIPProxyAddr is NULL[vpapi_Voip_SetCfg]key=SBSIPProxyPort, value=5060
[vpapi_Voip_SetCfg]key=SBOutbound, value=
[vpapi_Voip_SetCfg]key=HeartbeatCycle, value=0
[: missing ]
[vpapi_Voip_SetCfg]key=PRACKEnable, value=1
[vpapi_Voip_SetCfg]key=INIT_UNREG, value=0
[vpapi_Voip_SetCfg]key=SessExpireTimer, value=1800
[vpapi_Voip_SetCfg]key=MinSessExpireTimer, value=90
[vpapi_Voip_SetCfg]key=SeS-S Refresher, value=1
[vpapi_Voip_SetCfg]key=SessMethod, value=2
[vpapi_Voip_SetCfg]key=TelephoneEventPayloadType, value=97
[vpapi_Voip_SetCfg]key=SIGDSCPMark, value=0
[vpapi_Voip_SetCfg]key=RTPDSCPMark, value=0
[vpapi_Voip_SetCfg]key=LineEnable, value=No
[vpapi_Voip_SetCfg]key=SIPDisplayName, value=
[vpapi_Voip_SetCfg]key=SIPURI, value=
[vpapi_Voip_SetCfg]key=AuthUserName, value=
busybox (1030): drop_caches: 3
[vpapi_Voip_SetCfg]key=AuthPassword, value=
[vpapi_Voip_SetCfg]key=SIPDisplayNumber, value=
[vpapi_Voip_SetCfg]Can't Match the key:SIPDisplayNumber
[vpapi_Voip_SetCfg]key=Region, value=CHINA
[vpapi_Voip_SetCfg]key=SIPDomain, value=
[vpapi_Voip_SetCfg]Can't Match the key:SIPDomain
[vpapi_Voip_SetCfg]key=DTMFTransportMode, value=0
[vpapi_Voip_SetCfg]key=FlashOffTransSetting, value=None
[vpapi_Voip_SetCfg]Can't Match the key:FlashOffTransSetting
[vpapi_Voip_SetCfg]key=HotLineMode, value=
[vpapi_Voip_SetCfg]Can't Match the key:HotLineMode
[vpapi_Voip_SetCfg]key=HotLineActNum, value=
[vpapi_Voip_SetCfg]Can't Match the key:HotLineActNum
[vpapi_Voip_SetCfg]key=CallWaitType, value=
[vpapi_Voip_SetCfg]Can't Match the key:CallWaitType
[vpapi_Voip_SetCfg]key=NoRegDialToneEnable, value=
[vpapi_Voip_SetCfg]Can't Match the key:NoRegDialToneEnable
[vpapi_Voip_SetCfg]key=PolarityReversalMode, value=
[vpapi_Voip_SetCfg]key=VoiceCodecPriorityCtrl, value=
[vpapi_Voip_SetCfg]Can't Match the key:VoiceCodecPriorityCtrl
[vpapi_Voip_SetCfg]key=NumberMatchMode, value=2
[vpapi_Voip_SetCfg]key=UrlPortEnable, value=0
[vpapi_Voip_SetCfg]key=SubsReg, value=0
[vpapi_Voip_SetCfg]key=SubsUA, value=1
[vpapi_Voip_SetCfg]key=PheaderCid, value=1
[vpapi_Voip_SetCfg]key=PAccessNwifEnable, value=0
Loading /userfs/lib/modules/sys_mod.ko
[vpapi_Voip_SetCfg]key=SubscribeExpire, value=86400
[vpapi_Voip_SetCfg]key=ActLocalSupplementService, value=1
[vpapi_Voip_SetCfg]key=SupportSpecCharTransfer, value=
[vpapi_Voip_SetCfg]key=RegistrationExpire, value=600
[vpapi_Voip_SetCfg]key=RegisterRetryInterval, value=120

[vpapi_Voip_SetCfg]key=EchoCancellationEnable, value=1
module loaded /userfs/lib/modules/sys_mod.[vpapi_Voip_SetCfg]key=VoiceVolumeSpeak, value=0
ko
Loading /userfs/lib/modules/DSPCore.ko
[vpapi_Voip_SetCfg]key=VoiceVolumeListen, value=0
[vpapi_Voip_SetCfg]key=SIPCallWaitingEnable, value=
[vpapi_Voip_SetCfg]key=SIPCallTransfer, value=
module loaded /userfs/lib/modules/DSPCore.ko[vpapi_Voip_SetCfg]key=SIPCallForwardUnconditionalNumber, value=

[vpapi_Voip_SetCfg]key=SIPCallForwardOnBusyNumber, value=
module loaded /userfs/lib/modules/DSPCore.ko
[vpapi_Voip_SetCfg]key=SIPCallForwardOnNoAnswerNumber, value=
[vpapi_Voip_SetCfg]key=SIPCallForwardUnconditionalEnable, value=
Loading /userfs/lib/modules/pcm[vpapi_Voip_SetCfg]key=SIPCallForwardOnBusyEnable, value=
1.ko
[vpapi_Voip_SetCfg]key=SIPCallForwardOnNoAnswerEnable, value=
[vpapi_Voip_SetCfg]key=NoAnswerNCFWaitTime, value=
[vpapi_Voip_SetCfg]Can't Match the key:NoAnswerNCFWaitTime
pcm clk source selected
[1] PCM V2.4 (Jun 20 2017 16:42:01)
plat_set_irq_affinity: cpu 0
plat_set_irq_affinity: cpu 0 vpe_id 0
plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 1 irq_vpe1 1, irq = 12
plat_set_irq_affinity: irq num 12
[vpapi_Voip_SetCfg]key=SIPCallConferenceEnable, value=1
[vpapi_Voip_SetCfg]key=CallIDMode, value=SDMF
[vpapi_Voip_SetCfg]key=HookMinInterval, value=80
[vpapi_Voip_SetCfg]key=HookMaxInterval, value=500
[vpapi_Voip_SetCfg]key=HookReleaseMin, value=550
[vpapi_Voip_SetCfg]Can't Match the key:HookReleaseMin
module loaded [vpapi_Voip_SetCfg]key=SyncCallerTimeEnable, value=
/userfs/lib/modules/pcm1.ko
[vpapi_Voip_SetCfg]key=HotLineEnable, value=
module loaded /userfs/lib/modules/pcm1.ko
[vpapi_Voip_SetCfg]key=HotLineDelayVer, value=1
[vpapi_Voip_SetCfg]key=HotLineNumber, value=
Loading /userfs/lib/modules/lec.[vpapi_Voip_SetCfg]key=HotLineNODIAL_URI, value=
ko
[vpapi_Voip_SetCfg]key=HotLineDelayTime, value=5
[vpapi_Voip_SetCfg]key=SIPCallForwardUnconditionalNumber, value=
module loaded /userfs/lib/modules/[vpapi_Voip_SetCfg]key=SIPCallForwardOnBusyNumber, value=
lec.ko
[vpapi_Voip_SetCfg]key=SIPCallForwardOnNoAnswerNumber, value=
[vpapi_Voip_SetCfg]key=enableDigitmapX, value=1
module loaded /userfs/lib/modules/lec.ko
Loading /userfs/lib/modules/spi.ko
Major Num:255, device: spi
module loaded /userfs/lib/modules/spi.ko
[vpapi_Voip_SetCfg]key=SpecificDigitmap, value=
[vpapi_Voip_SetCfg]key=EnableSpecificNumber, value=1
module loaded /userfs/lib/modules/spi.ko
[vpapi_Voip_SetCfg]key=PBXPrefix, value=
Loading slic3_sep.ko
[vpapi_Voip_SetCfg]key=PBXPrefixEnable, value=
[vpapi_Voip_SetCfg]key=PBXDialSecondaryEnable, value=
init mod-slic3
ZSI
[vpapi_Voip_SetCfg]key=StartDigitTimer, value=15
[vpapi_Voip_SetCfg]key=InterDigitTimerShort, value=2
module loaded slic3_sep.ko
[vpapi_Voip_SetCfg]key=InterDigitTimerLong, value=5
[vpapi_Voip_SetCfg]key=InterDigitTimerT, value=5
module loaded slic3_sep.ko
Loading fxs3
[vpapi_Voip_SetCfg]key=BusyToneTimer, value=40
[vpapi_Voip_SetCfg]key=HangingReminderToneTimer, value=60
[vpapi_Voip_SetCfg]key=TerminatingDigitProcessMode, value=
[vpapi_Voip_SetCfg]key=FaxT38Codec, value=0
[vpapi_Voip_SetCfg]key=FaxVbdCodec, value=1
[vpapi_Voip_SetCfg]key=FaxPrefCodec, value=PCMA
MacTableInsertEntry-5G
wcid=1, mactab-size=1 type=1 connect_tick=4294940251
mac=d8:bb:2c:cd:89:8a
[vpapi_Voip_SetCfg]key=ModemPrefCodec, value=PCMA
update_associated_mac_entry(): Peer's PhyCap=>Mode:VHT, BW:80M
updateDevBandWidthMac:index=1,d8:bb:2c:cd:89:8a
updateDevBandWidthMac:index=1,d8:bb:2c:cd:89:8a
[vpapi_Voip_SetCfg]key=FaxCtrlMode, value=0
[vpapi_Voip_SetCfg]key=CodecPrioritylist, value=G711A\|20\|1;G722\|20\|2;G711U\|20\|3;G729\|20\|4
init slicFunc slic1:9
SPI_Reset
[vpapi_Voip_SetCfg]key=VAD, value=0
[vpapi_Voip_SetCfg]key=SilenceCompressionEnable, value=No
[vpapi_Voip_SetCfg]Can't Match the key:SilenceCompressionEnable
[vpapi_Voip_SetCfg]key=LogEnable, value=No
[vpapi_Voip_SetCfg]Can't Match the keyogEnable
[vpapi_Voip_SetCfg]key=LogServerIP, value=
[vpapi_Voip_SetCfg]Can't Match the keyogServerIP
pcm1 ch num:1 pcm2 ch num:0
Init fxsNum(1) + fxoNum(0) = slic_ch_num(:1) , deviceNum(1)
[vpapi_Voip_SetCfg]key=LogServerPort, value=
[vpapi_Voip_SetCfg]Can't Match the keyogServerPort
[vpapi_Voip_SetCfg]key=Vplog_Gen, value=4
module loaded fxs3
[vpapi_Voip_SetCfg]key=Vplog_Stk, value=4
[vpapi_Voip_SetCfg]key=Vplog_Ctr, value=4
[vpapi_Voip_SetCfg]key=Vplog_Reg, value=4
[vpapi_Voip_SetCfg]key=Vplog_Dsp, value=4
[vpapi_Voip_SetCfg]key=Vplog_Tel, value=4
[vpapi_Voip_SetCfg]key=Vplog_Dig, value=4
module loaded fxs3
Loading /userfs/lib/modules/sysbase.ko
[vpapi_Voip_SetCfg]key=Vplog_Rst, value=4
Rcv Wcid(1) AddBAReq
Start Seq = 00000000
[vpapi_Voip_SetCfg]key=UaHeaderInfo, value=V10.00.923R001
AP SETKEYS DONE - WPA2, AuthMode(7)=WPA2PSK, WepStatus(6)=AES, GroupWepStatus(4)=TKIP

vpos module loading
MXP_TMR: notice linux timer base tick 100.
vpos module loaded
[provision_apply(6478)] content 1  ,voice_en No, iad_state None
[provision_apply:6535]voice_state:0
module loaded /userfs[TTT_TTT]VpVoipSettingsEnd :3970
/lib/modules/sysbase.ko
module loaded /userfs/lib/modules/sysbase.ko
[TTT_TTT]VpVoIPAppSwitch :7093 |Protocol:sip !!
VoIPBasic_Common SIPProtocol is SIP
voip_basic_boot: prevSipStatus is 0
Loading /userfs/lib/modules/sysmgmt.ko
MXP memory module loaded
module loaded /userfs/lib/modules/sysmgmt.ko
module loaded /userfs/lib/modules/sysmgmt.ko
Loading /userfs/lib/modules/vpspi.ko
module loaded /userfs/lib/modules/vpspi.ko
module loaded /userfs/lib/modules/vpspi.ko
Loading /userfs/lib/modules/commonapi.ko

SPI_Reset

SPI_Reset
vpslicopt module loaded
module loaded /userfs/lib/modules/commonapi.ko
module loaded /userfs/lib/modules/commonapi.ko
Loading /userfs/lib/modules/slicapi.ko
vpslic module start loading
Get companding from product config
tiu_if_init : num_tids = 1
raw=0x974b4000(inst=974b4000) page=4096 n=2
tids=1, TELE_ID=LE9641
tid_str_table[0].string=FXOY__tmp_str=LE9641
tid_str_table[1].string=LE9641__tmp_str=LE9641
[kevin]tid_init type=73
[kevin]tid_init tcid=0
tiu_linux_tmrinit: Enter!
init_tiu_poll_work, enter!
<4> create workqueue tq_4294940355 success.
module loaded /userfs/lib/modules/slicapi.ko
module loaded /userfs/lib/modules/slicapi.ko
Loading /userfs/lib/modules/ksocket.ko
init mod-ksocket
module loaded /userfs/lib/modules/ksocket.ko
module loaded /userfs/lib/modules/ksocket.ko
Loading /userfs/lib/modules/ortp.ko
sh: /userfs/bin/mobile-manager: not found
module loaded /userfs/lib/modules/ortp.ko
module loaded /userfs/lib/modules/ortp.ko
Loading /userfs/lib/modules/acodec_x.ko
init mod-acodec
module loaded /userfs/lib/modules/acodec_x.ko
module loaded /userfs/lib/modules/acodec_x.ko
Loading /userfs/lib/modules/foip.ko
Sorry, rule does not exist.
[TTT_TTT]StorageAcceS-S Right_boot,7857
init mod-foip3
module loaded /userfs/lib/modules/foip.ko
module loaded /userfs/lib/modules/foip.ko
Loading /userfs/lib/modules/ovdsp.ko

===============================
|| MTK DSP init successfully ||
===============================

module loaded /userfs/lib/modules/ovdsp.ko
module loaded /userfs/lib/modules/ovdsp.ko
Loading /userfs/lib/modules/pcmDump.ko
dbgTool_init init v2.0
module loaded /userfs/lib/modules/pcmDump.ko
module loaded /userfs/lib/modules/pcmDump.ko


write_irq_affinity new_value origin value is 00000008



write_irq_affinity new_value changed value is 00000002

plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 0 irq_vpe1 1, irq = 12
plat_set_irq_affinity: irq num 12
enable=1,000001309b40,actionType=0
enable=1,000001309b40,actionType=0
--------------dbus_boot-------------------------------
[do_iptables][600]entryIdx = 0, act = 0
iptables: No chain/target/match by that name.
thread_monitor  Enter!
udhcpd (v0.9.9-pre) started
Jan  1 00:00:33 TCSysLog udhcpd[983]: udhcpd (v0.9.9-pre) started
thread_monitor  Enter!
setting line discipline hook
thread_monitor  Enter!
Unable to open /etc/udhcpd.leases for reading
Jan  1 0pppd: wait pon up.
0:00:33 TCSysLog udhcpd[983]: Unable to open /etc/udhcpd.leases for reading
bind qdma_lan to cpu0
set olt type: 196610
[netlink_open_connection][431]binding nfnetlink_queue as nf_queue handler
MulticastFilterTableInsertEntry: already in Members list.
MulticastFilterTableInsertEntry: already in Members list.
MulticastFilterTableInsertEntry: already in Members list.
pi

mipsmt_sys_sched_setaffinity new_mask origin value is 00000008

d

mipsmt_sys_sched_setaffinity new_mask changed value is 00000002

1119's current affinity mask: 1


write_irq_affinity new_value origin value is 00000007



write_irq_affinity new_value changed value is 00000001

plat_set_irq_affinity: cpu 0
plat_set_irq_affinity: cpu 0 vpe_id 0
plat_set_irq_affinity: irq_vpe0 1 irq_vpe1 0, irq = 22
plat_set_irq_affinity: irq num 22
[netlink_open_connection][450]binding this socket to queue '0'
[netlink_open_connection][459]setting copy_packet mode
NSH_work_routine handle: dst_srv NSH_MAIN, msg_type 3
pid 1119's new affinity mask: 2
SIOCSIFADDR: File exists
bind qdma_wan to cpu1


write_irq_affinity new_value origin value is 00000008



write_irq_affinity new_value changed value is 00000002

plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 0 irq_vpe1 1, irq = 23
plat_set_irq_affinity: irq num 23

Attribute ftp_username not fetch value!bind ra0 to cpu1



write_irq_affinity new_value origin value is 00000008



write_irq_affinity new_value changed value is 00000002

plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 0 irq_vpe1 1, irq = 24
plat_set_irq_affinity: irq num 24

Attribute ftp_username1 not fetch value!
Attribute ftp_username2 not fetch value!
Attribute ftp_username3 not fetch value!
NSH_work_routine handle: dst_srv nsh_srv_dnsmasq_name, msg_type 270
sed: /tmp/dnsmasq_need_portbind_info: No such file or directory
bind rai0 to cpu1


write_irq_affinity new_value origin value is 00000008



write_irq_affinity new_value changed value is 00000002

plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 0 irq_vpe1 1, irq = 25
plat_set_irq_affinity: irq num 25

Attribute ftp_username4 not fetch value!
Attribute ftp_username5 not fetch value!
valid subcommands:
adsl

no valid ftp account, set useradmin/pwd as a default!killall: dnsmasq: no process killed


parameter_init(), buf = [TTT_TTT]>>>Enter:VpSendVoIPNetworkParams:7759 [if
parameter_init(), buf = name:br0]
[TTT_TTT]<<<Exit:VpSendVoIPNetworkParams:7781 [ifname:br0]
====> soc
Server:accepted cli_sock=13!!!!!
kfd=8
==>connect ret=0 connected to upnpsock
pi

mipsmt_sys_sched_setaffinity new_mask origin value is 00000008



mipsmt_sys_sched_setaffinity new_mask changed value is 00000002

d 1058's current affinity mask: 1
no other client connect!
pid 1058's new affinity mask: 2
dhcpc: wait pon up.
qos_boot: init app mode for boot []
tcapi_save: tid[1200], taskName[dbus-manager], callerAddr[0x004b9888]
NSH_work_routine handle: dst_srv nsh_srv_portbind, msg_type 395

Send OAM Update config!
!
pon_vlan_init

Multi Lan portpi

mipsmt_sys_sched_setaffinity new_mask origin value is 00000008

d

mipsmt_sys_sched_setaffinity new_mask changed value is 00000002

1142's current affinity mask: 1
done
pid 1142's new affinity mask: 2
insmod: cannot insert `/lib/modules/3.18.21/kernel/net/bridge/netfilter/ebt_ip.ko': File exists (-1): File exists

initilize xpon igmp module....done!
pon_mac_filter_init

Multi Lan portInterface doesn't ac
read WLAN driver from rt_device failed,set with default value!
cept private ioctl...
e2p (8BE7): Network is down

Attribute smb_username not fetch value!insmod: cannot insert `/lib/modules/3.18.21/kernel/net/bridge/netfilter/ebt_ip6.ko': File exists (-1): File exists
Attribute smb_username1 not fetch value!

Attribute smb_username2 not fetch value!
Attribute smb_username3 not fetch value!pi


mipsmt_sys_sched_setaffinity new_mask origin value is 00000008

d

mipsmt_sys_sched_setaffinity new_mask changed value is 00000002

1140's current affinity mask: 1

Attribute smb_username4 not fetch value!
Attribute smb_username5 not fetch value!
QOSCMD=qoscmd switch on IPVersion all
goptionasdfasd = 3
pid 1140's new affinity mask: 2

no valid samba account, set useradmin/pwd as a default!Jan  1 00:00:38 TCSysLog udhcpd[1203]:
i will reinit host.
Jan  1 00:00:38 TCSysLog udhcpd[1203]: sending OFFER of 192.168.1.2
ctromfile.cfg
pi


mipsmt_sys_sched_setaffinity new_mask origin value is 00000008

d

mipsmt_sys_sched_setaffinity new_mask changed value is 00000002

1141's current affinity mask: 1
pid 1141's new affinity mask: 2
module return value 0
current modules loaded
no use usb monitor & plugin monitor
no use bandwidth any longer
info_utility 3004 0 - Live 0xc1ee5000 (PO)
ebt_tc 1072 0 - Live 0xc1ea2000
ponmacfilter 11402 0 - Live 0xc1e77000 (O)
xpon_igmp 80863 0 - Live 0xc1e46000 (O)
ebt_ftos 1184 0 - Live 0xc1e1e000
ponvlan 128249 1 xpon_igmp, Live 0xc1dc0000 (O)
pcmDump 5636 0 - Live 0xc1b09000 (PO)
ovdsp 278156 0 - Live 0xc1aa2000 (O)
foip 372000 1 ovdsp, Live 0xc19c0000 (PO)
acodec_x 337567 1 ovdsp, Live 0xc18bc000 (PO)
ortp 124714 1 ovdsp, Live 0xc1800000 (O)
ksocket 3926 3 pcmDump,ovdsp,ortp, Live 0xc17c6000 (PO)
slicapi 331326 0 - Live 0xc175e000 (O)
commonapi 1561 0 - Live 0xc16d5000 (PO)
vpspi 4134 2 slicapi,commonapi, Live 0xc16c9000 (O)
sysmgmt 4555 0 - Live 0xc16b8000 (PO)
sysbase 363736 2 slicapi,sysmgmt, Live 0xc164a000 (O)
fxs3 212062 2 ovdsp,ortp, Live 0xc1605000 (PO)
slic3_sep 3774 1 fxs3, Live 0xc15ab000 (PO)
spi 22260 2 vpspi,slic3_sep, Live 0xc159e000 (PO)
lec 82034 2 pcmDump,fxs3, Live 0xc157b000 (PO)
pcm1 19702 0 - Live 0xc155d000 (PO)
DSPCore 38866 7 pcmDump,ovdsp,ortp,fxs3,slic3_sep,lec,pcm1, Live 0xc1541000 (PO)
sys_mod 2769 4 ovdsp,ortp,fxs3,DSPCore, Live 0xc1531000 (O)
hw_nat 193073 0 - Live 0xc11e2000 (PO)
loopdetect 14440 0 - Live 0xc11a5000 (PO)
mt7603eap 1440624 0 - Live 0xc0e6c000 (O)
swqos 15685 0 - Live 0xc0c24000 (PO)
xponmap 38650 0 - Live 0xc0c0a000 (O)
xpon 270425 6 ponmacfilter,xpon_igmp,ponvlan,xponmap, Live 0xc0ba6000 (O)
phy 172258 0 - Live 0xc0b0d000 (O)
qdma_wan 151415 1 xpon, Live 0xc0a84000 (PO)
eth_ephy 109126 1 loopdetect, Live 0xc0875000 (PO)
eth 116728 8 ponmacfilter,xpon_igmp,ponvlan,ortp,hw_nat,loopdetect,xpon,eth_ephy, Live 0xc081f000 (PO)
qdmagoptionasdfasd = 3
_lan 117663 0 - Live 0xc07c5000 (PO)
fe_core 29411 1 hw_nat, Live 0xc0784000 (PO)
bandwidth 8701 0 - Live 0xc0699000 (O)
sif 20143 1 phy,[permanent], Live 0xc0687000 (PO)
tccicmd 78303 6 mt7603eap,swqos,xpon,eth_ephy,eth,sif, Live 0xc065e000 (PO)
tcledctrl 43068 10 fxs3,slic3_sep,hw_nat,mt7603eap,xpon,phy,eth,tccicmd, Live 0xc0625000 (PO)
urlfilter 13354 0 - Live 0xc0607000 (O)
accesslimit 22974 0 - Live 0xc05f5000 (O)
fuse 86633 0 - Live 0xc05c8000
usb_storage 40879 0 - Live 0xc058f000
nls_cp936 120704 0 - Live 0xc0554000
nls_utf8 928 0 - Live 0xc0530000
sd_mod 31155 0 - Live 0xc051e000
scsi_mod 102887 2 usb_storage,sd_mod, Live 0xc04e8000
tcportbind 10131 0 - Live 0xc04ad000 (O)
tcsmux 26188 0 - Live 0xc0498000 (O)
vlantag_ct 7706 1 tcsmux, Live 0xc0486000 (O)
module_sel 1442 0 - Live 0xc0479000 (PO)
maxnetdpi 5018 0 - Live 0xc0471000 (O)
ebt_arp 1648 0 - Live 0xc0441000
ebt_vlan 1104 0 - Live 0xc043b000
ebt_mark 800 0 - Live 0xc0435000
ebtable_broute 896 0 - Live 0xc042b000
iptable_filter 944 1 - Live 0xc0425000
ebt_ip6 2032 0 - Live 0xc041f000
ebt_ip 1792 0 - Live 0xc0418000
ebtable_filter 1072 1 - Live 0xc040e000
ebtables 18428 2 ebtable_broute,ebtable_filter, Live 0xc0404000
efi_mod 6304 0 - Live 0xc03ad000 (P)
Jan  1 00:00:39 TCSysLog udhcpd[1203]: sending ACK to 192.168.1.2
ctromfile.cfg
Starting application /userfs/usr/sbin/sipclient
[saveFlashProcFun] saveFile /tmp/tcapi_save_req_tmp_file_1

Please press Enter to activate this console. Unlocking romfile ...
Writing from /tmp/tcapi_save_req_tmp_file_1 to romfile ...
[w]ip=255.255.255.0                                                                                                                                                not Error writing tclinux,mtd=romfile.

Rcv Wcid(1) AddBAReq
Start Seq = 00000000
/usr/bin/iconv: cat: No such file or directory
Unlocking reservearea ...
Erase one sector from 0x0 of reservearea ...
tcoffset:0x0,mtdInfo.size:0x1c0000 size-1:1ffff
enter real action ----- tcoffset:0x0                                                                                                                                 [e]mtd[writeflash]:device=reservearea tclen=262144 tcoffset=0 tcfilelen =13823
Unlocking reservearea ...
killall: dnsmasq: no process killed
Writing from /tmp/tcapi_save_req_tmp_file_1 to reservearea ...
enter real action -----tclen:0x40000,tcoffset:0x0
writeflash: write 0 'st sector,start from 0x0,0xbusybox (1539): drop_caches: 3
20000MulticastFilterTableDeleteEntry: the Group doesn't exist.
bytes                                                                                                                                                               [w]killall: bndstrg: no process killed
enter real action -----tclen:0x20000,tcoffset:0x20000
writeflash: write 1 'st sector,start from 0x20000,0x20000 bytes
read:count <= 0                                                                                                                                                     writeflash: total write 0x35ff bytes

NSH_work_routine handle: dst_srv nsh_srv_route, msg_type 352
Interface doesn't accept private ioctl...
set (8BE2): Network is down
Interface doesn't accept private ioctl...
set (8BE2): Network is down
=====socket fd :5
Interface doesn't accept private ioctl...
set (8BE2): Network is down
Successfully locked range: start=0x004ec000, end=0x004ed000, len=0x00001000
mxp_initHandle, mxpFd 3.
Interface doesn't accept private ioctl...
set (8BE2): Network is down
XgetTicksRate: 100
src/lmxpmain.c:main:1004 add mxp_sig_ignore!!
Interface doesn't accept private ioctl...
set (8BE2): Network is down
startsmbfilepwent_internal: file /etc/samba/smbpasswd did not exist. File successfully created.
[main]Initialize bndstrg
[driver_wext_init]Initialize ralink wext interface
Thread 1 = mxproot, priority -1
user level MXP memory module loaded
APP_tiuhw_<0> mmap_kmem page_addr 000174b4.
an_init_module, 808: hit!
Hardware configuration: num_of_tcids = 1
no_of_tids = 1
companding = 0
poll_mode 1
_common_tiuo_get_hw_inst, 1035, sizeof(Tiu_hw_inst_data) 1144, tcids 1.
Memory mapped for 1 TCIDS
mlxDbgInit: MXDebug_segm_storage = 8791e0, MXDebug_segm_id = 0.
>>>> rootInit <<<<<
Creating Golden Gateway application...
Thread 3 = ROOT, priority 0
Escaping to MXP command shell. Use 'exit' to exit.
Thread 4 = NWIF01, priority 1
4294941836 - GG_PERM_STORAGE=685732 mem_params.perm_size=685736, mem_params.perm_addr=0x0x76ec700
4294941836 - gg_alloc_storage=0x45094 mem_params.dynam_size=0x45098, mem_params.dynam_addr=0x0x76e81008
4294941836 - gg_mem_init partition GGMA : partition 0x00010000 block_size 74, total_blocks 150

4294941836 - gg_mem_init partition GGMB : partition 0x00010001 block_size 138, total_blocks 60

4294941836 - gg_mem_init partition GGMC : partition 0x00010002 block_size 304, total_blocks 60

4294941836 - gg_mem_init partition GGMD : partition 0x00010003 block_size 408, total_blocks 15

4294941836 - gg_mem_init partition GGME : partition 0x00010004 block_size 704, total_blocks 15

4294941836 - gg_mem_init partition GGMF : partition 0x00010005 block_size 1624, total_blocks 10

4294941836 - gg_mem_init partition GGMG : partition 0x00010006 block_size 2524, total_blocks 9

4294941836 - gg_mem_init partition GGMH : partition 0x00010007 block_size 36024, total_blocks 5

4294941836 - NWIF: nw_create_ccbs(): creating 8 ccbs.
4294941836 - Network: nw_create_sock_map(): creating a map of 72 sockets.
4294941836 - DSP_RT: -1, Enter - adapter_rt_init
4294941836 - DSP_RT: 1, dsp_init adamChanStop (0, 8774864)
4294941836 - DSP_RT: 1, dsp_init adamChanStop (0, 8774864)
4294941836 - ROOT: Creating Golden Gateway Application
4294941836 - ROOT:Number of tcids in the system  1: 2
Thread 8 = DEX, priority 1
4294941846 - gg_evtmgr_module_init
4294941846 - ISU: Creating...
4294941846 - gg_evtmgr_register_event module ISU, base 0x1, num_eventmgrs 0x1
4294941846 - current_base 0x0, mask 1
4294941846 - gg_evtmgr_register_event 0x50c060 0x50b76c
4294941846 - ISU: isu_module_init isu_event_base 0x0, task 0x0

4294941846 - ROOT: ISU created
4294941846 - CCU: Creating...
4294941846 - gg_evtmgr_register_event module CCU, base 0x4, num_eventmgrs 0x2
4294941846 - current_base 0x1, mask e
4294941846 - gg_evtmgr_register_event 0x501834 0x502c5c
4294941846 - CCU: ccu_module_init ccu_event_base 0x1, task 0x0
4294941846 - ROOT: CCU created
4294941846 - AMU: Creating...
4294941846 - gg_evtmgr_register_event module AMU, base 0x5, num_eventmgrs 0x3
4294941846 - current_base 0x4, mask 10
4294941846 - gg_evtmgr_register_event 0x4665b0 0x4663f0
4294941846 - AMU: amu_module_init amu_event_base 0x4, task 0x0

4294941846 - SPU: *, SM create
4294941846 - gg_evtmgr_register_event module SPU, base 0x6, num_eventmgrs 0x4
4294941846 - current_base 0x5, mask 20
4294941846 - gg_evtmgr_register_event 0x485910 0x4850d4
4294941846 - SPU: spu_module_init spu_event_base 0x5, task 0x0

4294941846 - gg_evtmgr_register_event module SFU, base 0x7, num_eventmgrs 0x5
4294941846 - current_base 0x6, mask 40
4294941846 - gg_evtmgr_register_event 0x49b018 0x499210
4294941846 - SFU: sfu_module_init sfu_event_base 0x6, task 0x0

4294941846 - ROOT: TSGM created
4294941846 - ATPM: Creating...
4294941847 - DCM: Creating DCM DB...
4294941847 - DCM: DB Created.
4294941847 - gg_evtmgr_register_event module ATPM, base 0x3, num_eventmgrs 0x1
4294941847 - current_base 0x0, mask 7
4294941847 - gg_evtmgr_register_event 0x45a200 0x4594f8
4294941847 - ROOT: ATPM module initialization
4294941847 - gg_evtmgr_create 0 5
4294941847 - gg_evtmgr_create 1 6
4294941847 - gg_evtmgr_get_taskid 5
4294941847 - CCU: ccu_create 5 queue 2 4
4294941847 - gg_evtmgr_get_taskid 5
4294941847 - ISU: isu_create 5 queue 1

4294941847 - gg_evtmgr_get_taskid 5
4294941847 - AMU: Created.
4294941847 - gg_evtmgr_get_taskid 5
4294941847 - SPU: spu_create 5 queue 20

4294941847 - gg_evtmgr_get_taskid 5
4294941847 - SFU: sfu_create 5 queue 40

4294941847 - SSMU: max_call_control_blocks = 7

4294941847 - initFreeCbs: freeCBs = 7

4294941847 - SSMU: Creating...

4294941847 - SSMU: Internal message queue created.

4294941847 - SSMU: Registered with XUEvt. ID = 2
4294941847 - SSMU: Task Created.

4294941847 - ROOT: SSMU created
4294941847 - gg_evtmgr_register_event module PSU, base 0x8, num_eventmgrs 0x6
4294941847 - current_base 0x7, mask 80
4294941847 - gg_evtmgr_register_event 0x45d958 0x45d888
4294941847 - ROOT: PSU created
4294941847 - gg_evtmgr_get_taskid 5
4294941847 - gg_evtmgr_get_taskid 6
4294941847 - ATPM: Created.
4294941847 - DEX: Creating...
4294941847 - TIU: Creating...
4294941847 - TIU: Requesting Perm Memory 1 blocks of 1276 bytes
4294941847 - TIU: 0, init
4294941850 - gg_evtmgr_main 0 current_base 0x8 nevtmgr 6
4294941850 - gg_evtmgr_main 0x50c060 0x50b76c
4294941850 - [RM]not use resource manager uint.
4294941850 - DSP_RT: -1, Can't find interface(12)
4294941850 - DSP_RT: -1, Can't find interface(13)
4294941850 - SPU: spup_init

4294941850 - gg_evtmgr_main 1 current_base 0x3 nevtmgr 1
4294941850 - gg_evtmgr_main 0x45a200 0x4594f8
4294941850 - DCM: Queue Created.
4294941850 - DCM: Creating Timers....
Added user useradmin.
killall: wscd: no process killed
[dnsmasq]>>>>>>>>>>>>dnsmasqIntflag>>>>>>>>>>>
NSH_work_routine handle: dst_srv nsh_service_wlan, msg_type 253
NSH_service_WLAN_init_if_ready: entry.

initialize VpInitDevice successed
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
ip6tables v1.4.10: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
Error generating presURL from http://192.168.1.1:49153/ + (null)
plat_set_irq_affinity: cpu 1
plat_set_irq_affinity: cpu 1 vpe_id 0
plat_set_irq_affinity: irq_vpe0 0 irq_vpe1 1, irq = 24
plat_set_irq_affinity: irq num 24
TX_BCN DESC b9869000 size = 320
RX[0] DESC ba6bf000 size = 1024
RX[1] DESC b9924000 size = 1024
cfg_mode=9
cfg_mode=9
wmode_band_equal(): Band Equal!
Key1Str is Invalid key length(1) or Type(0)
Key2Str is Invalid key length(1) or Type(0)
Key3Str is Invalid key length(1) or Type(0)
Key4Str is Invalid key length(1) or Type(0)
[PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0
[PMF]Set_PMFMFPR_Proc:: apidx=0, Desired MFPR=0
[PMF]Set_PMFSHA256_Proc:: apidx=0, Desired PMFSHA256=0
PS_RETRIEVE = 1
==>Set_RatePrior_Proc()
==>Set_LowRateRatio_Proc()
FW Version:ap_pcie
FW Build Date:20160107100755
ip6tables v1.4.10: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
sh: /tmp/etc/ipupfilter.shCmdAddressLenReqret = 0)
: not founCmdFwStartReq: override = 1, address = 1048576
dCmdStartDLRsp: WiFI FW Download Success

<==========AndesMTLoadFwMethod1
AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
efuse_probe: efuse = 10000002
RtmpChipOpsEepromHook::e2p_type=4, inf_Type=5
RtmpEepromGetDefault::e2p_dafault=1
RtmpChipOpsEepromHook: E2P type(4), E2pAccessMode = 4, E2P default = 1
NVM is BIN mode
1. Phy Mode = 14
MlmePeriodicExecTimer is Runing!
Cal Free IC!!
@@@  NICReadEEPROMParameters : pAd->FWLoad=0
sh: /tmp/etc/ipdownfilter.sh: not found
MlmePeriodicExecTimer is Runing!
now bb MainSsid mac 04:e0:b0:e8:58:80
Country Region from e2p = ffff
tssi_1_target_pwr_g_band = 34
2. Phy Mode = 14
3. Phy Mode = 14
NICInitPwrPinCfg(14): Not support for HIF_MT yet!
NICInitializeAsic(584): Not support rtmp_mac_sys_reset () for HIF_MT yet!
mt_mac_init()-->
mt7603_init_mac_cr()-->
AsicSetMacMaxLen(1831): Set the Max RxPktLen=1024!
<--mt_mac_init()
        WTBL Segment 1 info:
                MemBaseAddr/FID:0x28000/0
                EntrySize/Cnt:32/128
        WTBL Segment 2 info:
                MemBaseAddr/FID:0x40000/0
                EntrySize/Cnt:64/128
        WTBL Segment 3 info:
                MemBaseAddr/FID:0x42000/64
                EntrySize/Cnt:64/128
        WTBL Segment 4 info:
                MemBaseAddr/FID:0x44000/128
                EntrySize/Cnt:32/128
MtAsicACQueue: Write CR:21510, Value=10421
MtAsicACQueue: Write CR:21500, Value=10421
AntCfgInit(2573): Not support for HIF_MT yet!
RTMPSetPhyMode(): channel out of range, use first ch=0
MCS Set = ff ff 00 00 00

Line 0:initialize VpInitLine successed
4294942046 - TIU: 0, set loop power deny on init
4294942046 - TIU: Registered with XUEvt. ID = 3
4294942046 - DEX: Created_
4294942046 - ROOT: DIM PLATFORM created
4294942046 - CMGR: Created.
4294942046 - ROOT: Call Mgr created
4294942046 - NMM: Build contains Only TIU.
4294942046 - nmmp_restore_config end
4294942046 - ROOT: NMM created
4294942046 - ROOT: All units and modules created
4294942047 - NMM: Starting Periodic Timer. rate=200 msec
4294942047 - sfu: init_feature_state on port=0, cw_feature_state = 0 , per_call_state = 0
4294942048 - SFU: Registered with XUEvt. ID = 6
4294942048 - DCM: Timer Created.
4294942070 - !! NMM Server Started !!
4294942070 - SIP_FORCEUPDATE_CIDDATE already exists!

4294942070 - IC_CARD_TIMER_A already exists!

4294942070 - RTCP_AUTO_MANAGE already exists!

4294942070 - the queue NMMQ post the event : msg_id is 5, eventId is 29
4294942070 - the queue NMMQ wait the event: msg_id is 5, eventId is 29
voice_app_ready:1269 Send Wan UP
4294942070 - VNIU: Recieved system event id=10010, type=0, size=0
[provision_event:8294]voice_state:0, temp 0x5218e0
Error generating presURL from http://192.168.1.1:49153/ + (null)
Error generating presURL from http://192.168.1.1:49153/ + (null)
Error generating presURL from http://192.168.1.1:49153/ + (null)
Error generating presURL from http://192.168.1.1:49153/ + (null)4294942083 - VNIU: Recieved system event id=10059, type=3, size=20
4294942083 - the queue NMMQ post the event : msg_id is 5, eventId is 145
4294942083 - the queue NMMQ wait the event: msg_id is 5, eventId is 145
4294942083 - nmm_process_voice_event event SYSTEM_NMMPROV recv, param=/var/tmp/romfile.cfg
OK
OK
Jan  1 00:00:48 printfserver: Accessor:[CPE] Method:[DEVICE WARNING] Para:[] Result:[0] [104108][PRIMARY] VOIP Configuration Changed!
4294942094 - nmm_set_tcid_cid_msg_type:0


Error generating presURL from http://192.168.1.1:49153/ + (null)
Error generating presURL from http://192.168.1.1:49153/ + (null)ip6tables v1.4.10: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
[provision_even
t:8Error generating presURL from http://192.168.1.1:49153/ + (null)31
7]voice_state:3
ip6tables v1.4.10: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.4.10: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.4.10: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.4.10: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
ip6tables v1.4.10: can't initialize ip6tables table `filter': Table does not exist (do you need to insmod?)
Perhaps ip6tables or your kernel needs to be upgraded.
4294942127 - NMM: 0, Switched CAS, FXS Loop Start
4294942127 - SSMU: med_gw= med_dev=
4294942127 - SSMU:* Local Media IP Set to 0.0.0.0
4294942127 - SSMU:* Local Media IP Set to 0.0.0.0, Media Dev Set to
4294942127 - NMM: open FLASH_CONFIG_TYPE_NSP_VERSION failed!

[PMF]ap_pmf_init:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[PMF]RTMPMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
BndStrg_Init()
AsicSetRalinkBurstMode(4146): Not support for HIF_MT yet!
RTMPSetPiggyBack(876): Not support for HIF_MT yet!
AsicSetTxPreamble(4133): Not support for HIF_MT yet!
AsicAddSharedKeyEntry(1997): Not support for HIF_MT yet!
AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0
Main bssid = 04:e0:b0:e8:58:80
<==== rt28xx_init, Status=0
@@@ ed_monitor_exit : ===>
@@@ ed_monitor_exit : <===
mt7603_set_ed_cca: TURN OFF EDCCA  mac 0x10618 = 0xd7083f0f, EDCCA_Status=0
jiffies=ffff9eb4, POLLING_MODE_DETECT_INTV=300
WiFi Startup Cost (ra0): 4.170s
There are some error when CPE getting data from EEPROM4294942399 - ============================================================
4294942399 - SSMU Inited RV SIP Stack Version 5.0.0.29 successfully!!
4294942399 - ============================================================
4294942406 - TIU: tiush_proc_msg: Invalid tiuo_ioctl parameter 10050
Jan  1 00:00:51 printfserver: Accessor:[CPE] Method:[DEVICE WARNING] Para:[] Result:[0] [104108][PRIMARY] VOIP Configuration Changed!
4294942422 - NMM: IP Address Received - 0/br0/192.168.1.1/255.255.255.0/0.0.0.0/0.0.0.0/0.0.0.0/0.0.0.0/1/0/0/0/0/0/0/192.168.1.1
4294942424 - SSMU:* Network status mask was 0x00000008
4294942424 - SSMU:* Network status mask is 0x00000008
device ra0 entered promiscuous mode
br0: port 6(ra0) entered forwarding state
br0: port 6(ra0) entered forwarding state
[dbus_signal_WPS:379] send signal queue_num=0
[WlanWPSClientEmitSignal,467]---enter,queue_num=0---
SendSignal2Server,193 : -----------> create_flag = 0
SaveSignalData2List,71 : save the signal data, when get dbus connect, then deal it
[WlanWPSClientEmitSignal,485]---exit---
4294942447 - NMM: 0, Switched CAS, FXS Loop Start
4294942448 - ============================================================
4294942448 - SSMU Destroyed RV SIP Stack!!
4294942448 - ============================================================
4294942448 - SSMU: med_gw= med_dev=br0
4294942448 - SSMU:* Local Media IP Set to 192.168.1.1
4294942448 - SSMU:* Local Media IP Set to 192.168.1.1, Media Dev Set to br0
4294942448 - NMM: open FLASH_CONFIG_TYPE_NSP_VERSION failed!

4294942449 - ============================================================
4294942449 - SSMU Inited RV SIP Stack Version 5.0.0.29 successfully!!
4294942449 - ============================================================
NSH_work_routine handle: dst_srv nsh_service_wlan, msg_type 250
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
[process_local_message][945] invalid entry index -1
############-NET_STATUS_DOWN-############
cwmpInitUPnPDMDeviceListTable: pDeviceList == NULL
tr069 tcapi mode is 2
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
killall: utelnetd: no process killed
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49154/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
Error generating presURL from http://192.168.1.1:49155/ + (null)
iptables: No chain/target/match by that name.
[dbus_signal_WPS:379] send signal queue_num=4
[WlanWPSClientEmitSignal,467]---enter,queue_num=4---
[GetWlanWPS5G:244] come into
SendSignal2Server,193 : -----------> create_flag = 0


网上没有找到923的相关信息,求各位有经验的师傅指点一下。
我的恩山、我的无线 The best wifi forum is right here.
发表于 2022-3-20 10:04 | 显示全部楼层
用putty进TTL试试?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2024-1-18 10:15 | 显示全部楼层
求各位有经验的师傅指点一下
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-25 04:03

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表