|
原先是5.3.3的固件,手贱从ubnt网上下载了一个6.1.7的web刷进去之后能ping通192.168.1.20,进不去web管理页面
TTL 连接M5一直停留在tftp页面
U-Boot 1.1.4.2-s1044 (Jun 21 2017 - 14:41:08)
DRAM: 32 MB
Flash: 8 MB
PCIe WLAN Module found (#1).
Net: eth0, eth1
Board: Ubiquiti Networks XM board (rev 0.0 e005)
Hit any key to stop autoboot: 0
Setting default IP 192.168.1.20
Starting TFTP server...
Using eth1 (192.168.1.20), address: 0x81000000
Will reset device configuration (Reset button active after 10 seconds).
Erasing sector 123..126
First 0x7b last 0x7e sector size 0x10000
.... done
Waiting for connection: Tx Timed out
Tx Timed out
使用TFTP重新刷5.6固件,最低版本就是5.6的。
https://www.ubnt.com.cn/download/airmax-m/nanostationm/nsm5
U-Boot 1.1.4.2-s1044 (Jun 21 2017 - 14:41:08)
DRAM: 32 MB
Flash: 8 MB
PCIe WLAN Module found (#1).
Net: eth0, eth1
Board: Ubiquiti Networks XM board (rev 0.0 e005)
Hit any key to stop autoboot: 0
Setting default IP 192.168.1.20
Starting TFTP server...
Using eth1 (192.168.1.20), address: 0x81000000
Will reset device configuration (Reset button active after 10 seconds).
Erasing sector 123..126
First 0x7b last 0x7e sector size 0x10000
.... done
Waiting for connection: len bad 46 < 2048
Receiving file from 192.168.1.13:56771
Received 7534209 bytes
Firmware Version: XM.ar7240.v5.6.15.sign.31612.170908.1458
Setting U-Boot environment variables
Un-Protected 1 sectors
Erasing Flash.... done
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
Will not overwrite u-boot partition! Skipped.
Copying partition 'kernel' to flash memory:
First 0x5 last 0x14 sector size 0x10000
................ done
write addr: 9f050000
Copying partition 'rootfs' to flash memory:
First 0x15 last 0x7a sector size 0x10000
...................................................................................................... done
write addr: 9f150000
Firmware update complete.
Resetting...
U-Boot 1.1.4.2-s1044 (Jun 21 2017 - 14:41:08)
DRAM: 32 MB
Flash: 8 MB
PCIe WLAN Module found (#1).
Net: eth0, eth1
Board: Ubiquiti Networks XM board (rev 0.0 e005)
Hit any key to stop autoboot: 0
Setting default IP 192.168.1.20
Starting TFTP server...
Using eth1 (192.168.1.20), address: 0x81000000
Will reset device configuration (Reset button active after 10 seconds).
Erasing sector 123..126
First 0x7b last 0x7e sector size 0x10000
.... done
Waiting for connection: -
AR7240+AR9280方案
刷完还是不引导系统,进TFTP
怎么解决呢?
板子图 不知道是不是正版的
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看,没有账号?立即注册
×
|