|
本帖最后由 逍遥137 于 2012-3-30 13:06 编辑
楼主问一下我的按设置好后打入motion -c motion.conf 命令后一直出来下面这个
BusyBox v1.15.3 (2012-01-09 08:56:37 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
Backfire (10.03.1, r29685) ------------------------
* 1/3 shot Kahlua In a shot glass, layer Kahlua
* 1/3 shot Bailey's on the bottom, then Bailey's,
* 1/3 shot Vodka then Vodka.
---------------------------------------------------
root@OpenWrt:~# motion -c motion.conf
[0] Configfile motion.conf not found - trying defaults.: No such file or directory
[0] Processing thread 0 - config file /etc/motion.conf
[0] Unknown config option "ffmpeg_cap_new"
[0] Unknown config option "ffmpeg_cap_motion"
[0] Unknown config option "ffmpeg_timelapse"
[0] Unknown config option "ffmpeg_timelapse_mode"
[0] Unknown config option "ffmpeg_bps"
[0] Unknown config option "ffmpeg_variable_bitrate"
[0] Unknown config option "ffmpeg_video_codec"
[0] Unknown config option "ffmpeg_deinterlace"
[0] Unknown config option "movie_filename"
[0] Unknown config option "timelapse_filename"
[0] Unknown config option "sql_log_image"
[0] Unknown config option "sql_log_snapshot"
[0] Unknown config option "sql_log_mpeg"
[0] Unknown config option "sql_log_timelapse"
[0] Unknown config option "sql_query"
[0] Thread config file /usr/local/etc/thread1.conf not found: No such file or directory
[0] Motion 3.2.11.1 Started
[0] Thread 1 is from /etc/motion.conf
[0] httpd bind(): Address already in use
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "Microsoft庐 LifeCam HD-5000"
[1] cap.bus_info: "usb-bcm63xx-1"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Error selecting input 0 VIDIOC_S_INPUT: Device or resource busy
[0] httpd thread exit
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Could not fetch initial image from camera
[1] Motion continues using width and height from config file(s)
[1] Resizing pre_capture buffer to 1 items
[1] bind(): Address already in use
[1] Problem enabling stream server in port 8081: Address already in use
[1] Thread exiting
[0] Motion thread 1 restart
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "Microsoft庐 LifeCam HD-5000"
[1] cap.bus_info: "usb-bcm63xx-1"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Error selecting input 0 VIDIOC_S_INPUT: Device or resource busy
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Could not fetch initial image from camera
[1] Motion continues using width and height from config file(s)
[1] Resizing pre_capture buffer to 1 items
[1] bind(): Address already in use
[1] Problem enabling stream server in port 8081: Address already in use
[1] Thread exiting
[0] Motion thread 1 restart
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "Microsoft庐 LifeCam HD-5000"
[1] cap.bus_info: "usb-bcm63xx-1"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Error selecting input 0 VIDIOC_S_INPUT: Device or resource busy
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Could not fetch initial image from camera
[1] Motion continues using width and height from config file(s)
[1] Resizing pre_capture buffer to 1 items
[1] bind(): Address already in use
[1] Problem enabling stream server in port 8081: Address already in use
[1] Thread exiting
[0] Motion thread 1 restart
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "Microsoft庐 LifeCam HD-5000"
[1] cap.bus_info: "usb-bcm63xx-1"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Error selecting input 0 VIDIOC_S_INPUT: Device or resource busy
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Could not fetch initial image from camera
[1] Motion continues using width and height from config file(s)
[1] Resizing pre_capture buffer to 1 items
[1] bind(): Address already in use
[1] Problem enabling stream server in port 8081: Address already in use
[1] Thread exiting
[0] Motion thread 1 restart
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "Microsoft庐 LifeCam HD-5000"
[1] cap.bus_info: "usb-bcm63xx-1"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Error selecting input 0 VIDIOC_S_INPUT: Device or resource busy
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Could not fetch initial image from camera
[1] Motion continues using width and height from config file(s)
[1] Resizing pre_capture buffer to 1 items
[1] bind(): Address already in use
[1] Problem enabling stream server in port 8081: Address already in use
[1] Thread exiting
[0] Motion thread 1 restart
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "Microsoft庐 LifeCam HD-5000"
[1] cap.bus_info: "usb-bcm63xx-1"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Error selecting input 0 VIDIOC_S_INPUT: Device or resource busy
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Could not fetch initial image from camera
[1] Motion continues using width and height from config file(s)
[1] Resizing pre_capture buffer to 1 items
[1] bind(): Address already in use
[1] Problem enabling stream server in port 8081: Address already in use
[1] Thread exiting
[0] Motion thread 1 restart
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "Microsoft庐 LifeCam HD-5000"
[1] cap.bus_info: "usb-bcm63xx-1"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Error selecting input 0 VIDIOC_S_INPUT: Device or resource busy
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Could not fetch initial image from camera
[1] Motion continues using width and height from config file(s)
[1] Resizing pre_capture buffer to 1 items
[1] bind(): Address already in use
[1] Problem enabling stream server in port 8081: Address already in use
[1] Thread exiting
[0] Motion thread 1 restart
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "Microsoft庐 LifeCam HD-5000"
[1] cap.bus_info: "usb-bcm63xx-1"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Error selecting input 0 VIDIOC_S_INPUT: Device or resource busy
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Could not fetch initial image from camera
[1] Motion continues using width and height from config file(s)
[1] Resizing pre_capture buffer to 1 items
[1] bind(): Address already in use
[1] Problem enabling stream server in port 8081: Address already in use
[1] Thread exiting
[0] Motion thread 1 restart
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "Microsoft庐 LifeCam HD-5000"
[1] cap.bus_info: "usb-bcm63xx-1"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Error selecting input 0 VIDIOC_S_INPUT: Device or resource busy
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Could not fetch initial image from camera
[1] Motion continues using width and height from config file(s)
[1] Resizing pre_capture buffer to 1 items
[1] bind(): Address already in use
[1] Problem enabling stream server in port 8081: Address already in use
[1] Thread exiting
[0] Motion thread 1 restart
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "Microsoft庐 LifeCam HD-5000"
[1] cap.bus_info: "usb-bcm63xx-1"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Error selecting input 0 VIDIOC_S_INPUT: Device or resource busy
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Could not fetch initial image from camera
[1] Motion continues using width and height from config file(s)
[1] Resizing pre_capture buffer to 1 items
[1] bind(): Address already in use
[1] Problem enabling stream server in port 8081: Address already in use
[1] Thread exiting
[0] Motion thread 1 restart
[1] Thread 1 started
[1] cap.driver: "uvcvideo"
[1] cap.card: "Microsoft庐 LifeCam HD-5000"
[1] cap.bus_info: "usb-bcm63xx-1"
[1] cap.capabilities=0x04000001
[1] - VIDEO_CAPTURE
[1] - STREAMING
[1] Error selecting input 0 VIDIOC_S_INPUT: Device or resource busy
[1] ioctl(VIDIOCGMBUF) - Error device does not support memory map
[1] V4L capturing using read is deprecated!
[1] Motion only supports mmap.
[1] Could not fetch initial image from camera
[1] Motion continues using width and height from config file(s)
[1] Resizing pre_capture buffer to 1 items
[1] bind(): Address already in use
[1] Problem enabling stream server in port 8081: Address already in use
[1] Thread exiting
摄像头用的是微软HD5000,同一路由我装了还了mjpeg-streamer,使用这个就没有问题
|
|