花钱求指导或维修 思科 E3200 刷番茄 刷死了 超级终端 putty 都进不去 CFE 即使 ...
思科 E3200 刷番茄 刷死了 超级终端 putty 都进不去 CFE 即使 显示 CFE 也大不了字(命令)CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Mar4 11:57:55 HKT 2011 (zhaoguang@sw1)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
This is a Serial Flash
Boot partition size = 262144(0x40000)
Found a 16MB ST compatible serial flash
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.127.28 @VERSION_TYPE@
CPU type 0x19749: 500MHz
Tot mem: 65536 KBytes
CFE mem: 0x80700000 - 0x807A02F0 (656112)
Data: 0x80735600 - 0x80739640 (16448)
BSS: 0x80739640 - 0x8073A2F0 (3248)
Heap: 0x8073A2F0 - 0x8079E2F0 (409600)
Stack: 0x8079E2F0 - 0x807A02F0 (8192)
Text: 0x80700000 - 0x807355F4 (218612)
Boot version: v5.9
The boot is CFE
Flash base: bfc00000, mac start: 3ef00
mac_init(): Find mac in location 1
Nothing...
No country code find
### CLKDIV= 0x80e0842, SFlashClkDiv=8 clkdivsf=2 ###
### Change it to 0x20e0842 (2) ###
Device eth0:hwaddr 58-6D-8F-1D-49-BA, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
cfe_led_init: start to set power LED and switch LEDs.
Loader:raw Filesys:tftp Dev:eth0 File:: Optionsnull)
Loading: .. 10679296 bytes read
Entry at 0x807a02f0
Loader:raw Filesys:memory Dev:eth0 File::0x807a02f0 Optionsnull)
Loading: . 0 bytes read
Failed.
Could not load :0x807a02f0: Error
CFE>
显示 CFE 但是打不上去字 花钱求指导或维修 JTAG??? 换个软件,用PUTTY QQ :122314184 http://tsli.taobao.com 随便拍个修砖连接吧 -_- 修好了吗,qq89736001
页:
[1]