linksys wrt610n v2 CFE没有中断提示无法中断怎么办
ttl已经可以读数据了，换了个usb-ttl的小板也不行。看了下启动数据，都没有提示按ctrl+C
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Jul 10 15:25:09 CST 2009 (ljh@team2-complier)
Copyright (C) 2000-2008 Broadcom Corporation.
Init Arena
Init Devs.
No DPN
This is a Parallel Flash
Boot partition size = 262144(0x40000)
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.10.56.51
CPU type 0x19740: 480MHz
Tot mem: 65536 KBytes
CFE mem: 0x80700000 - 0x8079DA10 (645648)
Data: 0x80732970 - 0x80736FD0 (18016)
BSS: 0x80736FD0 - 0x80737A10 (2624)
Heap: 0x80737A10 - 0x8079BA10 (409600)
Stack: 0x8079BA10 - 0x8079DA10 (8192)
Text: 0x80700000 - 0x8073296C (207212)
Boot version: v4.2
The boot is CFE
mac_init(): Find mac in location 0
Nothing...
country_init(): Find country code in location 0
The country is same
Device eth0:hwaddr 68-7F-74-1F-08-02, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Check CRC of image1
Header CRC: 0x1394D22F
Calculate CRC: 0x1394D22F
Image 1 is OK
Try to load image 1.
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3560 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU ProcId is: 0x00019740, options: 0x000021cd
Primary instruction cache 32kb, linesize 32 bytes (4 ways)
Primary data cache 32kb, linesize 32 bytes (4 ways)
Linux version 2.4.20 (ljh@team2-complier) (gcc version 3.2.3 with Broadcom modifications) #86 Fri Jul 10 15:23:23 CST 2009
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM4716 rev 1 at 480 MHz
Calibrating delay loop... 239.20 BogoMIPS
Memory: 62316k/65536k available (2018k kernel code, 3220k reserved, 136k data, 76k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction...unavailable.
POSIX conformance testing by UNIFIX
PCI: Using membase 8000000
PCI: Initializing host
PCI: Reset RC
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
NTFS driver v1.1.22
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 8) is a 16550A
HDLC line discipline: version $Revision$, maxframe=4096
N_HDLC line discipline registered.
PPP generic driver version 2.4.2
SCSI subsystem driver Revision: 1.00
Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
Flash device: 0x800000 at 0x1c000000
Physically mapped flash: squashfs filesystem found at block 974
(Not Found Lang Block)off=0xf3a48 off1=0x7e0000 size=0x800000
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "pmon"
0x00040000-0x007e0000 : "linux"
0x000f3a48-0x007e0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x007e0000-0x007f0000 : "lang"
0x007f0000-0x00800000 : "nvram"
Found a 0MBserial flash
sflash: found no supported devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
USB20H mdio control register : 0x8000000c
hcd.c: ehci-hcd @ 00:04.1, PCI device 14e4:471a
hcd.c: irq 5, pci mem b8004000
usb.c: new USB bus registered, assigned bus number 1
hcd/ehci-hcd.c: USB 0.0 support enabled, EHCI rev 1. 0
hub.c: USB hub found
hub.c: 2 ports detected
USB20H mdio control register : 0x80000018
usb-ohci.c: USB OHCI at membase 0xb8009000, IRQ 5
usb-ohci.c: usb-00:04.0, PCI device 14e4:471a
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 368 bytes per conntrack
IPSEC isakmp Support Max Pass-through .
ip_conntrack_rtsp v0.01 loading
ip_conntrack_l2tp: registering helper for port .
L2TP Support Max Pass-through .
Register NAT helper for port name .
ip_nat_rtsp v0.01 loading
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Register DIAG LED in /proc/sys/diag_blink.
cramfs: wrong magic
FAT: bogus logical sector size 11040
NTFS: Unable to set blocksize 512.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 76k freed
Algorithmics/MIPS FPU Emulator v1.5
cmd=
Using /lib/modules/2.4.20/kernel/drivers/net/ctmisc/ctmisc.o
Register /dev/ctmisc device, major:250 minor:0 width = 8bits
The boot is CFE
/dev/: cannot create
cmd=
type = [get_wsc_ctmisc_ioctl: cmd=0x26, buffer size=196
pin]
get_data()data_init(): base = 0xbc03fcdc
: cmd=0x26 countdata_init(): location = , mydatas index = 1
=8 len=8
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get WSC count is
get_data(): WSC 0:
get_data(): done
cmd=
type = ctmisc_ioctl: cmd=0x11, buffer size=196
get_data(): cmdata_init(): base = 0xbc001e00
d=0x11 count=8 ldata_init(): location = , mydatas index = 1
en=18
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get MAC count is
get_data(): MAC 0:
get_data(): done
cmd=
type = ctmisc_ioctl: cmd=0x15, buffer size=196
get_data(): cmdata_init(): base = 0xbc03fe30
d=0x15 count=8 ldata_init(): location = , mydatas index = 1
en=20
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get SN count is
get_data(): SN 0:
get_data(): done
cmd=
type = [get_counctmisc_ioctl: cmd=0x2c, buffer size=196
try]
get_data()data_init(): base = 0xbc03fe2c
: cmd=0x2c countdata_init(): location = , mydatas index = 1
=1 len=4
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get COUNTRY count is
get_data(): COUNTRY 0:
get_data(): done
cmd=
type = [get_2g_cctmisc_ioctl: cmd=0x2e, buffer size=196
ountry_code]
gedata_init(): base = 0xbc03fe28
t_data(): cmd=0xdata_init(): location = , mydatas index = 1
2e count=1 len=4ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get 2G_COUNTRY_CODE count is
get_data(): 2G_COUNTRY_CODE 0:
get_data(): done
cmd=
type = [get_5g_cctmisc_ioctl: cmd=0x5e, buffer size=196
ountry_code]
gedata_init(): base = 0xbc03fe24
t_data(): cmd=0xdata_init(): location = , mydatas index = 1
5e count=1 len=4ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get 5G_COUNTRY_CODE count is
get_data(): 5G_COUNTRY_CODE 0:
get_data(): done
cmd=
type = [get_flasctmisc_ioctl: cmd=0x17, buffer size=196
h_type]
get_flaTry 4: vendor id = 0x00C2, device id = 0x00CB
sh_type(): cmd=0MX29LV640D 4Mx16 BotBx17 count=0 len=Flash Type: MX29LV640D 4Mx16 BotB
0
tallest:=====(ctmisc ioctl done...)=====
Get FLASH TYPE is
cmd=
type = [get_pa2gctmisc_ioctl: cmd=0x28, buffer size=196
a0idxval]
get_ddata_init(): base = 0xbc03f6c0
ata(): cmd=0x28 data_init(): location = , mydatas index = 1
count=8 len=24
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA2GA0IDXVAL count is
get_data(): PA2GA0IDXVAL 0:
get_data(): done
cmd=
type = [get_pa2gctmisc_ioctl: cmd=0x2a, buffer size=196
a1idxval]
get_ddata_init(): base = 0xbc03f600
ata(): cmd=0x2a data_init(): location = , mydatas index = 1
count=8 len=24
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA2GA1IDXVAL count is
get_data(): PA2GA1IDXVAL 0: [2 -393 6072 -1505
get_data(): done
2G idx w0a0[-396] w1a0 w2a0[-1397]
Update [-396] to
Update to
Update [-1397] to
2G idx w0a1[-393] w1a1 w2a1[-1505
Update [-393] to
Update to
Update [-1505 to
cmctmisc_ioctl: cmd=0x38, buffer size=196
d=[misc -t get_pdata_init(): base = 0xbc03f4c0
a5gha0idxval -w data_init(): location = , mydatas index = 1
3 ]
type = [getctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): cmd=0x38 count=8 len=24
get_data(): Get PA5GHA0IDXVAL count is
get_data(): PA5GHA0IDXVAL 0: [0 -411 6137 -1475
get_data(): done
cmd=
type = [get_pa5gctmisc_ioctl: cmd=0x3a, buffer size=196
ha1idxval]
get_data_init(): base = 0xbc03f400
data(): cmd=0x3adata_init(): location = , mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GHA1IDXVAL count is
get_data(): PA5GHA1IDXVAL 0: [0 -409 6130 -1475
get_data(): done
5G high idx w0a0[-411] w1a0 w2a0[-1475
Update [-411] to
Update to
Update [-1475 to
5G high idx w0a1[-409] w1a1 w2a1[-1475
Update [-409] to
Update to
Update [-1475 toctmisc_ioctl: cmd=0x48, buffer size=196
cmd=[data_init(): base = 0xbc03f2c0
misc -t get_pa5gdata_init(): location = , mydatas index = 0
la0idxval -w 3 ]ctmisc_ioctl: index=0
type = [get_patallest:=====(ctmisc ioctl done...)=====
5gla0idxval]
get_data(): cmd=0x48 count=8 len=24
get_data(): Get PA5GLA0IDXVAL count is
get_data(): done 这个CFE能中断吗？
页:
[1]