ruikem 发表于 2019-1-9 00:28

思科EA6700TTL一直显示Decompressing...done

思科EA6700TTL一直显示Decompressing...done……。不停下去。按复位按钮后显示自检信息：Found a AMD NAND flash:
Total size:128MB
Block size:128KB
Page Size:   2048B
OOB Size:    64B
Sector size: 512B
Spare size:16B
ECC level:   8-bit
Device ID: 0x01 0xf1 0x00 0x1d 0x01
Corrupt NVRAM found, trying embedded NVRAM next.


CFE version 6.39.163.39 (r394801) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Mon Apr 29 14:39:11 CST 2013 (mike@localhost.localdomain)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
The 1st image start addrchanged, set to 2097152 (was (null))
The 2nd image start addrchanged, set to 32505856 (was (null))
DDR Clock: 400 MHz
Info: DDR frequency set from clkfreq=800,*533*
Warning: invalid DDR setting of 533 MHz ignored. DDR frequency will be set to 400 MHz.
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.39.163.39 (r394801)
CPU type 0x0: 800MHz
Tot mem: 262144 KBytes

CFE mem:    0x00F00000 - 0x0109DF6C (1695596)
Data:       0x00F56650 - 0x00F56B18 (1224)
BSS:      0x00F56B28 - 0x00F9BF6C (283716)
Heap:       0x00F9BF6C - 0x0109BF6C (1048576)
Stack:      0x0109BF6C - 0x0109DF6C (8192)
Text:       0x00F00000 - 0x00F4B224 (307748)
Boot:       0x0109E000 - 0x010DE000
Reloc:      I:00000000 - D:00000000

Boot version: v2.1.10

MTD partition: nflash0.nvram
Erase whole mtd partition!
Erase range: 0x0 - 0x100000
Committing NVRAM...done
Waiting for reset button release...donDecompressing...done
请高手分析问题在哪里？

qfnuzlr 发表于 2019-1-9 07:39

按住reset启动不了？ cfe进不去？

jbzzz 发表于 2019-1-9 08:54

怎么出现的问题

zhjook 发表于 2019-1-9 22:34

你是不是刷了什么固件进去？看上去好像nvram 合并后冲突了，导致异常，你开机进入cfe 模式，然后ttl输入命令nvram erase 清空nvram 重启试试

longalong 发表于 2019-1-21 13:35

我也是遇到同样的问题了

ruikem 发表于 2019-1-24 21:52

问题已经解决了，是CPU坏了，显示信息好象是CPU无法将主频调到533，换了CPU解决了，谢谢大家！
页: [1]
查看完整版本: 思科EA6700TTL一直显示Decompressing...done