求助:极路由1S刷breed
极路由1s刷breed,到putty中输入mtd -r write/tmp/breed-mt7620-hiwifi-hc5761.bin u-boot 的命令后:Usage: mtd [<options> ...] <command> [<arguments> ...] <device>[:<device>...]
The device is in the format of mtdX (eg: mtd4) or its label.
mtd recognizes these commands:
unlock unlock the device
refresh refresh mtd partition
erase erase all data on device
verify <imagefile>|- verify <imagefile> (use - for stdin) to device
write <imagefile>|- write <imagefile> (use - for stdin) to device
jffs2write <file> append <file> to the jffs2 partition on the device
Following options are available:
-q quiet mode (once: no on writing,
twice: no status messages)
-n write without first erasing the blocks
-r reboot after successful command
-f force write without trx checks
-e <device> erase <device> before executing the command
-d <name> directory for jffs2write, defaults to "tmp"
-j <name> integrate <file> into jffs2 data when writing an image
-s <number> skip the first n bytes when appending data to the jffs2 partiton, defaults to "0"
-p write beginning at partition offset
-l <length> the length of data that we want to dump
Example: To write linux.trx to mtd4 labeled as linux and reboot afterwards
mtd -r write linux.trx linux
没有教程中出现的:Robooting......
参考教程: 老路由器的春天!极路由极1S刷入OpenWrt保姆级教程(建议收藏)_哔哩哔哩_bilibili
命令错了,自己看教程。
write后面加空格
jinpan523 发表于 2022-10-17 22:53
write后面加空格
已解决,谢谢! 刷好再加个USB口,又可以废物利用了:lol
页:
[1]