er-x-stp使用猫棒,IPTV设置问题
本帖最后由 trotter 于 2023-5-22 12:37 编辑那位兄弟在EdgeRouter X SFP软路由上使用过猫棒,请教一个IPTV的设置问题,
先交代一下环境,运营商西安电信,电信光猫中的IPTV设置如下图。只有VLAN ID:43,组播VLAN ID为空。
EdgeRouter X SFP 软路由中 eth5 为 SFP 口,接猫棒。eth4 口接 IPTV 机顶盒。
我的配置方法是:
# 设置网桥
set interfaces bridge br0 aging 300
set interfaces bridge br0 bridged-conntrack disable
set interfaces bridge br0 hello-time 2
set interfaces bridge br0 max-age 20
set interfaces bridge br0 priority 32768
set interfaces bridge br0 promiscuous disable
set interfaces bridge br0 stp false
# 在 eth5 上创建 vlan 并加入网桥(西安电信IPTV VLanID 43)
set interfaces ethernet eth5 vif 43 bridge-group bridge br0
set interfaces ethernet eth5 vif 43 description IPTV
# 将eth4口加入网桥
set interfaces ethernet eth4 bridge-group bridge br0
set interfaces ethernet eth4 description 'IPTV'
set interfaces ethernet eth4 duplex auto
set interfaces ethernet eth4 speed auto
这时,iptv机顶盒可以正常登录,同时可以看点播内容(电影/电视剧),在看直播时,播放10几秒后就卡住了。分析原因应该是没有设置组播引起的。那位兄弟有在EdgeRouter软路由上设置IPTV的成功经验,请给我分享一下,谢谢
问题补充:
我分析故障原因应该是出在组播设置方面,我目前没有弄明白igmp snooping应该如何设置。
光猫里组播Vlan设50试试
网络无线爱好者 发表于 2023-5-22 10:09
光猫里组播Vlan设50试试
我用的是猫棒,没有用光猫,另外,我们本地IPTV VLAN的ID是43,没有组播。 俺就是陕西电信当然有组播了。https://www.right.com.cn/forum//mobcent//app/data/phiz/default/03.png
网络无线爱好者 发表于 2023-5-22 10:18
俺就是陕西电信当然有组播了。
啊,我老光猫里没有组播ID啊。 都有组播的好像应用里面,楼主搞成功了吗????
页:
[1]