whiteskin 发表于 2012-7-2 12:19

帮忙看一下这个linksys e3200有什么问题?

买来就不停重启
这是接上TTL后读出来的

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Fri Mar4 11:57:55 HKT 2011 (zhaoguang@sw1)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
This is a Serial Flash
Boot partition size = 262144(0x40000)
Found a 16MB ST compatible serial flash
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.127.28 @VERSION_TYPE@
CPU type 0x19749: 500MHz
Tot mem: 65536 KBytes

CFE mem:    0x80700000 - 0x807A02F0 (656112)
Data:       0x80735600 - 0x80739640 (16448)
BSS:      0x80739640 - 0x8073A2F0 (3248)
Heap:       0x8073A2F0 - 0x8079E2F0 (409600)
Stack:      0x8079E2F0 - 0x807A02F0 (8192)
Text:       0x80700000 - 0x807355F4 (218612)

Boot version: v5.9
The boot is CFE

Flash base: bfc00000, mac start: 3ef00
mac_init(): Find mac in location 0
Nothing...
No country code find

### CLKDIV= 0x20e0842, SFlashClkDiv=2 clkdivsf=2 ###

### Change it to 0x20e0842 (2) ###
Device eth0:hwaddr 58-6D-8F-1D-3A-97, ipaddr 192.168.1.1, mask 255.255.255.0
      gateway not set, nameserver not set
cfe_led_init: start to set power LED and switch LEDs.
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3731948 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22 (root@97026PC) (gcc version 4.2.3) #2 Tue Apr 10 19:05:47 CST 2012
CPU revision is: 00019749
Found a 16MB ST compatible serial flash
wombo_reset set to gpio 23
Determined physical RAM map:
memory: 04000000 @ 00000000 (usable)
Zone PFN ranges:
Normal          0 ->    16384
HighMem   16384 ->    16384
early_node_map active PFN ranges
    0:      0 ->    16384
Built 1 zonelists.Total pages: 16384
Kernel command line: root=/dev/mtdblock2 console=ttyS0,115200 init=/sbin/preinit
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM5357 rev 1 at 500 MHz
Using 250.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 60220k/65536k available (2869k kernel code, 5260k reserved, 563k data, 212k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
PCI: no core
PCI: Fixing up bus 0
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
gpio_init: power pulse time 7
Register DIAG LED in /proc/sys/diag_blink.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
fuse init (API version 7.8)
io scheduler noop registered (default)
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
loop: module loaded
PPP generic driver version 2.4.2
NET: Registered protocol family 24
pflash: found no supported devices
sflash: squash filesystem with lzma found at block 1800
Creating 4 MTD partitions on "sflash":
0x00000000-0x00040000 : "boot"
0x00040000-0x00ff0000 : "linux"
0x001c2154-0x00ff0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x00ff0000-0x01000000 : "nvram"
u32 classifier
nf_conntrack version 0.5.0 (512 buckets, 4096 max)
edward ====to register conntrack protocol helper for esp:
nf_conntrack_rtsp v0.6.21 loading
GRE over IPv4 tunneling driver
nf_nat_rtsp v0.6.21 loading
edward =======nf_nat_proto_esp_init
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 212k freed
Warning: unable to open an initial console.
Failed to execute /init
ctmisc: module license 'unspecified' taints kernel.
Register /dev/ctmisc device, major:10 minor:255
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=







whiteskin 发表于 2012-7-2 12:21

/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
/dev/nvram: No such file or directory
: No more events to be processed, quitting.
: Waiting for children.
: All children terminated.
The boot is CFE
Algorithmics/MIPS FPU Emulator v1.5
/dev/: cannot create
cmd=
ctmisc_ioctl: cmd=0x11, buffer size=196
data_init(): base = 0xbc03ef00
data_init(): location = , mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get MAC count is
get_data(): MAC 0:
get_data(): done
cmd=
ctmisc_ioctl: cmd=0x26, buffer size=196
data_init(): base = 0xbc03fcdc
data_init(): location = , mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get WSC count is
get_data(): WSC 0:
get_data(): done
cmd=
ctmisc_ioctl: cmd=0x15, buffer size=196
data_init(): base = 0xbc03fe30
data_init(): location = , mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get SN count is
get_data(): SN 0:
get_data(): done
cmd=
ctmisc_ioctl: cmd=0x2c, buffer size=196
data_init(): base = 0xbc03fe20
data_init(): location = , mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get COUNTRY count is
get_data(): done
cmd=
ctmisc_ioctl: cmd=0x2e, buffer size=196
data_init(): base = 0xbc03fe10
data_init(): location = , mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get 2G_COUNTRY_CODE count is
get_data(): done
cmd=
ctmisc_ioctl: cmd=0x5e, buffer size=196
data_init(): base = 0xbc03fe00
data_init(): location = , mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get 5G_COUNTRY_CODE count is
get_data(): done
cmd=
ctmisc_ioctl: cmd=0x17, buffer size=196
sflash_init: sflash type 0x100
sflash_init: sflash type 0x17
Flash Type: SFLASH 16384 kB
tallest:=====(ctmisc ioctl done...)=====
Get FLASH TYPE is
cmd=
ctmisc_ioctl: cmd=0x28, buffer size=196
data_init(): base = 0xbc03f6c0
data_init(): location = , mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA2GA0IDXVAL count is
get_data(): PA2GA0IDXVAL 0:
get_data(): done
cmd=[misc -t get_ctmisc_ioctl: cmd=0x2a, buffer size=196
pa2ga1idxval -w data_init(): base = 0xbc03f600
3 ]
data_init(): location = , mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA2GA1IDXVAL count is
get_data(): PA2GA1IDXVAL 0:
get_data(): done
2G idx w0a0[-428] w1a0 wctmisc_ioctl: cmd=0x38, buffer size=196
2a0[-1979]
2G idata_init(): base = 0xbc03f4c0
dx w0a1[-410]data_init(): location = , mydatas index = 1
w1a1 w2a1ctmisc_ioctl: index=1
[-1911]
cmd=[mitallest:=====(ctmisc ioctl done...)=====
sc -t get_pa5gha0idxval -w 3 ]
get_data(): Get PA5GHA0IDXVAL count is
get_data(): PA5GHA0IDXVAL 0:
get_data(): done
ctmisc_ioctl: cmd=0x3a, buffer size=196
cmd=[misc -t getdata_init(): base = 0xbc03f400
_pa5gha1idxval -data_init(): location = , mydatas index = 1
w 3 ]
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GHA1IDXVAL count is
get_data(): PA5GHA1IDXVAL 0:
get_data(): done
5G high idx w0a0[-323] w1a0[6ctmisc_ioctl: cmd=0x3c, buffer size=196
175] w2a0[-1379]data_init(): base = 0xbc03f980

5G high idxdata_init(): location = , mydatas index = 0
w0a1[-327] w1a1ctmisc_ioctl: index=0
w2a1[-137tallest:=====(ctmisc ioctl done...)=====
2]
cmd=
get_data(): Get PA5GHA2IDXVAL count is
get_data(): done
Using default 5G high PA2 value
cmd=[mctmisc_ioctl: cmd=0x48, buffer size=196
isc -t get_pa5gldata_init(): base = 0xbc03f2c0
data_init(): location = , mydatas index = 0

ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GLA0IDXVAL count is
get_data(): done
cmd=
ctmisc_ioctl: cmd=0x4a, buffer size=196
data_init(): base = 0xbc03f200
data_init(): location = , mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GLA1IDXVAL count is
get_data(): done
Using default 5G low PA0 value
Using default 5G low PA1 value
cmd=[misc -t get_pctmisc_ioctl: cmd=0x4c, buffer size=196
a5gla2idxval -w data_init(): base = 0xbc03f8c0
3 ]
data_init(): location = , mydatas index = 0
ctmisc_ioctl: index=0
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GLA2IDXVAL count is
get_data(): done
Using default 5G low PA2 value
cmd=
ctmisc_ioctl: cmd=0x58, buffer size=196
data_init(): base = 0xbc03f0c0
data_init(): location = , mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GA0IDXVAL count is
get_data(): PA5GA0IDXVAL 0:
get_data(): done
cmd=[misc -t get_pctmisc_ioctl: cmd=0x5a, buffer size=196
a5ga1idxval -w 3data_init(): base = 0xbc03f000
]
data_init(): location = , mydatas index = 1
ctmisc_ioctl: index=1
tallest:=====(ctmisc ioctl done...)=====
get_data(): Get PA5GA1IDXVAL count is
get_data(): PA5GA1IDXVAL 0:
get_data(): done
5G middle idx w0a0[-381] w1a0[6ctmisc_ioctl: cmd=0x5c, buffer size=196
478] w2a0[-1507]data_init(): base = 0xbc03f800

5G middle idx, mydatas index = 0
7] w0a1[-374] w1ctmisc_ioctl: index=0
a1 w2a1[-1tallest:=====(ctmisc ioctl done...)=====
519]
cmd=
get_data(): Get PA5GA2IDXVAL count is
get_data(): done
Using default 5G middle PA2 value
Cannot find lang from /proc/mtd
ret = -1
www -> /www
mount: No such file or directory
cmd=
cmd=
cmd=
cmd=
Needed modules: et wl ip6t_frag ip6t_ipv6header ip6t_ipv6range
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=
cmd=

whiteskin 发表于 2012-7-2 12:21

eth2: No such device
wl0 not up in 3 sec
cmd=
cmd=
cmd=
cmd=
cmd=
Failed trying to open `/proc/mdstat': No such file or directory
Failed trying to open `/proc/sestat': No such file or directory
Failed trying to open `/proc/mdstat': No such file or directory
Failed trying to open `/proc/sestat': No such file or directory
Hit enter to continue...The chipset is 47186 with a 53125 gigabit switch

: Obtained SIGINT, quitting.
: Waiting for children.
: All children terminated.
: Obtained SIGINT, quitting.
: Waiting for children.
: All children terminated.
: Obtained SIGINT, quitting.
: Waiting for children.
: All children terminated.
: Obtained SIGINT, quitting.
: Waiting for children.
: All children terminated.
: Obtained SIGINT, quitting.
: Waiting for children.
: All children terminated.
: Obtained SIGINT, quitting.
: Waiting for children.
: All children terminated.
cmd=
killall: httpd: no process killed
waitpid: No child processes
killall: check_http.sh: no process killed
cmd=
killall: gn-httpd: no process killed

cmd=
killall: gn-httpd: no process killed
waitpid: No child processes
cmd=
killall: wm-httpd: no process killed
waitpid: No child processes
cmd=
cmd=
waitpid: No child processes
cmd=
cmd=
cmd=
waitpid: No child processes
cmd=
waitpid: No child processes
cmd=
waitpid: No child processes
cmd=
waitpid: No child processes
cmd=
waitpid: No child processes
cmd=
waitpid: No child processes
cmd=
waitpid: No child processes
cmd=
waitpid: No child processes
cmd=
cmd=
waitpid: No child processes
cmd=
waitpid: No child processes
cmd=
waitpid: No child processes
cmd=
cmd=
waitpid: No child processes
cmd=
waitpid: No child processes
cmd=
waitpid: No child processes
cmd=
waitpid: No child processes
cmd=
cmd=
waitpid: No child processes
cmd=
expect on/off for argument
waitpid: No child processes
cmd=
waitpid: No child processes
br0: No child processes
cmd=
vlan1: Operation not supported
Write wireless mac successfully
cmd=
br0: No child processes
cmd=
eth1: Operation not supported
eth1: Operation not permitted
interface eth1: channel selected 1 (renew)
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Operation not supported
eth1: Invalid argument
eth1: Invalid argument
eth1: Operation not supported
cmd=
device eth1 is already a member of a bridge; can't enslave it to bridge br0.
waitpid: No child processes
Write wireless mac fail : : No such device
cmd=
interface eth2 does not exist!
eth2: No such device
cmd=
interface eth3 does not exist!
eth3: No such device
Set 1 to /proc/sys/net/ipv6/conf/br0/forwarding ...
wl: wl driver adapKernel panic - not syncing: Attempted to kill init!
ter not found
URebooting in 3 seconds..pdate [-428] to
Update to
Update [-1979] to
Update [-410] to
Update to
Update [-1911] to
Update [-323] to
Update to
Update [-1379] to
Update [-327] to
Update to
Update [-1372] to
Update [-381] to
Update to
Update [-1507] to
Update [-374] to
Update to
Update [-1519] to
Restoring Storage Nvram Defaults
signalling STOP

Make date==>Year:12,Month:4,Day:10
Firmware version =>v1.0.04
signalling STOP
signalling STOP
signalling STOP
sum3=10679296 garbage=992 n=1024
MD5=
signalling STOP
WARNING: console log level set to 1
name= lan_ifname=
name= lan_ifname=
name= lan_ifname=
name= lan_ifname=
Please stand by while rebooting the system...

whiteskin 发表于 2012-7-2 12:22

就是这样, 不断的重启.

明明73 发表于 2012-7-2 13:13

固件问题

whiteskin 发表于 2012-7-2 16:02

本帖最后由 whiteskin 于 2012-7-3 15:07 编辑

可以在CFE下进行upgrade code.bin,然后TFTP,刷入了官方1.04固件. 显示也是成功的. 成功刷完, 重启机器后, 还是不停的自动重启
刷了1.03也不行
CFE> upgrade code.bin
Reading :: CODE Pattern is CORRECT!
upgrade_ver upgrade_ver 4712_ver
Done. 10679296 bytes read
fname=flash1.trx
CODE Pattern is correct! (3200)
Programming...done. 10679264 bytes written
Upgrade successfully ...
*** command status = 0
CFE>

CFE下"nvram erase"也不行


whiteskin 发表于 2012-7-3 15:27

本帖最后由 whiteskin 于 2012-7-3 15:28 编辑

附上nvram里的信息. 不知道是不是有问题才造成的重启.

whiteskin 发表于 2012-7-22 13:03

刷了tomato的固件, 倒是不重启了. 可以用.
重新刷回官方, 继续不停重启.但tomato不支持5G呀

ink 发表于 2012-7-22 23:48

买来就这样的话,赶紧找商家啊,不要自己拆开搞.

TOMATO下OK,DD和原厂下有问题的话,会不会就是5G的模块出了问题

那个男人 发表于 2015-4-25 14:05

ink 发表于 2012-7-22 23:48
买来就这样的话,赶紧找商家啊,不要自己拆开搞.

TOMATO下OK,DD和原厂下有问题的话,会不会就是5G的模块出 ...

估计是射频线路有问题估计是短路了我有一台天热就这样了
页: [1]
查看完整版本: 帮忙看一下这个linksys e3200有什么问题?