zgxwc 发表于 2019-12-23 16:50
支持无线蛮好的，还是喜欢原版界面。如何更改原版界面和修改主角名OpenWrt ？
通通都在系统里面设
wulishui 发表于 2019-12-23 20:49
通通都在系统里面设
谢谢！已更换主题了！！！:)
那个男人 发表于 2019-12-22 21:27
显示问题就是小问题不要cpu满载就好 cpu温度是负的-1到-2来回跳
这个启动问题有解决办法吗 ...
你设过了usb选项没？
wulishui 发表于 2019-12-24 00:32 static/image/common/back.gif
你设过了usb选项没？
设置过 BIOS还原过也不行
那个男人 发表于 2019-12-24 09:08
设置过 BIOS还原过也不行
24号的降级了驱动，你试试
wulishui 发表于 2019-12-24 10:37 static/image/common/back.gif
24号的降级了驱动，你试试
好的 我晚上回去刷一下
刚刷上 还是一样卡在ehci pei那里
[ 0.000000] Linux version 4.14.151 (wulishui@wulishui) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7897-9d401013fc)) #0 SMP Tue Nov 5 14:12:18 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=53f1f007-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: usable
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: usable
[ 0.000000] BIOS-e820: ACPI NVS
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: ACPI data
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: ACPI NVS
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: ACPI NVS
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: ACPI NVS
[ 0.000000] BIOS-e820: usable
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: usable
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: reserved
[ 0.000000] BIOS-e820: reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI:/, BIOS 4.6.4 08/04/2014
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update usable ==> reserved
[ 0.000000] e820: remove usable
[ 0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86/PAT: Configuration : WBWCUC- UCWBWPUC- WT
[ 0.000000] found SMP MP-table at
[ 0.000000] Base memory trampoline at 98000 size 24576
[ 0.000000] BRK PGTABLE
[ 0.000000] BRK PGTABLE
[ 0.000000] BRK PGTABLE
[ 0.000000] BRK PGTABLE
[ 0.000000] BRK PGTABLE
[ 0.000000] BRK PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000007F3DF068 00004C (v01 ALASKA A M I 01072009 AMI00010013)
[ 0.000000] ACPI: FACP 0x000000007F3E5F48 0000F4 (v04 ALASKA A M I 01072009 AMI00010013)
[ 0.000000] ACPI: DSDT 0x000000007F3DF140 006E06 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000007F423F80 000040
[ 0.000000] ACPI: APIC 0x000000007F3E6040 000072 (v03 ALASKA A M I 01072009 AMI00010013)
[ 0.000000] ACPI: MCFG 0x000000007F3E60B8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000007F3E60F8 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: SSDT 0x000000007F3E6130 000655 (v01 PmRefCpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA
[ 0.000000] DMA32
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0:
[ 0.000000] node 0:
[ 0.000000] node 0:
[ 0.000000] node 0:
[ 0.000000] Initmem setup node 0
[ 0.000000] On node 0 totalpages: 521384
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8092 pages used for memmap
[ 0.000000] DMA32 zone: 517387 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id high edge lint)
[ 0.000000] IOAPIC: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] e820: available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x82/0x547 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 41 pages/cpu s127832 r8192 d31912 u524288
[ 0.000000] pcpu-alloc: s127832 r8192 d31912 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on.Total pages: 513207
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=53f1f007-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2030372K/2085536K available (10248K kernel code, 534K rwdata, 2376K rodata, 1080K init, 400K bss, 55164K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console enabled
[ 0.000000] console enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.010000] tsc: Detected 1862.094 MHz processor
[ 0.020000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.18 BogoMIPS (lpj=18620940)
[ 0.020000] pid_max: default: 32768 minimum: 301
[ 0.020000] ACPI: Core revision 20170728
[ 0.047909] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.048495] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.048949] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.050115] Disabled fast string operations
[ 0.050465] mce: CPU supports 5 MCE banks
[ 0.050784] CPU0: Thermal monitoring enabled (TM2)
[ 0.051127] process: using mwait in idle threads
[ 0.051469] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.051835] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.052584] Freeing SMP alternatives memory: 28K
[ 0.057413] smpboot: Max logical packages: 2
[ 0.058377] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.278839] smpboot: CPU0: Genuine Intel(R) CPU @ 1.86GHz (family: 0x6, model: 0x36, stepping: 0x1)
[ 0.280000] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[ 0.280000] ... version: 3
[ 0.280000] ... bit width: 40
[ 0.280000] ... generic registers: 2
[ 0.280000] ... value mask: 000000ffffffffff
[ 0.280000] ... max period: 000000007fffffff
[ 0.280000] ... fixed-purpose events: 3
[ 0.280000] ... event mask: 0000000700000003
[ 0.280000] Hierarchical SRCU implementation.
[ 0.280000] smp: Bringing up secondary CPUs ...
[ 0.280000] x86: Booting SMP configuration:
[ 0.280000] .... node#0, CPUs: #1
[ 0.010000] Disabled fast string operations
[ 0.280000] TSC synchronization :
[ 0.280000] Measured 8428 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.280000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.280216] smp: Brought up 1 node, 2 CPUs
[ 0.280542] smpboot: Total of 2 processors activated (7448.37 BogoMIPS)
[ 0.283330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.284018] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.284561] pinctrl core: initialized pinctrl subsystem
[ 0.285848] NET: Registered protocol family 16
[ 0.288918] cpuidle: using governor ladder
[ 0.290440] ACPI: bus type PCI registered
[ 0.290769] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.291558] PCI: Using configuration type 1 for base access
[ 0.336982] ACPI: Added _OSI(Module Device)
[ 0.337333] ACPI: Added _OSI(Processor Device)
[ 0.337660] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.337994] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.338946] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.353445] ACPI: : BIOS _OSI(Linux) query ignored
[ 0.356135] ACPI: Dynamic OEM Table Load:
[ 0.356479] ACPI: SSDT 0xFFFF88807BE70400 0002A7 (v01 PmRefCpu0Ist00003000 INTL 20051117)
[ 0.358344] ACPI: Dynamic OEM Table Load:
[ 0.358692] ACPI: SSDT 0xFFFF88807C7E0800 0006D5 (v01 PmRefCpu0Cst00003001 INTL 20051117)
[ 0.362534] ACPI: Dynamic OEM Table Load:
[ 0.362880] ACPI: SSDT 0xFFFF88807C5CF600 0001CF (v01 PmRefApIst 00003000 INTL 20051117)
[ 0.364206] ACPI: Dynamic OEM Table Load:
[ 0.364206] ACPI: SSDT 0xFFFF88807BD51480 00008D (v01 PmRefApCst 00003000 INTL 20051117)
[ 0.368272] ACPI: Interpreter enabled
[ 0.368623] ACPI: (supports S0 S5)
[ 0.368905] ACPI: Using IOAPIC for interrupt routing
[ 0.369492] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.371649] ACPI: Enabled 14 GPEs in block 00 to 1F
[ 0.435454] ACPI: Power Resource (off)
[ 0.440969] ACPI: PCI Root Bridge (domain 0000 )
[ 0.441428] acpi PNP0A08:00: _OSC: OS supports
[ 0.442105] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.443938] PCI host bridge to bus 0000:00
[ 0.444275] pci_bus 0000:00: root bus resource
[ 0.444706] pci_bus 0000:00: root bus resource
[ 0.445135] pci_bus 0000:00: root bus resource
[ 0.445651] pci_bus 0000:00: root bus resource
[ 0.446167] pci_bus 0000:00: root bus resource
[ 0.446682] pci_bus 0000:00: root bus resource
[ 0.447198] pci_bus 0000:00: root bus resource
[ 0.447715] pci_bus 0000:00: root bus resource
[ 0.448233] pci_bus 0000:00: root bus resource
[ 0.450034] pci 0000:00:00.0: type 00 class 0x060000
[ 0.450600] pci 0000:00:02.0: type 00 class 0x030000
[ 0.450658] pci 0000:00:02.0: reg 0x10:
[ 0.450685] pci 0000:00:02.0: reg 0x14:
[ 0.451390] pci 0000:00:1b.0: type 00 class 0x040300
[ 0.451467] pci 0000:00:1b.0: reg 0x10:
[ 0.451696] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.452222] pci 0000:00:1c.0: type 01 class 0x060400
[ 0.452497] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.453042] pci 0000:00:1c.1: type 01 class 0x060400
[ 0.453312] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.453869] pci 0000:00:1c.2: type 01 class 0x060400
[ 0.454147] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.454696] pci 0000:00:1c.3: type 01 class 0x060400
[ 0.454972] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.455520] pci 0000:00:1d.0: type 00 class 0x0c0300
[ 0.455672] pci 0000:00:1d.0: reg 0x20:
[ 0.456273] pci 0000:00:1d.1: type 00 class 0x0c0300
[ 0.456428] pci 0000:00:1d.1: reg 0x20:
[ 0.457028] pci 0000:00:1d.2: type 00 class 0x0c0300
[ 0.457179] pci 0000:00:1d.2: reg 0x20:
[ 0.457785] pci 0000:00:1d.3: type 00 class 0x0c0300
[ 0.457932] pci 0000:00:1d.3: reg 0x20:
[ 0.458550] pci 0000:00:1d.7: type 00 class 0x0c0320
[ 0.458639] pci 0000:00:1d.7: reg 0x10:
[ 0.458882] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.459391] pci 0000:00:1e.0: type 01 class 0x060401
[ 0.460140] pci 0000:00:1f.0: type 00 class 0x060100
[ 0.460896] pci 0000:00:1f.2: type 00 class 0x010601
[ 0.460977] pci 0000:00:1f.2: reg 0x10:
[ 0.461017] pci 0000:00:1f.2: reg 0x14:
[ 0.461052] pci 0000:00:1f.2: reg 0x18:
[ 0.461085] pci 0000:00:1f.2: reg 0x1c:
[ 0.461119] pci 0000:00:1f.2: reg 0x20:
[ 0.461154] pci 0000:00:1f.2: reg 0x24:
[ 0.461300] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.461807] pci 0000:00:1f.3: type 00 class 0x0c0500
[ 0.461961] pci 0000:00:1f.3: reg 0x20:
[ 0.462919] pci 0000:01:00.0: type 00 class 0x028000
[ 0.463002] pci 0000:01:00.0: reg 0x10:
[ 0.463100] pci 0000:01:00.0: reg 0x30:
[ 0.463258] pci 0000:01:00.0: supports D1 D2
[ 0.463267] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.463608] pci 0000:00:1c.0: PCI bridge to
[ 0.464024] pci 0000:00:1c.0: bridge window
[ 0.464404] pci 0000:02:00.0: type 00 class 0x020000
[ 0.464471] pci 0000:02:00.0: reg 0x10:
[ 0.464531] pci 0000:02:00.0: reg 0x18:
[ 0.464569] pci 0000:02:00.0: reg 0x20:
[ 0.464758] pci 0000:02:00.0: supports D1 D2
[ 0.464767] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.465105] pci 0000:00:1c.1: PCI bridge to
[ 0.465501] pci 0000:00:1c.1: bridge window
[ 0.465517] pci 0000:00:1c.1: bridge window
[ 0.465890] pci 0000:03:00.0: type 00 class 0x020000
[ 0.465956] pci 0000:03:00.0: reg 0x10:
[ 0.466013] pci 0000:03:00.0: reg 0x18:
[ 0.466050] pci 0000:03:00.0: reg 0x20:
[ 0.466240] pci 0000:03:00.0: supports D1 D2
[ 0.466249] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.466593] pci 0000:00:1c.2: PCI bridge to
[ 0.467003] pci 0000:00:1c.2: bridge window
[ 0.467019] pci 0000:00:1c.2: bridge window
[ 0.467392] pci 0000:00:1c.3: PCI bridge to
[ 0.468130] pci 0000:00:1e.0: PCI bridge to (subtractive decode)
[ 0.468622] pci 0000:00:1e.0: bridge window (subtractive decode)
[ 0.468632] pci 0000:00:1e.0: bridge window (subtractive decode)
[ 0.468641] pci 0000:00:1e.0: bridge window (subtractive decode)
[ 0.468650] pci 0000:00:1e.0: bridge window (subtractive decode)
[ 0.468659] pci 0000:00:1e.0: bridge window (subtractive decode)
[ 0.468668] pci 0000:00:1e.0: bridge window (subtractive decode)
[ 0.468677] pci 0000:00:1e.0: bridge window (subtractive decode)
[ 0.468686] pci 0000:00:1e.0: bridge window (subtractive decode)
[ 0.468769] pci_bus 0000:00: on NUMA node 0
[ 0.473442] ACPI: PCI Interrupt Link (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.474355] ACPI: PCI Interrupt Link (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.475181] ACPI: PCI Interrupt Link (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.476009] ACPI: PCI Interrupt Link (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.476841] ACPI: PCI Interrupt Link (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.477777] ACPI: PCI Interrupt Link (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.478716] ACPI: PCI Interrupt Link (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.479539] ACPI: PCI Interrupt Link (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 0.484545] SCSI subsystem initialized
[ 0.485585] libata version 3.00 loaded.
[ 0.485638] ACPI: bus type USB registered
[ 0.486287] usbcore: registered new interface driver usbfs
[ 0.486818] usbcore: registered new interface driver hub
[ 0.487340] usbcore: registered new device driver usb
[ 0.488404] PCI: Using ACPI for IRQ routing
[ 0.488789] PCI: pci_cache_line_size set to 64 bytes
[ 0.488982] e820: reserve RAM buffer
[ 0.488997] e820: reserve RAM buffer
[ 0.489011] e820: reserve RAM buffer
[ 0.489020] e820: reserve RAM buffer
[ 0.491390] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.491856] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.492214] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.494821] clocksource: Switched to clocksource hpet
[ 0.495576] pnp: PnP ACPI init
[ 0.496897] system 00:00: has been reserved
[ 0.497428] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.497942] system 00:01: has been reserved
[ 0.498386] system 00:01: has been reserved
[ 0.498758] system 00:01: has been reserved
[ 0.499123] system 00:01: has been reserved
[ 0.499489] system 00:01: has been reserved
[ 0.499895] system 00:01: has been reserved
[ 0.499895] system 00:01: has been reserved
[ 0.499895] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.499937] system 00:02: has been reserved
[ 0.499937] system 00:02: has been reserved
[ 0.499937] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.499937] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.499937] system 00:04: has been reserved
[ 0.499937] system 00:04: has been reserved
[ 0.499937] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.500411] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.500981] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.502348] pnp 00:07:
[ 0.502613] pnp 00:07: Plug and Play ACPI device, IDs FIT0002 (active)
[ 0.503236] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.505626] system 00:09: has been reserved
[ 0.506127] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.506984] system 00:0a: has been reserved
[ 0.507455] system 00:0a: could not be reserved
[ 0.507897] system 00:0a: could not be reserved
[ 0.508334] system 00:0a: could not be reserved
[ 0.508775] system 00:0a: has been reserved
[ 0.509265] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.510852] system 00:0b: has been reserved
[ 0.511326] system 00:0b: has been reserved
[ 0.511821] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.512938] system 00:0c: has been reserved
[ 0.513384] system 00:0c: has been reserved
[ 0.513786] system 00:0c: could not be reserved
[ 0.514225] system 00:0c: has been reserved
[ 0.514648] system 00:0c: has been reserved
[ 0.515070] system 00:0c: could not be reserved
[ 0.515508] system 00:0c: has been reserved
[ 0.515994] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.516023] pnp: PnP ACPI: found 13 devices
[ 0.535166] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.535816] pci 0000:00:1c.0: bridge window to add_size 1000
[ 0.535833] pci 0000:00:1c.0: bridge window to add_size 200000 add_align 100000
[ 0.535864] pci 0000:00:1c.1: bridge window to add_size 200000 add_align 100000
[ 0.535894] pci 0000:00:1c.2: bridge window to add_size 200000 add_align 100000
[ 0.535921] pci 0000:00:1c.3: bridge window to add_size 1000
[ 0.535933] pci 0000:00:1c.3: bridge window to add_size 200000 add_align 100000
[ 0.535945] pci 0000:00:1c.3: bridge window to add_size 200000 add_align 100000
[ 0.536027] pci 0000:00:1c.0: BAR 9: assigned
[ 0.536592] pci 0000:00:1c.1: BAR 9: assigned
[ 0.537142] pci 0000:00:1c.2: BAR 9: assigned
[ 0.537677] pci 0000:00:1c.3: BAR 8: assigned
[ 0.538126] pci 0000:00:1c.3: BAR 9: assigned
[ 0.538663] pci 0000:00:1c.0: BAR 7: assigned
[ 0.539067] pci 0000:00:1c.3: BAR 7: assigned
[ 0.539476] pci 0000:00:1c.0: PCI bridge to
[ 0.539830] pci 0000:00:1c.0: bridge window
[ 0.540351] pci 0000:00:1c.0: bridge window
[ 0.540867] pci 0000:00:1c.0: bridge window
[ 0.541502] pci 0000:00:1c.1: PCI bridge to
[ 0.541924] pci 0000:00:1c.1: bridge window
[ 0.542407] pci 0000:00:1c.1: bridge window
[ 0.542922] pci 0000:00:1c.1: bridge window
[ 0.543551] pci 0000:00:1c.2: PCI bridge to
[ 0.543972] pci 0000:00:1c.2: bridge window
[ 0.544462] pci 0000:00:1c.2: bridge window
[ 0.544958] pci 0000:00:1c.2: bridge window
[ 0.545506] pci 0000:00:1c.3: PCI bridge to
[ 0.545860] pci 0000:00:1c.3: bridge window
[ 0.546265] pci 0000:00:1c.3: bridge window
[ 0.546699] pci 0000:00:1c.3: bridge window
[ 0.547242] pci 0000:00:1e.0: PCI bridge to
[ 0.547620] pci_bus 0000:00: resource 4
[ 0.547630] pci_bus 0000:00: resource 5
[ 0.547639] pci_bus 0000:00: resource 6
[ 0.547649] pci_bus 0000:00: resource 7
[ 0.547657] pci_bus 0000:00: resource 8
[ 0.547666] pci_bus 0000:00: resource 9
[ 0.547676] pci_bus 0000:00: resource 10
[ 0.547685] pci_bus 0000:00: resource 11
[ 0.547695] pci_bus 0000:01: resource 0
[ 0.547703] pci_bus 0000:01: resource 1
[ 0.547713] pci_bus 0000:01: resource 2
[ 0.547723] pci_bus 0000:02: resource 0
[ 0.547731] pci_bus 0000:02: resource 1
[ 0.547740] pci_bus 0000:02: resource 2
[ 0.547750] pci_bus 0000:03: resource 0
[ 0.547758] pci_bus 0000:03: resource 1
[ 0.547767] pci_bus 0000:03: resource 2
[ 0.547777] pci_bus 0000:04: resource 0
[ 0.547785] pci_bus 0000:04: resource 1
[ 0.547794] pci_bus 0000:04: resource 2
[ 0.547804] pci_bus 0000:05: resource 4
[ 0.547813] pci_bus 0000:05: resource 5
[ 0.547822] pci_bus 0000:05: resource 6
[ 0.547831] pci_bus 0000:05: resource 7
[ 0.547839] pci_bus 0000:05: resource 8
[ 0.547848] pci_bus 0000:05: resource 9
[ 0.547857] pci_bus 0000:05: resource 10
[ 0.547866] pci_bus 0000:05: resource 11
[ 0.548318] NET: Registered protocol family 2
[ 0.549302] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.550105] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.550857] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.551497] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.551963] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.552656] NET: Registered protocol family 1
[ 0.553521] RPC: Registered named UNIX socket transport module.
[ 0.553925] RPC: Registered udp transport module.
[ 0.554257] RPC: Registered tcp transport module.
[ 0.554589] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.555041] pci 0000:00:02.0: Video device with shadowed ROM at
[ 0.590674] PCI: CLS 64 bytes, default 64
[ 0.591440] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35ae96fd359, max_idle_ns: 881590653847 ns
[ 0.597899] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[ 0.611735] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.612184] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.619658] io scheduler noop registered
[ 0.619992] io scheduler deadline registered (default)
[ 0.621042] gpio_it87: no device
[ 0.624522] hv_vmbus: registering driver hv_pci
[ 0.625023] hv_vmbus: registering driver hyperv_fb
[ 0.625500] intel_idle: MWAIT substates: 0x20220
[ 0.625509] intel_idle: v0.4.1 model 0x36
[ 0.626026] intel_idle: lapic_timer_reliable_states 0x2
[ 0.626812] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.627527] ACPI: Power Button
[ 0.628222] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.628876] ACPI: Sleep Button
[ 0.629569] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.630583] ACPI: Power Button
[ 0.634903] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.636289] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.636686] ACPI: Thermal Zone (25 C)
[ 0.638007] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.638404] ACPI: Thermal Zone (27 C)
[ 0.641187] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.641583] ACPI: Thermal Zone (27 C)
[ 0.642988] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.646712] Non-volatile memory driver v1.3
[ 0.655760] loop: module loaded
[ 0.656485] Guest personality initialized and is inactive
[ 0.657040] VMCI host device registered (name=vmci, major=10, minor=63)
[ 0.657498] Initialized host personality
[ 0.658353] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[ 0.659345] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20170728/utaddress-247)
[ 0.660368] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[ 0.661319] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170728/utaddress-247)
[ 0.662259] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.662896] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[ 0.663831] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[ 0.664766] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.665395] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[ 0.666330] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20170728/utaddress-247)
[ 0.667262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.667891] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.668878] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.669480] hv_vmbus: registering driver hv_storvsc
[ 0.671496] ahci 0000:00:1f.2: version 3.0
[ 0.672200] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.672718] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.673266] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
[ 0.677590] scsi host0: ahci
[ 0.678707] scsi host1: ahci
[ 0.679811] scsi host2: ahci
[ 0.681251] scsi host3: ahci
[ 0.681970] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[ 0.683900] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[ 0.684413] ata3: DUMMY
[ 0.684649] ata4: DUMMY
[ 0.685690] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[ 0.686217] hv_vmbus: registering driver hv_netvsc
[ 0.686565] Fusion MPT base driver 3.04.20
[ 0.686871] Copyright (c) 1999-2008 LSI Corporation
[ 0.687235] Fusion MPT SPI Host driver 3.04.20
[ 0.687668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.688092] ehci-pci: EHCI PCI platform driver
[ 0.688939] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.689342] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.689895] ehci-pci 0000:00:1d.7: debug port 1
[ 0.694336] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.694409] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[ 0.720127] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.721791] hub 1-0:1.0: USB hub found
[ 0.722225] hub 1-0:1.0: 8 ports detected
[ 0.724483] ehci-platform: EHCI generic platform driver
[ 0.725001] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.725461] ohci-pci: OHCI PCI platform driver
[ 0.725927] ohci-platform: OHCI generic platform driver
[ 0.726429] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.727276] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.727681] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.728269] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f0a0
[ 0.729926] hub 2-0:1.0: USB hub found
[ 0.730584] hub 2-0:1.0: 2 ports detected
[ 0.732366] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.732775] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.733401] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f080
[ 0.735031] hub 3-0:1.0: USB hub found
[ 0.735458] hub 3-0:1.0: 2 ports detected
[ 0.737271] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.737678] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.738304] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f060
[ 0.739878] hub 4-0:1.0: USB hub found
[ 0.740394] hub 4-0:1.0: 2 ports detected
[ 0.742198] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.742610] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.743236] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f040
[ 0.744840] hub 5-0:1.0: USB hub found
[ 0.745257] hub 5-0:1.0: 2 ports detected
[ 0.747112] usbcore: registered new interface driver cdc_acm
[ 0.747539] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.748227] usbcore: registered new interface driver usblp
[ 0.748776] usbcore: registered new interface driver cdc_wdm
[ 0.749423] usbcore: registered new interface driver usb-storage
[ 0.749974] usbcore: registered new interface driver ums-jumpshot
[ 0.750666] usbcore: registered new interface driver ums-realtek
[ 0.751631] i8042: PNP: PS/2 Controller at 0x60,0x64 irq 1,12
[ 0.753161] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.753561] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.754063] hv_vmbus: registering driver hyperv_keyboard
[ 0.754722] rtc_cmos 00:03: RTC can wake from S4
[ 0.755475] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.756005] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.758753] sdhci: Secure Digital Host Controller Interface driver
[ 0.759221] sdhci: Copyright(c) Pierre Ossman
[ 0.760177] usbcore: registered new interface driver ushc
[ 0.762244] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.762793] hv_vmbus: registering driver hid_hyperv
[ 0.763328] usbcore: registered new interface driver usbhid
[ 0.763741] usbhid: USB HID core driver
[ 0.764076] hv_utils: Registering HyperV Utility Driver
[ 0.764435] hv_vmbus: registering driver hv_util
[ 0.764764] hv_vmbus: registering driver hv_balloon
[ 0.766486] NET: Registered protocol family 10
[ 0.768136] Segment Routing with IPv6
[ 0.768563] NET: Registered protocol family 17
[ 0.768965] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.769728] 8021q: 802.1Q VLAN Support v1.8
[ 0.770601] NET: Registered protocol family 40
[ 0.772452] microcode: sig=0x30661, pf=0x1, revision=0x10d
[ 0.773058] microcode: Microcode Update Driver: v2.2.
[ 0.773972] registered taskstats version 1
[ 0.775836] rtc_cmos 00:03: setting system clock to 2019-12-24 06:00:17 UTC (1577167217)
[ 1.022793] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.090123] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.292086] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 1.293109] scsi host4: usb-storage 1-1:1.0
[ 1.352531] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.353256] Waiting for root device PARTUUID=53f1f007-02...
[ 1.900116] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 2.054178] random: fast init done
[ 2.126190] usb 3-1: string descriptor 0 read error: -22
[ 2.321006] scsi 4:0:0:0: Direct-Access CBM2090SLC 5.00 PQ: 0 ANSI: 2
[ 2.323849] sd 4:0:0:0: 216832 512-byte logical blocks: (111 MB/106 MiB)
[ 2.325205] sd 4:0:0:0: Write Protect is off
[ 2.325560] sd 4:0:0:0: Mode Sense: 0b 00 00 08
[ 2.326328] sd 4:0:0:0: No Caching mode page found
[ 2.326704] sd 4:0:0:0: Assuming drive cache: write through
[ 2.331745]sda: sda1 sda2
[ 2.332184] sda: p2 size 1802240 extends beyond EOD, enabling native capacity
[ 2.336118]sda: sda1 sda2
[ 2.336540] sda: p2 size 1802240 extends beyond EOD, truncated
[ 2.341094] sd 4:0:0:0: Attached SCSI removable disk
[ 2.370911] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[ 2.376749] Freeing unused kernel memory: 1080K
[ 2.420408] Write protecting the kernel read-only data: 16384k
[ 2.424451] Freeing unused kernel memory: 2024K
[ 2.454638] Freeing unused kernel memory: 1720K
[ 2.971370] init: Console is alive
[ 6.874352] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 6.962048] pps_core: LinuxPPS API ver. 1 registered
[ 6.962455] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 6.964730] PTP clock support registered
[ 6.974814] Button Hotplug driver version 0.4.1
[ 6.977720] exFAT: Version 1.2.9
[ 6.987047] SGI XFS with security attributes, no debug enabled
[ 7.011610] usbcore: registered new interface driver uas
[ 7.012355] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 7.014673] init: - preinit -
[ 7.932781] random: crng init done
[ 11.448772] mount_root: loading kmods from internal overlay
[ 11.521471] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 11.532178] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 11.828748] block: attempting to load /etc/config/fstab
[ 11.831946] block: unable to load configuration (fstab: Entry not found)
[ 11.832494] block: no usable configuration
[ 11.953405] mount_root: rootdisk overlay filesystem has not been formatted yet
[ 12.600821] print_req_error: I/O error, dev loop0, sector 0
[ 12.958149] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 12.997452] block: attempting to load /etc/config/fstab
[ 12.997972] block: unable to load configuration (fstab: Entry not found)
[ 12.998552] block: no usable configuration
[ 13.000203] mount_root: overlay filesystem has not been fully initialized yet
[ 13.003569] mount_root: switching to ext4 overlay
[ 13.193873] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 13.215492] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 13.233080] procd: - early -
[ 14.012507] procd: - ubus -
[ 14.160373] print_req_error: I/O error, dev loop0, sector 282
[ 14.390383] print_req_error: I/O error, dev loop0, sector 630
[ 14.395489] procd: - init -
[ 14.647879] print_req_error: I/O error, dev loop0, sector 978
[ 14.922170] kmodloader: loading kernel modules from /etc/modules.d/*
[ 15.005720] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 15.005720] originally by Donald Becker <becker@scyld.com>
[ 15.005720] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 15.020776] FS-Cache: Loaded
[ 15.025141] NET: Registered protocol family 8
[ 15.025524] NET: Registered protocol family 20
[ 15.030280] Key type dns_resolver registered
[ 15.227675] NET: Registered protocol family 33
[ 15.228020] Key type rxrpc registered
[ 15.228310] Key type rxrpc_s registered
[ 15.232449] kAFS: Red Hat AFS client v0.1 registering.
[ 15.232976] FS-Cache: Netfs 'afs' registered for caching
[ 15.262983] Modular ISDN core version 1.1.29
[ 15.263632] NET: Registered protocol family 34
[ 15.268041] DSP module 2.0
[ 15.268361] mISDN_dsp: DSP clocks every 80 samples. This equals 1 jiffies.
[ 15.283282] mISDN: Layer-1-over-IP driver Rev. 2.00
[ 15.288932] 0 virtual devices registered
[ 15.292593] tun: Universal TUN/TAP device driver, 1.6
[ 15.296820] mISDN: HFC-multi driver 2.03
[ 15.314047] l2tp_core: L2TP core driver, V2.0
[ 15.316625] l2tp_netlink: L2TP netlink interface
[ 15.322169] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 15.338399] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 15.338913] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 15.347232] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 15.349129] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 15.352820] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 15.353422] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 15.360183] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
[ 15.360784] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 15.367668] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 4.1.0-k
[ 15.368332] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation.
[ 15.372046] gre: GRE over IPv4 demultiplexor driver
[ 15.374760] ip_gre: GRE over IPv4 tunneling driver
[ 15.427182] ISDN subsystem Rev: 1.1.2.3/
[ 15.427194] 1.1.2.2/
[ 15.427568] 1.1.2.3/
[ 15.427849] 1.1.2.2/
[ 15.428124] 1.1.2.2
[ 15.428393]loaded
[ 15.435742] PPP BSD Compression module registered
[ 15.437787] dss1_divert module successfully installed
[ 15.450693] PPP generic driver version 2.4.2
[ 15.463669] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 15.492833] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 15.624154] Netfilter messages via NETLINK v0.30.
[ 15.629907] ip_set: protocol 6
[ 15.665707] cryptodev: driver 1.9 loaded.
[ 15.671931] i2c /dev entries driver
[ 15.694010] u32 classifier
[ 15.694306] input device check on
[ 15.694650] Actions configured
[ 15.698958] Mirror/redirect action on
[ 15.713301] fuse init (API version 7.26)
[ 15.722444] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 15.730339] NET: Registered protocol family 36
[ 15.837005] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 15.837442] Copyright (c) 2007 Atheros Corporation.
[ 15.842929] Bridge firewalling registered
[ 15.849216] cm109: Keymap for Komunikate KIP1000 phone loaded
[ 15.849911] usbcore: registered new interface driver cm109
[ 15.850431] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[ 15.855541] Loading modules backported from Linux version v4.19.79-0-gdafd634415a7
[ 15.856133] Backport generated by backports.git v4.19.79-1-0-g0c303298
[ 15.862695] usbcore: registered new interface driver dmx_usb
[ 15.863149] /home/wulishui/18065/build_dir/target-x86_64_musl/linux-x86_64/dmx_usb_module-0.1.20130818/dmx_usb.c: DMX USB Driver v0.1.20130818
[ 15.867489] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 15.867951] e100: Copyright(c) 1999-2006 Intel Corporation
[ 15.874074] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 15.874542] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 15.896473] gigaset: Driver for Gigaset 307x
[ 15.896852] gigaset: ISDN4Linux interface
[ 15.899014] hso: drivers/net/usb/hso.c: Option Wireless
[ 15.899717] usbcore: registered new interface driver hso
[ 15.906392] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 15.908416] usbcore: registered new interface driver ipheth
[ 15.917415] usbcore: registered new interface driver kaweth
[ 15.974120] has_svm: not amd
[ 15.974432] kvm: no hardware support
[ 16.056849] kvm: no hardware support
[ 16.123251] lib80211: common routines for IEEE802.11 drivers
[ 16.123685] lib80211_crypt: registered algorithm 'NULL'
[ 16.125418] lib80211_crypt: registered algorithm 'CCMP'
[ 16.127183] lib80211_crypt: registered algorithm 'TKIP'
[ 16.128797] lib80211_crypt: registered algorithm 'WEP'
[ 16.136667] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[ 16.144699] ctnetlink v0.93: registering with nfnetlink.
[ 16.300260] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[ 16.354103] appfilter version:1.0.1
[ 16.354780] register char dev....ok
[ 16.355616] begin load feature config.....
[ 16.362269] file size: 3742
[ 16.413238] invalid feature:
[ 16.413559] invalid feature:
[ 16.414333] init app filter ........ok
[ 16.421086] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 16.424968] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 16.425788] usbcore: registered new interface driver pegasus
[ 16.431722] PPP MPPE Compression module registered
[ 16.435164] NET: Registered protocol family 24
[ 16.438458] p p t p driver version 0.8.5
[ 16.452626] usbcore: registered new interface driver r8152
[ 16.456570] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 16.458957] r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc90000025000, 00:30:18:c0:cf:9a, XID 0c200000 IRQ 25
[ 16.459667] r8169 0000:02:00.0 eth0: jumbo features
[ 16.460615] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 16.463168] r8169 0000:03:00.0 eth1: RTL8168e/8111e at 0xffffc90000035000, 00:30:18:c0:cf:9b, XID 0c200000 IRQ 26
[ 16.463900] r8169 0000:03:00.0 eth1: jumbo features
[ 16.471317] usbcore: registered new interface driver r8712u
[ 16.474050] usbcore: registered new interface driver rtl8150
[ 16.484693] sis900.c: v1.08.10 Apr. 2 2006
[ 16.490729] sky2: driver version 1.30
[ 16.498534] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 16.501447] usbcore: registered new interface driver ums-alauda
[ 16.503715] usbcore: registered new interface driver ums-cypress
[ 16.506193] usbcore: registered new interface driver ums-datafab
[ 16.508575] usbcore: registered new interface driver ums-freecom
[ 16.511011] usbcore: registered new interface driver ums-isd200
[ 16.513400] usbcore: registered new interface driver ums-karma
[ 16.515799] usbcore: registered new interface driver ums-sddr09
[ 16.518322] usbcore: registered new interface driver ums-sddr55
[ 16.520978] usbcore: registered new interface driver ums-usbat
[ 16.525374] usbcore: registered new interface driver usb_gigaset
[ 16.525825] usb_gigaset: USB Driver for Gigaset 307x using M105
[ 16.556212] usbcore: registered new interface driver usbserial
[ 16.556867] usbcore: registered new interface driver usbserial_generic
[ 16.557525] usbserial: USB Serial support registered for generic
[ 16.563086] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 16.569247] usbcore: registered new interface driver visor
[ 16.569861] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[ 16.570745] usbserial: USB Serial support registered for Sony Clie 5.0
[ 16.571392] usbserial: USB Serial support registered for Sony Clie 3.5
[ 16.577484] usbcore: registered new interface driver cdc_xr_usb_serial
[ 16.577967] xr_usb_serial_common: Exar USB UART (serial port) driver
[ 16.655243] xt_time: kernel timezone is -0000
[ 16.657443] usbcore: registered new interface driver yealink
[ 16.660333] usbcore: registered new interface driver ark3116
[ 16.660967] usbserial: USB Serial support registered for ark3116
[ 16.672786] usbcore: registered new interface driver asix
[ 16.678039] usbcore: registered new interface driver ax88179_178a
[ 16.683865] usbcore: registered new interface driver bas_gigaset
[ 16.684319] bas_gigaset: USB Driver for Gigaset 307x
[ 16.686899] usbcore: registered new interface driver belkin_sa
[ 16.687510] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 16.690665] usbcore: registered new interface driver cdc_eem
[ 16.695483] usbcore: registered new interface driver cdc_ether
[ 16.703754] usbcore: registered new interface driver cdc_ncm
[ 16.706167] usbcore: registered new interface driver cdc_subset
[ 16.772294] usbcore: registered new interface driver ch341
[ 16.772884] usbserial: USB Serial support registered for ch341-uart
[ 16.775653] usbcore: registered new interface driver cp210x
[ 16.776257] usbserial: USB Serial support registered for cp210x
[ 16.779993] usbcore: registered new interface driver cxacru
[ 16.782903] usbcore: registered new interface driver cypress_m8
[ 16.783521] usbserial: USB Serial support registered for DeLorme Earthmate USB
[ 16.784256] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[ 16.785015] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[ 16.792357] usbcore: registered new interface driver dm9601
[ 16.873918] usbcore: registered new interface driver ftdi_sio
[ 16.874548] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 16.877983] usbcore: registered new interface driver garmin_gps
[ 16.878619] usbserial: USB Serial support registered for Garmin GPS usb/tty
[ 16.882034] usbcore: registered new interface driver huawei_cdc_ncm
[ 16.885038] usbcore: registered new interface driver io_edgeport
[ 16.885659] usbserial: USB Serial support registered for Edgeport 2 port adapter
[ 16.886421] usbserial: USB Serial support registered for Edgeport 4 port adapter
[ 16.887188] usbserial: USB Serial support registered for Edgeport 8 port adapter
[ 16.887939] usbserial: USB Serial support registered for EPiC device
[ 16.929621] Intel(R) Wireless WiFi driver for Linux
[ 16.930104] Copyright(c) 2003- 2015 Intel Corporation
[ 16.933808] usbcore: registered new interface driver kalmia
[ 16.937132] usbcore: registered new interface driver keyspan
[ 16.937791] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 16.938584] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 16.939371] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 16.940241] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 16.957177] has_svm: not amd
[ 16.957494] kvm: no hardware support
[ 17.065761] kvm: no hardware support
[ 17.148865] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 17.172186] libipw: 802.11 data/management/control stack, git-1.1.13
[ 17.172646] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 17.241183] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 17.244350] usbcore: registered new interface driver mct_u232
[ 17.246266] usbserial: USB Serial support registered for MCT U232
[ 17.249344] usbcore: registered new interface driver mos7720
[ 17.249883] usbserial: USB Serial support registered for Moschip 2 port adapter
[ 17.282308] usbcore: registered new interface driver mt7601u
[ 17.342545] usbcore: registered new interface driver mt76x2u
[ 17.384943] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[ 17.387382] orinoco_pci 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
[ 17.390322] orinoco_plx 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, Daniel Barlow <dan@telent.net>)
[ 17.392600] usbcore: registered new interface driver oti6858
[ 17.393242] usbserial: USB Serial support registered for oti6858
[ 17.403849] usbcore: registered new interface driver p54usb
[ 17.406585] usbcore: registered new interface driver pl2303
[ 17.407203] usbserial: USB Serial support registered for pl2303
[ 17.409550] usbcore: registered new interface driver plusb
[ 17.417436] usbcore: registered new interface driver qmi_wwan
[ 17.423660] usbcore: registered new interface driver rndis_host
[ 17.436544] usbcore: registered new interface driver RSI-USB WLAN
[ 17.486424] usbcore: registered new interface driver rt73usb
[ 17.492940] usbcore: registered new interface driver rtl8187
[ 17.503962] usbcore: registered new interface driver rtl8xxxu
[ 17.544241] usbcore: registered new interface driver sierra
[ 17.544871] usbserial: USB Serial support registered for Sierra USB modem
[ 17.551424] usbcore: registered new interface driver sierra_net
[ 17.560833] usbcore: registered new interface driver smsc95xx
[ 17.564725] usbcore: registered new interface driver speedtch
[ 17.572809] usbcore: registered new interface driver sr9700
[ 17.576375] usbcore: registered new interface driver ti_usb_3410_5052
[ 17.577053] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[ 17.577834] usbserial: USB Serial support registered for TI USB 5052 2 port adapter
[ 17.582705] usbcore: registered new interface driver ueagle-atm
[ 17.585409] usbcore: registered new interface driver usb_serial_simple
[ 17.586453] usbserial: USB Serial support registered for carelink
[ 17.587332] usbserial: USB Serial support registered for zio
[ 17.587944] usbserial: USB Serial support registered for funsoft
[ 17.588944] usbserial: USB Serial support registered for flashloader
[ 17.589598] usbserial: USB Serial support registered for google
[ 17.590299] usbserial: USB Serial support registered for libtransistor
[ 17.590933] usbserial: USB Serial support registered for vivopay
[ 17.591557] usbserial: USB Serial support registered for moto_modem
[ 17.592230] usbserial: USB Serial support registered for motorola_tetra
[ 17.592873] usbserial: USB Serial support registered for novatel_gps
[ 17.593524] usbserial: USB Serial support registered for hp4x
[ 17.594163] usbserial: USB Serial support registered for suunto
[ 17.594766] usbserial: USB Serial support registered for siemens_mpi
[ 17.609660] usbcore: registered new interface driver usb8xxx
[ 17.652039] usbcore: registered new interface driver zd1211rw
[ 17.728023] usbcore: registered new interface driver ath6kl_usb
[ 17.809291] Broadcom 43xx driver loaded [ Features: PNL ]
[ 17.822355] Broadcom 43xx-legacy driver loaded [ Features: PLD ]
[ 17.837999] usbcore: registered new interface driver brcmfmac
[ 17.874729] usbcore: registered new interface driver carl9170
[ 17.880525] usbcore: registered new interface driver cdc_mbim
[ 17.883490] usbcore: registered new interface driver ipw
[ 17.884120] usbserial: USB Serial support registered for IPWireless converter
[ 17.891520] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 17.892025] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 17.899724] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2k
[ 17.900329] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 18.024470] has_svm: not amd
[ 18.024789] kvm: no hardware support
[ 18.143600] kvm: no hardware support
[ 18.242383] usbcore: registered new interface driver mt76x0u
[ 18.247939] usbcore: registered new interface driver option
[ 18.249227] usbserial: USB Serial support registered for GSM modem (1-port)
[ 18.253367] usbcore: registered new interface driver qcserial
[ 18.254036] usbserial: USB Serial support registered for Qualcomm USB modem
[ 18.274298] usbcore: registered new interface driver rt2500usb
[ 18.337120] usbcore: registered new interface driver rt2800usb
[ 18.395607] usbcore: registered new interface driver rtl8192cu
[ 18.461745] usbcore: registered new interface driver ath9k_htc
[ 18.471400] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 18.472069] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 18.472498] iwl3945: hw_scan is disabled
[ 18.484583] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 18.485092] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 18.514820] has_svm: not amd
[ 18.515129] kvm: no hardware support
[ 18.652767] kvm: no hardware support
[ 18.778767] ath: EEPROM regdomain: 0x6c
[ 18.778776] ath: EEPROM indicates we should expect a direct regpair map
[ 18.778790] ath: Country alpha2 being used: 00
[ 18.778796] ath: Regpair used: 0x6c
[ 18.792217] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 18.795458] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90000300000, irq=16
[ 18.829878] has_svm: not amd
[ 18.830248] kvm: no hardware support
[ 18.968607] kvm: no hardware support
[ 19.059172] has_svm: not amd
[ 19.059479] kvm: no hardware support
[ 19.179940] kvm: no hardware support
[ 19.250924] kmodloader: 2 modules could not be probed
[ 19.251544] kmodloader: - kvm-amd - 0
[ 19.252029] kmodloader: - kvm-intel - 0
[ 36.062889] r8169 0000:02:00.0 eth0: link down
[ 36.066873] br-lan: port 1(eth0) entered blocking state
[ 36.067303] br-lan: port 1(eth0) entered disabled state
[ 36.068153] device eth0 entered promiscuous mode
[ 36.076622] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 36.442867] r8169 0000:03:00.0 eth1: link down
[ 36.443530] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 38.877207] ath: EEPROM regdomain: 0x809c
[ 38.877566] ath: EEPROM indicates we should expect a country code
[ 38.878018] ath: doing EEPROM country->regdmn map search
[ 38.878418] ath: country maps to regdmn code: 0x52
[ 38.878791] ath: Country alpha2 being used: CN
[ 38.879145] ath: Regpair used: 0x52
[ 38.879455] ath: regdomain 0x809c dynamically updated by user
[ 40.869685] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.879332] br-lan: port 2(wlan0) entered blocking state
[ 40.879728] br-lan: port 2(wlan0) entered disabled state
[ 40.880743] device wlan0 entered promiscuous mode
[ 41.649643] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 41.650596] br-lan: port 2(wlan0) entered blocking state
[ 41.651019] br-lan: port 2(wlan0) entered forwarding state
[ 41.651888] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 50.949545] config size: 25,data = { "op": 3, "data": { } }
[ 50.949545]
[ 50.950698] #########show app status##########
[ 50.951464]
[ 50.951464]
[ 50.951464]
[ 51.481570] r8169 0000:02:00.0 eth0: link up
[ 51.482765] br-lan: port 1(eth0) entered blocking state
[ 51.483180] br-lan: port 1(eth0) entered forwarding state
[ 59.444684] print_req_error: I/O error, dev loop0, sector 1414
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entered disabled state
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
br-lan: port 2(wlan0) entered blocking state
br-lan: port 2(wlan0) entered disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entered blocking state
br-lan: port 2(wlan0) entered forwarding state
br-lan: port 2(wlan0) entered disabled state
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
br-lan: port 2(wlan0) entered blocking state
br-lan: port 2(wlan0) entered forwarding state
感谢楼主！
会不会是内核版本太低了 ？
那个男人 发表于 2019-12-24 14:44
会不会是内核版本太低了 ？
优盘的分区加载有问题。而且只有你一个人的有问题，该从别的地方找原因了。只能帮你到这。
wulishui 发表于 2019-12-24 15:30 static/image/common/back.gif
优盘的分区加载有问题。而且只有你一个人的有问题，该从别的地方找原因了。只能帮你到这。
u盘换过4个啊都是用diskimage写盘工具在win下写的 而且我写别人编译的固件都可以启动
那个男人 发表于 2019-12-24 15:34
u盘换过4个啊都是用diskimage写盘工具在win下写的 而且我写别人编译的固件都可以启动
我的源码和他们不同，我的来自官方。
反正我是没办法了。你自己研究编译吧。
那个男人 发表于 2019-12-24 15:34
u盘换过4个啊都是用diskimage写盘工具在win下写的 而且我写别人编译的固件都可以启动
diskimage，如果我没记错的话，比较多问题。