有谁见过这种宽带设备吗？

horizon

趋势防毒

housecall

跟人家拆解的某款juniper防火墙的各个芯片什么的类似
吸铁石 发表于 2010-3-20 11:30

要是能找到具体型号就好了，弄个FW刷上

housecall

网上看了一下规格，硬件还算可以，就是找不到哪里OEM的
■システム仕様
製品名：Trend Micro Network VirusWall 300
プロセッサ：Intel IXP
メモリサイズ：RAM 64MB, Flash ROM 32MB
イーサネットポート：10/100 Base-TX × 5 （ External × 1 、 Internal × 4 ）
USB ポート：2.0 × 1
電源：100-240VAC （入力）、 12V DC 1.5A （出力）
外寸：高さ 30mm ×幅 215mm ×奥行き 130mm
重量：0.72kg
スループット：最大 30Mbps

http://jp.trendmicro.com/jp/abou ... 20070201074001.html

msc

路过，看看

msc

不知道什么什么东东

housecall

今天无聊拆开接了TTL看了下，有输出，的确是64M内存，32M Flash，按Reset后接通电源，进入恢复模式，能通过TFTP上传固件，这个设备IP地址恢复模式下为192.168.23.1，可惜目前不知道能刷哪种第三方的固件

housecall

TrendMicro Bootloader Version 0.31
Board Hardware Verison 0
BSP Version 0.5


[BM] find Boot ROM   512KB (BF,D7)
[NF] find NAND Flash  32MB (EC,75)

Reset Button --> Rescue Mode [RS]
Ctrl-C       --> Engineer Mode [EM]


Enter Normal Mode [NM]

Loading a stored image...
  info.IsValid 1
  info.Image_Length 962016RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
RRRRR SUCCESS
Decoding the image...
[trend_decode_img] original_data_start 500040 size 962016SUCCESS
Verify the image...SUCCESS
Preload the image...
[MGG_IMG_Preload] kernel image memcpy 1600000 <-- 6f8380 eaa8c(961164)SUCCESS
Start the image...
[MGG_RTC_SetWatchDog] 0
[MGG_IMG_SaveToNand]....SUCCESS!Uncompressing Linux.............................
..................................... done, booting the kernel.
Linux version 2.4.20_mvl31-brh (root@build-rh9.build.tw.trendnet.org) (gcc versi
on 3.3.1 (MontaVista 3.3.1-3.0.10.0300532 2003-12-24)) #1 Fri Jan 6 10:46:29 CST
2006
CPU: XScale-IXP4xx/IXC11xx [690541c1] revision 1 (ARMv5TE)
CPU: D undefined 5 cache
CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Machine: ADI Engineering Coyote
Security risk: creating user accessible mapping for 0x50000000 at 0xf0000000
Security risk: creating user accessible mapping for 0x52000000 at 0xf2000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS1,115200 root=/dev/mtdblock1 rw ip=off mem=64M
initrd=0x7e2e10,8M
Calibrating delay loop... 532.48 BogoMIPS
Memory: 64MB = 64MB total
Memory: 54384KB available (1673K code, 468K data, 68K init)
XScale Cache/TLB Locking Copyright(c) 2001 MontaVista Software, Inc.
XScale cache_lock_init called
   Calling consistent alloc
   low_level_page initialized
   low_level_page @ 0xc4800000
      icache_lock_fn @ 0xc4800080
      dcache_lock_fn @ 0xc48000a0
      icache_unlock_fn @ 0xc4800098
      dcache_unlock_fn @ 0xc48000f0
Initializing TLB locking
TLB locking initialized
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
PCI Autoconfig: Found Bus 0, Device 14, Function 0
PCI Autoconfig: BAR 0, I/O, size=0x20, address=0xffffffe0
PCI Autoconfig: Found Bus 0, Device 14, Function 1
PCI Autoconfig: BAR 0, I/O, size=0x20, address=0xffffffc0
PCI Autoconfig: Found Bus 0, Device 14, Function 2
PCI Autoconfig: BAR 0, Mem, size=0x100, address=0x4bffff00
PCI: bus0: Fast back to back transfers disabled
slot=0
slot=14
slot=14
slot=14
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
LSP Revision 1
ikconfig 0.5 with /proc/ikconfig
Starting kswapd
Disabling the Out Of Memory Killer
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xff000003 (irq = 15) is a XSCALE UART
ttyS01 at 0xff001003 (irq = 13) is a XSCALE UART
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 20480K size 1024 blocksize
loop: loaded (max 8 devices)
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
blkmtd: error: missing `device' name

Foxconn nand mtd driver 0.3<6>NAND device: Manufacturer ID: 0xec, Chip ID: 0x75
(Samsung NAND 32MiB 3,3V)
Creating 2 MTD partitions on "NAND 32MiB 3,3V":
0x00000000-0x00200000 : "MGG IMAGE Partition"
0x00200000-0x02000000 : "MGG Partition 1"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci_hcd 00:0e.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:0e.2: irq 22, pci mem 4bffff00
usb.c: new USB bus registered, assigned bus number 1
PCI: 00:0e.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correctin
g to 32
ehci_hcd 00:0e.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 4 ports detected
host/usb-uhci.c: $Revision: 1.275 $ time 10:47:23 Jan  6 2006
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: USB UHCI at I/O 0xffffffe0, IRQ 22
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-uhci.c: USB UHCI at I/O 0xffffffc0, IRQ 22
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 164 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Ebtables v2.0 registered<6>NET4: Ethernet Bridge 008 for NET4.0
Bridge firewalling registered
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Couldn't find valid RAM disk image starting at 0.
Freeing initrd memory: 8192K
cramfs: wrong magic
FAT: bogus logical sector size 65535
UMSDOS: msdos_read_super failed, mount aborted.
FAT: bogus logical sector size 65535
FAT: bogus logical sector size 65535
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 68K
init started:  BusyBox v0.60.5 (2006.01.06-02:51+0000) multi-call binary
Mounting filesystems ...
Using /lib/modules/BDD_mod.o
[BDD] .text 0xC48E0060 .data 0xC48EA740
[NF] NAND_BaseAddr set c48f5000<1>[BDD] BSP init
[BM] find Boot ROM   512KB (BF,D7)[BDD] skip reading nand device id
[NF] find NAND Flash  32MB (EC,75)
[BDD] create mirrored mtd blocksFoxconn nand mtd driver 0.4<6>NAND device: Manuf
acturer ID: 0xec, Chip ID: 0x75 (Samsung NAND 32MiB 3,3V)
Creating 2 MTD partitions on "NAND 32MiB 3,3V":
0x00000000-0x00200000 : "MGG IMAGE Partition"
0x00200000-0x02000000 : "MGG Partition 1"
[BDD] register_chrdev<1>Loading Device Driver Ver 1.0 Build 3 -->> /dev/FOX_BDD
/dev c 0 0  [FAIL]
[BDD] Setup reset button IRQ<1>[BDD] start LED Thread<1>[BDD] enable ports state
LED<1>[BDD] init done.insmod /lib/modules/BDD_mod.o finished! [0]
Enable LED to green
<1>BDD_SET_LED --> 1 1(0x1)
MGG_Switch_Set_8021Q_4VlanMode

housecall

[MGG_Switch_Enable] sw_chip 95802.1Q, Port Vlan!!<NULL>
<1>[BDD] Enable Watchdog, Timeout is 0 sec
[BDD] Start WatchDog Auto ResetUsing /opt/TrendMicro/MVP/lib/watchdog.o
Warning: loading watchdog will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modu
les
Using /lib/modules/ixp400.o
Warning: loading ixp400 will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modu
les
Module init.
Using /lib/modules/ixp425_eth.o
ixp425_eth:
Initializing IXP425 NPE Ethernet driver software v. 1.1A
ixp425_eth:
IX_FEATURECTRL_ETH_LEARNING, FALSE
ixp425_eth: CPU clock speed (approx) = 0 MHz
ixp425_eth: ixp0 is using the PHY at address 4
ixp425_eth: ixp1 is using the PHY at address 5
Fri May 29 15:43:14 UTC 2009
Creating ramdisk for /var (1M)...
Init /var filesystem ...
Added VLAN with VID == 4 to IF -:ixp0:-
device ixp0.4 entered promiscuous mode
ixp0.4: dev_set_promiscuity(master, 1)
ixp425_eth: ixp0: Entering promiscuous mode
device ixp0 entered promiscuous mode
ixp0.4: add 01:00:5e:00:00:01 mcast address to master interface
Added VLAN with VID == 3 to IF -:ixp0:-
ixp0.3: attempt to add interface with same source address.
ixp0.3: dev_set_promiscuity(master, 1)
ixp0.3: add 01:00:5e:00:00:01 mcast address to master interface
Added VLAN with VID == 2 to IF -:ixp0:-
ixp0.2: attempt to add interface with same source address.
ixp0.2: dev_set_promiscuity(master, 1)
ixp0.2: add 01:00:5e:00:00:01 mcast address to master interface
Added VLAN with VID == 1 to IF -:ixp0:-
WARNING:  VLAN 1 does not work with many switches,
consider another number if you have problems.
ixp0.1: attempt to add interface with same source address.
ixp0.1: dev_set_promiscuity(master, 1)
ixp0.1: add 01:00:5e:00:00:01 mcast address to master interface
device ixp1 entered promiscuous mode
ixp425_eth: ixp1: Entering promiscuous mode
br0: port 5(ixp1) entering learning state
br0: port 4(ixp0.1) entering learning state
br0: port 3(ixp0.2) entering learning state
br0: port 2(ixp0.3) entering learning state
br0: port 1(ixp0.4) entering learning state
MGG_Switch_SetPortState port=3 state=1<1>MGG_Switch_SetPortState port=4 state=1<
1>MGG_Switch_SetPortState port=5 state=1<1>MGG_Switch_SetPortPhyReg port=1 state
=95<1>MGG_Switch_SetPortPhyReg port=2 state=95<1>MGG_Switch_SetPortPhyReg port=3
state=95<1>MGG_Switch_SetPortPhyReg port=4 state=95<1>MGG_Switch_SetPortPhyReg
port=5 state=95dhcpcd[178]: broadcasting DHCP_DISCOVER

<6>br0: port 5(ixp1) entering forwarding state
br0: topology change detected, propagating
br0: port 4(ixp0.1) entering forwarding state
br0: topology change detected, propagating
br0: port 3(ixp0.2) entering forwarding state
br0: topology change detected, propagating
br0: port 2(ixp0.3) entering forwarding state
br0: topology change detected, propagating
br0: port 1(ixp0.4) entering forwarding state
br0: topology change detected, propagating
dhcpcd[179]: timed out waiting for a valid DHCP server response

Using /opt/TrendMicro/MVP/lib/ktmSyslog.o
Using /opt/TrendMicro/MVP/avenforcer/natconn.o
Warning: loading natconn will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modu
les
$Starting iprange: [  OK  ]
Using /opt/TrendMicro/MVP/lib/action_core.o
Warning: loading action_core will taint the kernel: no license
  See http://www.tux.org/lkml/#export-tainted for information about tainted modu
les
Start the Network Scan
BDD_SET_LED --> 2 1(0x1)
BDD_SET_LED --> 3 1(0x1)
MGG_LB_Diable
MAX log number: 50
Cannot open office scan agent pidfile
MAX log number: 50
Canno[HookReset] At pid 466t open office scan agent pidfile
MAX log number: 50
Cannot open office scan agent pidfile
MAX log number: 50
Cannot open office scan agent pidfile
Cannot open office scan agent pidfile

housecall

今天重新找出这台设备了，看看能否改造一下

德国之声

housecall 发表于 2012-4-5 17:41
今天重新找出这台设备了，看看能否改造一下

都四年  还没有结果？？