openwrt 编译下载出错，求高手帮助

cccol82

下载错误，链接也打不开，网上也找不到代码包
--2016-03-31 20:15:25--  (try: 5)  https://github-cloud.s3.amazonaw ... tion%2Foctet-stream
Connecting to github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)|54.231.1.137|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 835048 (815K) [application/octet-stream]
Saving to: 'STDOUT'

0% [                                                                                                       ] 0           --.-K/s   in 0s     

2016-03-31 20:15:57 (0.00 B/s) - Read error at byte 0/835048 (Success). Giving up.

Download failed.
--2016-03-31 20:15:57--  http://mirror2.openwrt.org/sources/flex-2.6.1.tar.xz
Resolving mirror2.openwrt.org (mirror2.openwrt.org)... 46.4.11.11
Connecting to mirror2.openwrt.org (mirror2.openwrt.org)|46.4.11.11|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2016-03-31 20:15:58 ERROR 404: Not Found.

Download failed.
--2016-03-31 20:15:58--  http://downloads.openwrt.org/sources/flex-2.6.1.tar.xz
Resolving downloads.openwrt.org (downloads.openwrt.org)... 78.24.191.177
Connecting to downloads.openwrt.org (downloads.openwrt.org)|78.24.191.177|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2016-03-31 20:16:00 ERROR 404: Not Found.

Download failed.
No more mirrors to try - giving up.
make[3]: *** [/home/colwei/openwrt/openwrt/dl/flex-2.6.1.tar.xz] Error 2
make[3]: Leaving directory `/home/colwei/openwrt/openwrt/tools/flex'
make[2]: *** [tools/flex/compile] Error 2
make[2]: Leaving directory `/home/colwei/openwrt/openwrt'
make[1]: *** [/home/colwei/openwrt/openwrt/staging_dir/target-mipsel_24kec+dsp_musl-1.1.14/stamp/.tools_install_yynyynynynyyyyyyynyyynyyyyyyyyynyyyyynnyynynnyyynnnyy] Error 2
make[1]: Leaving directory `/home/colwei/openwrt/openwrt'
make: *** [world] 错误 2

墨冥延

上面那玩意下载失败而已，自己想办法下载。放dl目录。

dnnn

flex-2.6.1下载出错,上国外的代理可以下载到,随手送你一个,下载后改名为flex-2.6.1.tar.xz放到dl目录下载,重新编译.

cccol82

dnnn 发表于 2016-4-1 12:37
flex-2.6.1下载出错,上国外的代理可以下载到,随手送你一个,下载后改名为flex-2.6.1.tar.xz放到dl目录下载, ...

谢谢您！谢谢！

kerr

我最近也折腾好几天了..终于编译成功了, 楼主有问题可以大家一起探讨..

lch911

https://github.com/getlantern/lantern-binaries这里下载一个蓝灯，一个GOOGLE发的免费的番墙软件。安装完打开就可以了，不用了就退出软件，就这么简单。我头一次编译的时候就开着这个，一次性过。

痴人说梦

下载不了的东西到这个网址找找试试，一般都有。
http://buildbot.openwrt.org:8010/src/

001lym

lch911 发表于 2016-4-1 15:46
https://github.com/getlantern/lantern-binaries这里下载一个蓝灯，一个GOOGLE发的免费的番墙软件。安装完 ...

这个好，爬梯神器，安逸