|
本帖最后由 MINE 于 2010-5-29 20:25 编辑
F5D7231-4 设备上的Version为00399-4712L,升级了f5d7231-4v1_uk_4.07.07 (http://belkin.com/uk/support/art ... d=5755&scid=282 官网下载)后,当前设备信息为:
Firmware Version 4.07.07
Boot Version 2.01.09
Hardware F5D7231-4
Serial No. BEL1R99R
用TFTP方法试图升级DD-WRT(比如dd-wrt.v23_micro_generic等,大小都不超过2M)固件总是不成功,
以下是升级过程和升级后TTL输出log
Decompressing..........done
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Wed Oct 6 17:54:04 CST 2004 (denny@dny_fc2.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.9.0
CPU type 0x29007: 200MHz
Total memory: 0x800000 bytes (8MB)
Total memory used by CFE: 0x80300000 - 0x80435970 (1268080)
Initialized Data: 0x8032FA30 - 0x80331D70 (9024)
BSS Area: 0x80331D70 - 0x80333970 (7168)
Local Heap: 0x80333970 - 0x80433970 (1048576)
Stack Area: 0x80433970 - 0x80435970 (8192)
Text (code) segment: 0x80300000 - 0x8032FA30 (195120)
Boot area (physical): 0x00436000 - 0x00476000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-11-50-4F-51-A4, ipaddr 192.168.2.1, mask 255.255.255.0
gateway not set, nameserver not set
Reading :: Done. 1732608 bytes read
[flash1.trx] : Programming...done. 1732608 bytes written
boardcase upgrade status to client: upgrade success
Loader:raw Filesys:raw Dev:flash0.os File: Options null)
Loading: .. 3732 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
LOG中有明显的upgrade success提示,但自动重启后到Starting program at 0x80001000就停止。
当然现在仍然可以用同样的方法升级官网固件:f5d7231-4v1_uk_4.07.07
请大家帮忙。 |
|