Mercury MW4530R cannot be factory reset

Purple Qi Dong is here

I searched for a MW4530R on the Internet, and found that I wanted a wireless password to log in, and I contacted the seller and said that a few passwords were not good, and I thought that I could recover it directly by pressing rest, and I didn't want to press it until it hurt to the hand, and the sys light was not on. Press and hold the WPS button in front of me again, and continue to pretend to be dead without moving. I looked at the information on the Internet for a day,ping the network,192.168.1.1 doesn't work,192.168.2.1 OK,Continue telnet,According to what the Internet says,The next step should be to change the login password,But it didn't follow the script,See picture。 It's completely out of line, ask the big guys to help take a look and give me some pointers. C:\Users\Administrator\Desktop\IMG_20200505_212120

haxc

Press the previous button and plug in the breed again, and flash a firmware again

GR13

Encounter a similar problem: MT7620N chip router is okay, the login password can't be used, and there is no way to restore the factory settings, that big guy can help solve it?

Purple Qi Dong is here

haxc Posted on 2020-5-5 21:59
Press the previous button and plug in the breed again, and flash a firmware again

Do I need a password for the login account for routing?

haxc

Turn off the power first. Press and hold again after resetting. It can be reset after 30 seconds of powering on... WGR614 V6 Brush DD-WRT forgot the login password is reset like this..

If it doesn't work, log in with a TTL cable and reset it

Purple Qi Dong is here

haxc Posted on 2020-5-7 21:26
Turn off the power first. Press and hold again after resetting. It can be reset after 30 seconds of powering on... WGR614 V6 Brush DD-WRT forgot the login password is reset like this..

No, ...

No matter if you press the reset button or the front WPS button, the sys light does not respond, is this normal?

Purple Qi Dong is here

haxc Posted on 2020-5-7 21:26
Turn off the power first. Press and hold again after resetting. It can be reset after 30 seconds of powering on... WGR614 V6 Brush DD-WRT forgot the login password is reset like this..

No, ...

There are only 2.4G and 5G on the front panel, and the USB light is always on

GR13

Purple air east is coming Posted on 2020-5-6 11:02
Do I need a password for the login account for routing?

It's just that you don't have the original account password, and you can't use it

GR13

Is there any way to do it?

Purple Qi Dong is here

It's really hard for newbies!

Purple Qi Dong is here

haxc Posted on 2020-5-7 21:26
Turn off the power first. Press and hold again after resetting. It can be reset after 30 seconds of powering on... WGR614 V6 Brush DD-WRT forgot the login password is reset like this..

No, ...

Big guy,Finger,After the TTL cable is connected,You can run the code,But you can't enter CFE mode,Can't reset

Purple Qi Dong is here

haxc Posted on 2020-5-7 21:26
Turn off the power first. Press and hold again after resetting. It can be reset after 30 seconds of powering on... WGR614 V6 Brush DD-WRT forgot the login password is reset like this..

No, ...

haxc

factory reset under TTL,

1. When the router is connected to the monitor, the OpenWRT code interface will be displayed automatically
2. Enter firstboot in root
3. Enter
4. Enter Y
5. Enter key
6. Restart your router