编译5350固件

8925***

跟着论坛的帖子编译5350的固件 openwrt源码版本确定为35407 patch没有提示出错

make menuconfig之后选择最基本的三个
make V=s 提示
Applying patch generic/474-mtd_mp25p80_add_pm25lq032.patch
patching file drivers/mtd/devices/m25p80.c
Hunk #1 succeeded at 676 (offset -6 lines).
patching file drivers/mtd/devices/m25p80.c
Hunk #1 FAILED at 682.
1 out of 1 hunk FAILED -- rejects in file drivers/mtd/devices/m25p80.c
Patch generic/474-mtd_mp25p80_add_pm25lq032.patch does not apply (enforce with -f)
make[4]: *** [/home/xiaoye/openwrt/trunk/build_dir/target-mipsel_r2_uClibc-0.9.33.2/linux-ramips_rt305x/linux-3.7.5/.quilt_checked] Error 1
make[4]: Leaving directory `/home/xiaoye/openwrt/trunk/target/linux/ramips'
make[3]: *** [compile] Error 2
make[3]: Leaving directory `/home/xiaoye/openwrt/trunk/target/linux'
make[2]: *** [target/linux/compile] Error 2
make[2]: Leaving directory `/home/xiaoye/openwrt/trunk'
make[1]: *** [/home/xiaoye/openwrt/trunk/staging_dir/target-mipsel_r2_uClibc-0.9.33.2/stamp/.target_compile] Error 2
make[1]: Leaving directory `/home/xiaoye/openwrt/trunk'
make: *** [world] 错误 2


这是什么原因 求助

laom***

好像是这里出错了  1 out of 1 hunk FAILED -- rejects in file drivers/mtd/devices/m25p80.c


make V=99 2>&1 |tee build.log |grep -i error收集下错误信息看看是哪里有问题

cn***

laoma348 发表于 2013-7-19 18:14
好像是这里出错了  1 out of 1 hunk FAILED -- rejects in file drivers/mtd/devices/m25p80.c

不知道能不能直接编译同是rt3052芯片的华硕n13u b1这个固件了？上一个版本是可以编译的