|
在论坛上看见msdlite比udpxy效率高,看了一下,在梅林原版固件及ks版都能安装,目前在386.10版本上,路由器开启telnet,进入后
amtm>ep>opkg install msd>service msd即可运行,但不管怎样配置msd.conf文件都未能成功转发组播,msd就启动了,
opt/etc/下有配置文件msd.conf,/opt/var/log/下有log文件,有朋友能研究一下该怎么设置配置文件吗?
附报错log:
[2018-05-05 05:05:35]: msd 3.01.0: started
[2018-05-05 05:05:35]: Build: Sep 1 2023 19:09:45, Release
[2018-05-05 05:05:35]: CPU count: 2
[2018-05-05 05:05:35]: descriptor table size: 1024 (max files)
[2018-05-05 05:05:35]: hostname: *
[2018-05-05 05:05:35]: Thread 1 started...
[2018-05-05 05:05:35]: Bind thread 1 to CPU 1
[2018-05-05 05:05:35] http_srv_bind_add, line 629: err_out - error 98:
[2018-05-05 05:05:35] http_srv_xml_load_start, line 361: http_srv_bind_add(): 0.0.0.0:7088, backlog = -1, tcp_cc = htcp - error 98:
[2018-05-05 05:05:35] http_srv_bind_add, line 629: err_out - error 98: œg2@ØÄ
[2018-05-05 05:05:35] http_srv_xml_load_start, line 361: http_srv_bind_add(): [:]:7088, backlog = -1, tcp_cc = htcp - error 98:
[2018-05-05 05:05:35]: no bind address specified, nothink to do...
[2018-05-05 05:05:35] main, line 609: http_srv_xml_load_start() - error 22:
[2018-05-05 05:05:39]: msd 3.01.0: started
[2018-05-05 05:05:39]: Build: Sep 1 2023 19:09:45, Release
[2018-05-05 05:05:39]: CPU count: 2
[2018-05-05 05:05:39]: descriptor table size: 1024 (max files)
[2018-05-05 05:05:39]: hostname: *
[2018-05-05 05:05:39] http_srv_bind_add, line 629: err_out - error 98:
[2018-05-05 05:05:39] http_srv_xml_load_start, line 361: http_srv_bind_add(): 0.0.0.0:7088, backlog = -1, tcp_cc = htcp - error 98:
[2018-05-05 05:05:39] http_srv_bind_add, line 629: err_out - error 98: œW8@ØÄ
[2018-05-05 05:05:39] http_srv_xml_load_start, line 361: http_srv_bind_add(): [:]:7088, backlog = -1, tcp_cc = htcp - error 98:
[2018-05-05 05:05:39]: no bind address specified, nothink to do...
[2018-05-05 05:05:39] main, line 609: http_srv_xml_load_start() - error 22:
|
|