RT-ACRH17 免拆机刷不死OpBoot教程

eric*** · 发表于 2018-7-26 12:32

重启进入opboot后，无法打开页面

页面未找到
页面君也是一脸懵逼!
You can find more information about this project on OpBoot

eric*** · 发表于 2018-7-26 12:45

串口上的打印：

RT-AC82U bootloader version: 1.0.0.9
MAC Address: B0:6E:BF:9B:21:B0
wps buootn pressed!

## Enter OpBoot Mode ##
opboot start...
No ART partition found
MAC0 addr:0:3:7f:ba:db:ad
PHY ID1: 0x4d
PHY ID2: 0xd0b1
ipq40xx_ess_sw_init done
eth0
preferred nic: eth0
eth0 PHY0 Down Speed :10 Half duplex
eth0 PHY1 Down Speed :10 Half duplex
eth0 PHY2 up Speed :1000 Full duplex
eth0 PHY3 Down Speed :10 Half duplex
eth0 PHY4 up Speed :1000 Full duplex
OpBoot by mleaf version v1.0.4.
mail:350983773@qq.com
Enter http firmware upgrading mode ip:192.168.1.1
Allocate new ip addr:192.168.1.101
mleaf dhcpd set client (50:7b:9d:c5:1a:29) ipaddr: (192.168.1.101).
found no page..
found no page..
found no page..
found no page..

eric*** · 发表于 2018-7-26 12:47

另外怎么在opboot下进行tftp升级image呢？我进入opboot后串口只有输出，键盘敲了没反应，opboot下串口不能输入吗

账号		自动登录	找回密码
密码			立即注册