设为首页收藏本站

简体中文 繁體中文 English 日本語 Deutsch 한국 사람 بالعربية TÜRKÇE português คนไทย

切换到窄版

 找回密码
 立即注册

QQ登录

只需一步，快速开始

搜索
恩山无线论坛»论坛 › 无线设备硬件相关板块 › 磊科无线路由器及网络设备 › NAP840+编程器固件
广告投放联系QQ68610888
返回列表 发新帖
查看: 948|回复: 4

NAP840+编程器固件

[复制链接]
PerNet
发表于 2022-8-1 11:13 | 显示全部楼层 |阅读模式
本帖最后由 PerNet 于 2022-8-6 16:45 编辑

固件下载地址  ：   https://2018-1251233090.cos.ap-s ... %98%E8%AE%A4MAC.zip
瑞昱（Realtek）RTL8196D+8192ER 方案，知道的有360P1同款
收了几个anp840+  用磊科286管理AP挺不错，有一个发现固件坏了。直接备份好的编程器固件写入正常使用，用winhex搜mac地址修改后自动重置为081011000304，记录一下，有需要的可以下载研究，希望有大佬解惑。

下面是修改mac后启动报错的ttl输出，第一次开机发现有个error报错然后自动重启，mac就变081011000304了，报错代码：
  • ERROR: Invalid checksum of current setting! for HW from /dev/mtdblock2, offset:6, len:5522,
  •                 [apmib_load_conf3:294][722:factory_args.sh, 721:/bin/sh][time:8]

发现好像和factory_args.sh 这个有关，用binwalk 解压后看不懂，已上传有兴趣的可以研究研究。

MAC在007c001f处修改。经过几次测试发现只要是修改007c0000到007c1597 这一部分任意数据，用编程器刷回就会报错mac地址变默认。

  1. Booting...

  3. @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
  4. @
  5. [url=home.php?mod=space&uid=162986]@[/url] chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize
  6. @ 0000000h 0ef4017h 00000efh 0000040h 0000017h 0000000h 0000017h 0800000h
  7. @ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName
  8. @ 0010000h 0000080h 0001000h 0000800h 0000100h 0000010h 000003eh W25Q64
  9. @
  10. @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  12. ---RealTek(RTL8196D)at 2018.04.03-10:30+0800 v1.6b [16bit](579MHz)
  13. ====no sys signature at 00010000!cs6c[cr6c]
  14. ret=0  sys signature at 00010000!
  15. ====no sys signature at 00020000!cs6c[cr6c]
  16. ret=0  sys signature at 00020000!
  17. ret=2  sys signature at 00030000!
  18. checksum sum 0, p_kernel_img 80500000, 00117882
  19. no rootfs signature at 000E0000!
  20. no rootfs signature at 000F0000!
  21. no rootfs signature at 00130000!
  22. no rootfs signature at 000E1000!
  23. no rootfs signature at 000E2000!
  24. no rootfs signature at 000E3000!
  25. no rootfs signature at 000E4000!
  26. no rootfs signature at 000E5000!
  27. no rootfs signature at 000E6000!
  28. no rootfs signature at 000E7000!
  29. no rootfs signature at 000E8000!
  30. no rootfs signature at 000E9000!
  31. no rootfs signature at 000EA000!
  32. no rootfs signature at 000EB000!
  33. no rootfs signature at 000EC000!
  34. no rootfs signature at 000ED000!
  35. no rootfs signature at 000EE000!
  36. no rootfs signature at 000EF000!
  37. no rootfs signature at 000F1000!
  38. no rootfs signature at 000F2000!
  39. no rootfs signature at 000F3000!
  40. no rootfs signature at 000F4000!
  41. no rootfs signature at 000F5000!
  42. no rootfs signature at 000F6000!
  43. no rootfs signature at 000F7000!
  44. no rootfs signature at 000F8000!
  45. no rootfs signature at 000F9000!
  46. no rootfs signature at 000FA000!
  47. no rootfs signature at 000FB000!
  48. no rootfs signature at 000FC000!
  49. no rootfs signature at 000FD000!
  50. no rootfs signature at 000FE000!
  51. no rootfs signature at 000FF000!
  52. no rootfs signature at 00100000!
  53. no rootfs signature at 00101000!
  54. no rootfs signature at 00102000!
  55. no rootfs signature at 00103000!
  56. no rootfs signature at 00104000!
  57. no rootfs signature at 00105000!
  58. no rootfs signature at 00106000!
  59. no rootfs signature at 00107000!
  60. no rootfs signature at 00108000!
  61. no rootfs signature at 00109000!
  62. no rootfs signature at 0010A000!
  63. no rootfs signature at 0010B000!
  64. no rootfs signature at 0010C000!
  65. no rootfs signature at 0010D000!
  66. no rootfs signature at 0010E000!
  67. no rootfs signature at 0010F000!
  68. no rootfs signature at 00110000!
  69. no rootfs signature at 00111000!
  70. no rootfs signature at 00112000!
  71. no rootfs signature at 00113000!
  72. no rootfs signature at 00114000!
  73. no rootfs signature at 00115000!
  74. no rootfs signature at 00116000!
  75. no rootfs signature at 00117000!
  76. no rootfs signature at 00118000!
  77. no rootfs signature at 00119000!
  78. no rootfs signature at 0011A000!
  79. no rootfs signature at 0011B000!
  80. no rootfs signature at 0011C000!
  81. no rootfs signature at 0011D000!
  82. no rootfs signature at 0011E000!
  83. no rootfs signature at 0011F000!
  84. no rootfs signature at 00120000!
  85. no rootfs signature at 00121000!
  86. no rootfs signature at 00122000!
  87. no rootfs signature at 00123000!
  88. no rootfs signature at 00124000!
  89. no rootfs signature at 00125000!
  90. no rootfs signature at 00126000!
  91. no rootfs signature at 00127000!
  92. no rootfs signature at 00128000!
  93. no rootfs signature at 00129000!
  94. no rootfs signature at 0012A000!
  95. no rootfs signature at 0012B000!
  96. no rootfs signature at 0012C000!
  97. no rootfs signature at 0012D000!
  98. no rootfs signature at 0012E000!
  99. no rootfs signature at 0012F000!
  100. no rootfs signature at 00131000!
  101. no rootfs signature at 00132000!
  102. no rootfs signature at 00133000!
  103. no rootfs signature at 00134000!
  104. no rootfs signature at 00135000!
  105. no rootfs signature at 00136000!
  106. no rootfs signature at 00137000!
  107. no rootfs signature at 00138000!
  108. no rootfs signature at 00139000!
  109. no rootfs signature at 0013A000!
  110. no rootfs signature at 0013B000!
  111. no rootfs signature at 0013C000!
  112. no rootfs signature at 0013D000!
  113. no rootfs signature at 0013E000!
  114. no rootfs signature at 0013F000!
  115. no rootfs signature at 00140000!
  116. no rootfs signature at 00141000!
  117. no rootfs signature at 00142000!
  118. no rootfs signature at 00143000!
  119. no rootfs signature at 00144000!
  120. no rootfs signature at 00145000!
  121. no rootfs signature at 00146000!
  122. no rootfs signature at 00147000!
  123. no rootfs signature at 00148000!
  124. no rootfs signature at 00149000!
  125. no rootfs signature at 0014A000!
  126. no rootfs signature at 0014B000!
  127. no rootfs signature at 0014C000!
  128. no rootfs signature at 0014D000!
  129. no rootfs signature at 0014E000!
  130. no rootfs signature at 0014F000!
  131. Jump to image start=0x80500000...
  132. decompressing kernel:
  133. Uncompressing Linux... done, booting the kernel.
  134. done decompressing kernel.
  135. start address: 0x80003400
  136. Realtek WLAN driver - version 1.6 (2013-02-21)
  137. Adaptivity function - version 7.1


  140. #######################################################
  141. SKB_BUF_SIZE=2408 MAX_SKB_NUM=480
  142. #######################################################




  147. Probing RTL8186 10/100 NIC-kenel stack size order[3]...
  148. chip name: 8196C, chip revid: 0
  149. NOT YET
  150. eth0 added. vid=1 Member port 0x1...
  151. eth1 added. vid=2 Member port 0x10...
  152. eth2 added. vid=1 Member port 0x2...
  153. eth3 added. vid=1 Member port 0x4...
  154. eth4 added. vid=1 Member port 0x8...
  155. eth5 added. vid=1 Member port 0x0...
  156. [peth0] added, mapping to [eth1]...
  157. zlr Creating 7 MTD partitions on "flash_bank_1":
  158. WARNNING:       find rootfs in:0x150000,        real_offset:150000
  159. 0x000000000000-0x000000150000 : "boot+cfg+linux"
  160. 0x000000150000-0x000000740000 : "root fs"
  161. 0x0000007c0000-0x000000800000 : "parm flash"
  162. 0x000000000000-0x000000800000 : "all"
  163. 0x000000740000-0x0000007c0000 : "jffs2"
  164. 0x000000000000-0x0000000d0000 : "linux up"
  165. 0x0000000d0000-0x000000800000 : "rootfs up"
  166. Realtek FastPath:v1.03
  167. serial console detected.  Disabling virtual terminals.
  168. init started:  BusyBox v1.00-pre8 (2014.08.14-10:37+0000) multi-call binary
  169. Bummer, could not run '/etc/init.d/rcS': No such file or directory


  172. BusyBox v1.00-pre8 (2014.08.14-10:37+0000) Built-in shell (msh)
  173. Enter 'help' for a list of built-in commands.

  175. mount -t jffs2 /dev/mtdblock4 /tmp/para status:0
  176. ERROR: Invalid checksum of current setting! for HW from /dev/mtdblock2, offset:6, len:5522,
  177.                 [apmib_load_conf3:294][722:factory_args.sh, 721:/bin/sh][time:8]
  178. WARNNING: first 2048 bytes of /dev/mtdblock2: hw={
  179. boardVer=1
  180. nic0Addr=081079e3fd78
  181. nic1Addr=0810117830c9
  182. wlan={
  183. 0={
  184. macAddr=081079e3fd79
  185. macAddr1=081079e3fd80
  186. macAddr2=081079e3fd81
  187. macAddr3=081079e3fd82
  188. macAddr4=081079e3fd83
  189. macAddr5=081079e3fd84
  190. macAddr6=08101781,
  191.                 [apmib_load_conf3:300][722:factory_args.sh, 721:/bin/sh][time:8]
  192. WARNNING: last 2048 bytes of /dev/mtdblock2: S_A=000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000,
  193.                 [apmib_load_conf3:307][722:factory_args.sh, 721:/bin/sh][time:8]
  194. WARNNING: try again, cnt:1,
  195.                 [apmib_load_conf3:313][722:factory_args.sh, 721:/bin/sh][time:8]
  196. ERROR: Invalid checksum of current setting! for HW from /dev/mtdblock2, offset:6, len:5522,
  197.                 [apmib_load_conf3:294][722:factory_args.sh, 721:/bin/sh][time:8]
  198. WARNNING: first 2048 bytes of /dev/mtdblock2: hw={
  199. boardVer=1
  200. nic0Addr=081079e3fd78
  201. nic1Addr=0810117830c9
  202. wlan={
  203. 0={
  204. macAddr=081079e3fd79
  205. macAddr1=081079e3fd80
  206. macAddr2=081079e3fd81
  207. macAddr3=081079e3fd82
  208. macAddr4=081079e3fd83
  209. macAddr5=081079e3fd84
  210. macAddr6=08101781,
  211.                 [apmib_load_conf3:300][722:factory_args.sh, 721:/bin/sh][time:8]
  212. WARNNING: last 2048 bytes of /dev/mtdblock2: S_A=000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000,
  213.                 [apmib_load_conf3:307][722:factory_args.sh, 721:/bin/sh][time:8]
  214. ERROR: can't read args from /dev/mtdblock2. set->nam:HW, set->len:2317, set->offset:0,
  215.                 [apmib_load_conf4:537][722:factory_args.sh, 721:/bin/sh][time:8]
  216. ERROR: section:HW, will reset to default!,
  217.                 [normal_err_msg_fun_of_section:562][722:factory_args.sh, 721:/bin/sh][time:8]
  218. @@@@@@@@@normal_reset_fun_of_section
  219. ERROR: Invalid checksum of current setting! for HW from /dev/mtdblock2, offset:6, len:5522,
  220.                 [apmib_load_conf3:294][time:8]
  221. WARNNING: first 2048 bytes of /dev/mtdblock2: hw={
  222. boardVer=1
  223. nic0Addr=081079e3fd78
  224. nic1Addr=0810117830c9
  225. wlan={
  226. 0={
  227. macAddr=081079e3fd79
  228. macAddr1=081079e3fd80
  229. macAddr2=081079e3fd81
  230. macAddr3=081079e3fd82
  231. macAddr4=081079e3fd83
  232. macAddr5=081079e3fd84
  233. macAddr6=08101781,
  234.                 [apmib_load_conf3:300][time:8]
  235. WARNNING: last 2048 bytes of /dev/mtdblock2: S_A=000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000,
  236.                 [apmib_load_conf3:307][time:8]
  237. WARNNING: try again, cnt:1,
  238.                 [apmib_load_conf3:313][time:8]
  239. ERROR: Invalid checksum of current setting! for HW from /dev/mtdblock2, offset:6, len:5522,
  240.                 [apmib_load_conf3:294][time:8]
  241. WARNNING: first 2048 bytes of /dev/mtdblock2: hw={
  242. boardVer=1
  243. nic0Addr=081079e3fd78
  244. nic1Addr=0810117830c9
  245. wlan={
  246. 0={
  247. macAddr=081079e3fd79
  248. macAddr1=081079e3fd80
  249. macAddr2=081079e3fd81
  250. macAddr3=081079e3fd82
  251. macAddr4=081079e3fd83
  252. macAddr5=081079e3fd84
  253. macAddr6=08101781,
  254.                 [apmib_load_conf3:300][time:8]
  255. WARNNING: last 2048 bytes of /dev/mtdblock2: S_A=000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000,
  256.                 [apmib_load_conf3:307][time:8]
  257. ERROR: can't read args from /dev/mtdblock2. set->nam:HW, set->len:2317, set->offset:0,
  258.                 [apmib_load_conf4:537][time:8]
  259. Initialize AP HW MIB failed for writeDefault(), LINE:1667!
  260. [writeDefault:1708:flash.c][writeDefault:1708]

  262. [writeDefault:1713:flash.c],
  263. [writeDefault:2277:1],
  264. [writeDefault:2277:1],
  265. !!!!!olddefconf.ssid=NETCORE_2.4G
  266. !!!!!olddefconf.ssid=NETCORE_2.4G
  267. !!!!!olddefconf.ssid=NETCORE_2.4G-VAP1
  268. !!!!!olddefconf.ssid=NETCORE_2.4G-VAP2
  269. !!!!!olddefconf.ssid=NETCORE_2.4G-VAP3
  270. !!!!!olddefconf.ssid=NETCORE_2.4G-VAP4
  271. !!!!!olddefconf.ssid=NETCORE_2.4G
  272. !!!!!olddefconf.ssid=NETCORE_2.4G
  273. !!!!!olddefconf.ssid=NETCORE_2.4G-VAP1
  274. !!!!!olddefconf.ssid=NETCORE_2.4G-VAP2
  275. !!!!!olddefconf.ssid=NETCORE_2.4G-VAP3
  276. !!!!!olddefconf.ssid=NETCORE_2.4G-VAP4
  277. ##############num:1677760575###############
  278. ###################ac_ip:169.254.96.65####################
  279. ipadd is 192.168.1.254
  280. [writeDefault:4339:flash.c][writeDefault:4339]

  282. @@@@@@@@@apmib_update set 1 @@@@@@@@@@@@@@@
  283. @@@@@@[flash_write_by_dev,152]/dev/mtdblock2
  284. [writeDefault:4360:flash.c]type:1, ret:1
  285. @@@@@@@@@apmib_update set 2 @@@@@@@@@@@@@@@
  286. @@@@@@[flash_write_by_dev,152]/dev/mtdblock2
  287. [writeDefault:4365:flash.c]type:2, ret:1
  288. @@@@@@@@@apmib_update set 4 @@@@@@@@@@@@@@@
  289. @@@@@@[flash_write_by_dev,152]/dev/mtdblock2
  290. [writeDefault:4369:flash.c]type:4, ret:1
  291. [writeDefault:4451:flash.c][writeDefault:4451]

  293. [writeDefault:4508:flash.c][writeDefault:4508], success of writeDefault

  295. ERROR: section:HW, load default*************************************,
  296.                 [normal_reset_fun_of_section:571][722:factory_args.sh, 721:/bin/sh][time:10]
  297. 0072700727007270072700727normal_reset_fun_of_section
  298. ERROR: Will reboot*************************************,
  299.                 [apmib_init:3325][722:factory_args.sh, 721:/bin/sh][time:10]

  301. The system is going down NOW !!
  302. Sending SIGTERM to all processes.
  303. Terminated
  304. 733
  305. wlan_check.sh: do nothing......
  306. version_new=Netcore(NAP840+)CN-V1.2.42856,2018.04.03 10:16.

  308. /proc/wps_btn_delay: cannot create
  309. killall: xhcatv: no process killed
  310. killall: multi_ppp: no process killed
  311. killall: igmpproxy: no process killed
  312. killall: udhcpc: no process killed
  313. wlanapp_sh:1942:@@@@@@@####;wlan0
  314. ~~~~~~~~~~~~~~~~~~~~~~ssid=NETCORE_2.4G
  315. initWlan[6477]stanum=0
  316. MIB_HW_TX_POWER_CCK_A=2e2e2e2d2d2d2d2d2d2c2c2c2c2c
  317. MIB_HW_TX_POWER_CCK_A_new=2e2e2e2d2d2d2d2d2d2c2c2c2c2c
  318. MIB_HW_TX_POWER_HT40_1S_A=333232323231313130302f2f2e2e
  319. MIB_HW_TX_POWER_HT40_1S_An=333232323231313130302f2f2e2e
  320. MIB_HW_TX_POWER_HT20=0f0f0f0f0f0f0f0f0f0f0f0f0f0f
  321. MIB_HW_TX_POWER_HT20n=0f0f0f0f0f0f0f0f0f0f0f0f0f0f
  322. MIB_HW_TX_POWER_DIFF_OFDM=0102010101010101010102010202
  323. MIB_HW_TX_POWER_DIFF_OFDMn=0102010101010101010102010202
  324. initWlan:6172,wlan0-vxd is off
  325. initWlan:6172,wlan0-va0 is off
  326. initWlan:6172,wlan0-va1 is off
  327. initWlan:6172,wlan0-va2 is off
  328. initWlan:6172,wlan0-va3 is off
  329. cmd=/bin/brctl addif br0 eth0
  330. cmd=/sbin/ifconfig eth0 up
  331. qvlan_set_write 7855  41 0 0 0   0 0 0 0 0 0
  332. qvlan_set_write 7855  44 -1 -1 0         0 0 0 0 0 0
  333. brctl setfd br0 0
  334. brctl stp br0 0
  335. Se▒Bummer, could not run '/sbin/swapoff': No such file or directory
  336. Please stand by while rebooting the system.

  338. Booting...

  340. @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
  341. @
  342. @ chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize
  343. @ 0000000h 0ef4017h 00000efh 0000040h 0000017h 0000000h 0000017h 0800000h
  344. @ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName
  345. @ 0010000h 0000080h 0001000h 0000800h 0000100h 0000010h 000003eh W25Q64
  346. @
  347. @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
  348. Reboot Result from Watchdog Timeout!

  350. ---RealTek(RTL8196D)at 2018.04.03-10:30+0800 v1.6b [16bit](579MHz)
  351. ====no sys signature at 00010000!cs6c[cr6c]
  352. ret=0  sys signature at 00010000!
  353. ====no sys signature at 00020000!cs6c[cr6c]
  354. ret=0  sys signature at 00020000!
  355. ret=2  sys signature at 00030000!
  356. checksum sum 0, p_kernel_img 80500000, 00117882
  357. no rootfs signature at 000E0000!
  358. no rootfs signature at 000F0000!
  359. no rootfs signature at 00130000!
  360. no rootfs signature at 000E1000!
  361. no rootfs signature at 000E2000!
  362. no rootfs signature at 000E3000!
  363. no rootfs signature at 000E4000!
  364. no rootfs signature at 000E5000!
  365. no rootfs signature at 000E6000!
  366. no rootfs signature at 000E7000!
  367. no rootfs signature at 000E8000!
  368. no rootfs signature at 000E9000!
  369. no rootfs signature at 000EA000!
  370. no rootfs signature at 000EB000!
  371. no rootfs signature at 000EC000!
  372. no rootfs signature at 000ED000!
  373. no rootfs signature at 000EE000!
  374. no rootfs signature at 000EF000!
  375. no rootfs signature at 000F1000!
  376. no rootfs signature at 000F2000!
  377. no rootfs signature at 000F3000!
  378. no rootfs signature at 000F4000!
  379. no rootfs signature at 000F5000!
  380. no rootfs signature at 000F6000!
  381. no rootfs signature at 000F7000!
  382. no rootfs signature at 000F8000!
  383. no rootfs signature at 000F9000!
  384. no rootfs signature at 000FA000!
  385. no rootfs signature at 000FB000!
  386. no rootfs signature at 000FC000!
  387. no rootfs signature at 000FD000!
  388. no rootfs signature at 000FE000!
  389. no rootfs signature at 000FF000!
  390. no rootfs signature at 00100000!
  391. no rootfs signature at 00101000!
  392. no rootfs signature at 00102000!
  393. no rootfs signature at 00103000!
  394. no rootfs signature at 00104000!
  395. no rootfs signature at 00105000!
  396. no rootfs signature at 00106000!
  397. no rootfs signature at 00107000!
  398. no rootfs signature at 00108000!
  399. no rootfs signature at 00109000!
  400. no rootfs signature at 0010A000!
  401. no rootfs signature at 0010B000!
  402. no rootfs signature at 0010C000!
  403. no rootfs signature at 0010D000!
  404. no rootfs signature at 0010E000!
  405. no rootfs signature at 0010F000!
  406. no rootfs signature at 00110000!
  407. no rootfs signature at 00111000!
  408. no rootfs signature at 00112000!
  409. no rootfs signature at 00113000!
  410. no rootfs signature at 00114000!
  411. no rootfs signature at 00115000!
  412. no rootfs signature at 00116000!
  413. no rootfs signature at 00117000!
  414. no rootfs signature at 00118000!
  415. no rootfs signature at 00119000!
  416. no rootfs signature at 0011A000!
  417. no rootfs signature at 0011B000!
  418. no rootfs signature at 0011C000!
  419. no rootfs signature at 0011D000!
  420. no rootfs signature at 0011E000!
  421. no rootfs signature at 0011F000!
  422. no rootfs signature at 00120000!
  423. no rootfs signature at 00121000!
  424. no rootfs signature at 00122000!
  425. no rootfs signature at 00123000!
  426. no rootfs signature at 00124000!
  427. no rootfs signature at 00125000!
  428. no rootfs signature at 00126000!
  429. no rootfs signature at 00127000!
  430. no rootfs signature at 00128000!
  431. no rootfs signature at 00129000!
  432. no rootfs signature at 0012A000!
  433. no rootfs signature at 0012B000!
  434. no rootfs signature at 0012C000!
  435. no rootfs signature at 0012D000!
  436. no rootfs signature at 0012E000!
  437. no rootfs signature at 0012F000!
  438. no rootfs signature at 00131000!
  439. no rootfs signature at 00132000!
  440. no rootfs signature at 00133000!
  441. no rootfs signature at 00134000!
  442. no rootfs signature at 00135000!
  443. no rootfs signature at 00136000!
  444. no rootfs signature at 00137000!
  445. no rootfs signature at 00138000!
  446. no rootfs signature at 00139000!
  447. no rootfs signature at 0013A000!
  448. no rootfs signature at 0013B000!
  449. no rootfs signature at 0013C000!
  450. no rootfs signature at 0013D000!
  451. no rootfs signature at 0013E000!
  452. no rootfs signature at 0013F000!
  453. no rootfs signature at 00140000!
  454. no rootfs signature at 00141000!
  455. no rootfs signature at 00142000!
  456. no rootfs signature at 00143000!
  457. no rootfs signature at 00144000!
  458. no rootfs signature at 00145000!
  459. no rootfs signature at 00146000!
  460. no rootfs signature at 00147000!
  461. no rootfs signature at 00148000!
  462. no rootfs signature at 00149000!
  463. no rootfs signature at 0014A000!
  464. no rootfs signature at 0014B000!
  465. no rootfs signature at 0014C000!
  466. no rootfs signature at 0014D000!
  467. no rootfs signature at 0014E000!
  468. no rootfs signature at 0014F000!
  469. Jump to image start=0x80500000...
  470. decompressing kernel:
  471. Uncompressing Linux... done, booting the kernel.
  472. done decompressing kernel.
  473. start address: 0x80003400
  474. Realtek WLAN driver - version 1.6 (2013-02-21)
  475. Adaptivity function - version 7.1


  478. #######################################################
  479. SKB_BUF_SIZE=2408 MAX_SKB_NUM=480
  480. #######################################################




  485. Probing RTL8186 10/100 NIC-kenel stack size order[3]...
  486. chip name: 8196C, chip revid: 0
  487. NOT YET
  488. eth0 added. vid=1 Member port 0x1...
  489. eth1 added. vid=2 Member port 0x10...
  490. eth2 added. vid=1 Member port 0x2...
  491. eth3 added. vid=1 Member port 0x4...
  492. eth4 added. vid=1 Member port 0x8...
  493. eth5 added. vid=1 Member port 0x0...
  494. [peth0] added, mapping to [eth1]...
  495. zlr Creating 7 MTD partitions on "flash_bank_1":
  496. WARNNING:       find rootfs in:0x150000,        real_offset:150000
  497. 0x000000000000-0x000000150000 : "boot+cfg+linux"
  498. 0x000000150000-0x000000740000 : "root fs"
  499. 0x0000007c0000-0x000000800000 : "parm flash"
  500. 0x000000000000-0x000000800000 : "all"
  501. 0x000000740000-0x0000007c0000 : "jffs2"
  502. 0x000000000000-0x0000000d0000 : "linux up"
  503. 0x0000000d0000-0x000000800000 : "rootfs up"
  504. Realtek FastPath:v1.03
  505. serial console detected.  Disabling virtual terminals.
  506. init started:  BusyBox v1.00-pre8 (2014.08.14-10:37+0000) multi-call binary
  507. Bummer, could not run '/etc/init.d/rcS': No such file or directory


  510. BusyBox v1.00-pre8 (2014.08.14-10:37+0000) Built-in shell (msh)
  511. Enter 'help' for a list of built-in commands.

  513. mount -t jffs2 /dev/mtdblock4 /tmp/para status:0
  514. 725
  515. wlan_check.sh: do nothing......
  516. version_new=Netcore(NAP840+)CN-V1.2.42856,2018.04.03 10:16.

  518. /proc/wps_btn_delay: cannot create
  519. killall: xhcatv: no process killed
  520. killall: multi_ppp: no process killed
  521. killall: igmpproxy: no process killed
  522. killall: udhcpc: no process killed
  523. wlanapp_sh:1942:@@@@@@@####;wlan0
  524. ~~~~~~~~~~~~~~~~~~~~~~ssid=NETCORE_2.4G
  525. initWlan[6477]stanum=0
  526. MIB_HW_TX_POWER_CCK_A=2e2e2e2d2d2d2d2d2d2c2c2c2c2c
  527. MIB_HW_TX_POWER_CCK_A_new=2e2e2e2d2d2d2d2d2d2c2c2c2c2c
  528. MIB_HW_TX_POWER_HT40_1S_A=333232323231313130302f2f2e2e
  529. MIB_HW_TX_POWER_HT40_1S_An=333232323231313130302f2f2e2e
  530. MIB_HW_TX_POWER_HT20=0f0f0f0f0f0f0f0f0f0f0f0f0f0f
  531. MIB_HW_TX_POWER_HT20n=0f0f0f0f0f0f0f0f0f0f0f0f0f0f
  532. MIB_HW_TX_POWER_DIFF_OFDM=0102010101010101010102010202
  533. MIB_HW_TX_POWER_DIFF_OFDMn=0102010101010101010102010202
  534. initWlan:6172,wlan0-vxd is off
  535. initWlan:6172,wlan0-va0 is off
  536. initWlan:6172,wlan0-va1 is off
  537. initWlan:6172,wlan0-va2 is off
  538. initWlan:6172,wlan0-va3 is off
  539. cmd=/bin/brctl addif br0 eth0
  540. cmd=/sbin/ifconfig eth0 up
  541. qvlan_set_write 7855  41 0 0 0   0 0 0 0 0 0
  542. qvlan_set_write 7855  44 -1 -1 0         0 0 0 0 0 0
  543. brctl setfd br0 0
  544. brctl stp br0 0
  545. brctl addif br0 wlan0
  546. /sbin/ifconfig wlan0 0.0.0.0
  547. [PHY_REG_8192E_extlna]
  548. [AGC_TAB_8192E_extlna]
  549. [RadioA_8192E_extlna]
  550. [RadioB_8192E_extlna]
  551. ifconfig br0 hw ether 08:10:11:00:03:04
  552. /sbin/ifconfig br0 192.168.1.254
  553. wlanapp_sh:1942:@@@@@@@####;wlan0 wlan0-va0 wlan0-va1 wlan0-va2 wlan0-va3 wlan0-vxd
  554. Register to wlan0
  555. iwcontrol RegisterPID to (wlan0)
  556. SIOCDELRT: No such process
  557. argc:3 [dhcpc_sh:296:dhcpc.c]
  558. open logs file
  559. options_strings:c:fbH:h:i:np:qr:s:x:v:ld:a:u:
  560. udhcp client (v0.9.9-pre) started
  561. script is:  /usr/share/udhcpc/br0.sh
  562. IEEE 802.11f (IAPP) using interface br0 (v1.8)
  563. @@@@@@rand=18
  564. SIOCDELRT: No such process
  565. SIOCDELRT: No such process
  566. doamin=0
  567. [set_default_route_sh:295:set_default_gw.c], not impl...
  568. #########08:10:11:00:03:04########
  569. #########host:772#############################
  570. ##############reply_ip:169.254.3.4######################
  571. SIOCSIFFLAGS: Cannot assign requested address
  572. ========================END init.sh===============================
  573. SIGNAl 17;reset_flag[0]
  574. /bin/udp_ap_handle [interface] [file version path] [server ip]MIMO : NAP840+
  575. check_udp_ap_handle[430]:udp_ap_handle running.....
  576. killall: boa: no process killed
  577. killall: boa: no process killed
  578. /proc/sys/net/ipv4/ip_conntrack_max: cannot create
  579. [run_webs_server_by_execv:46:restart_webs.c]
  580. Starting Protocol Module: HTTP Server                      ... OK
  581. /proc/sys/net/core/hot_list_length: cannot create
  582. # Auto channel choose ch:5 2nd:0

  584. translate_uri:222;Mozilla/5.0 (Windows NT 10.0; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/86.0.4240.198 Safari/537.36
  585. translate_uri:254
复制代码


r809f编程器论坛

本帖子中包含更多资源

您需要 登录 才可以下载或查看，没有账号？立即注册

×

相关帖子

我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2022-8-27 08:53 | 显示全部楼层
本帖最后由 yanzihui 于 2022-8-27 08:54 编辑

NAP840+编程器固件
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2022-11-6 15:59 | 显示全部楼层
有好几个地方有MAC，并且是一批，wan、lan、wlan的。是不是只改了一处？

我有个NB1200GC的，备份了编程器固件，看了一下，不过没去改mac刷机，瞎猜的。

点评

PerNet
你这个是路由器不是AP吧  详情 回复 发表于 2022-11-11 19:44
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

PerNet
 楼主| 发表于 2022-11-11 19:44 | 显示全部楼层
oujinlai 发表于 2022-11-6 15:59
有好几个地方有MAC，并且是一批，wan、lan、wlan的。是不是只改了一处？

我有个NB1200GC的，备份了编程 ...

你这个是路由器不是AP吧
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2022-11-11 20:12 | 显示全部楼层
不是，ap也差不多吧
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-19 21:15

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱：js12377 | @jischina.com.cn 举报电话：025-88802724 本站不良内容举报信箱：68610888@qq.com 举报电话：0519-86695797

快速回复 返回顶部 返回列表