The WAN port and LAN port of the second-level router are connected to the LAN port of the first-level router at the same time, and the PC is connected to the Lan of the L.N. of the L.N. of the L.R. and the Lan port of the L.N

Mr_Sir

Hardware: The first-level route is an X86 soft router, and the second-level route is an H3C NX30
The NX30wan port and LAN port are connected to the LAN of the L1 router at the same time, and then the PC uses the NX30 as the gateway from the LAN of the L1 router, and the flow will be cut off when surfing the Internet
The primary route has DHCP enabled, the secondary route has been turned off on NX30, and the DHCP PC is manually configured to connect to the secondary route

Ask for advice what is the problem and how to solve it

loveyjc236

Remove the H3C WAN port network cable and you'll be fine

Mr_Sir

loveyjc236 Posted on 2023-1-27 14:41
Remove the H3C WAN port network cable and you'll be fine

Wouldn't H3C have no network?

tianlijia831030

Mr_Sir Posted on 2023-1-27 15:30
Wouldn't H3C have no network?

LAN mouth is next, how can there be no network, what is the point of connecting both ports?