找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 5784|回复: 13

WHR-HP-G300N 国行编程器备份 未验证

[复制链接]
发表于 2013-9-5 23:20 | 显示全部楼层 |阅读模式
本来想换Flash改Ubnt,本来都成功运行了,手贱,补焊锡的时候把焊盘弄掉一堆,不折腾了,板子扔掉。
这个是原Flash备份,国行,刷官方版合作版DD,自行验证,能不能用看运气吧。




本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

×
我的恩山、我的无线 The best wifi forum is right here.
发表于 2013-9-7 07:13 | 显示全部楼层
这个固件是好的嘛
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2013-9-27 02:32 | 显示全部楼层
正要用 下来看看
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2013-11-12 23:02 | 显示全部楼层
有人试过刷到G300N V2上吗?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2013-12-21 19:49 | 显示全部楼层
下载回来试试看
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2013-12-21 19:49 | 显示全部楼层
下载回来试试看
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2014-8-10 20:52 | 显示全部楼层
{:soso_e127:}有没有验证过,这个是否可用
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2014-8-12 21:48 | 显示全部楼层
也太贵了吧,固件分两份,变下载这个固件就要6个积分
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2014-10-28 11:27 | 显示全部楼层
正好用得著,先收下了
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-4-7 15:01 | 显示全部楼层
怎么这么贵的啊。。。。。。。。。。。。。。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-4-7 15:04 | 显示全部楼层
骗子来的,只不过是国行网站直接能下载的DD-WRT,根本就不是编程的固件版本
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-4-9 20:15 | 显示全部楼层
这个可以改mac地址吗,改了能启动吗?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-4-11 00:31 | 显示全部楼层
下载回来试试看
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-7-8 23:24 | 显示全部楼层
BUFFALO WZR-HP-G300NH2救砖,求助各位大神


  路由器在线升级固件死机,路由器变砖,拆开路由器,接上TTL线,用SecureCRT软件连接路由器,能读出路由器信息,把电脑网卡修改成192.168.11.2,255.255.255.0,192.168.1.1,参考各位大神的各种办法,用tftp32,tftp自动上传软件等软件,网线连接WAN边上网线插口,一直无法上传数据,请教哪位大神,帮我想想办法,或者发一个编程器的固件给我,我看内部有两个储存器,不知道哪一个储存器是刷坏的?谢谢了!

BUFFALO U-BOOT Ver 1.11
  == CPU:400MHz, DDR:400MHz, AHB:200MHz ==
PB93 (ar7241 - Virian) U-boot
DRAM:  64 MB
WAN port disabling: done
Top of RAM usable for U-Boot at: 84000000
Reserving 267k for U-Boot at: 83fbc000
Reserving 192k for malloc() at: 83f8c000
Reserving 44 Bytes for Board Info at: 83f8bfd4
Reserving 36 Bytes for Global Data at: 83f8bfb0
Reserving 128k for boot params() at: 83f6bfb0
Stack Pointer at: 83f6bf98
Now running in RAM - U-Boot at: 83fbc000
flash bank #0 found 16 MB flash [MX25L128-45E, blk:0x10000, sectors:256]
flash bank #1 found 16 MB flash [MX25L128-45E, blk:0x10000, sectors:256]
Flash: 32 MB
In:    serial
Out:   serial
Err:   serial
Memory Test
uboot use  83F6BFB0 - 84000000
Memory Test start(80000000) end(83F00000) size(03F00000)
Pattern 00000000  Writing...  Reading...
Memory Test OK
### buf_ver=[1.11] U-Boot Ver.=[1.11]
### build_date(env)=[Feb  9 2012 - 19:38:20] build_date(bin)=[Feb  9 2012 - 19:38:20]
ag7240_enet_initialize...
Reading MAC Address from ENV(0x83f8c2f8)
No valid address in Flash. Using fixed address
Virian MDC CFG Value ==> 4
: cfg1 0x7 cfg2 0x7014
eth0: 02:aa:bb:cc:dd:1a
eth0 up
Virian MDC CFG Value ==> 4
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0  02:AA:BB:CCD:1A
, eth1  00:03:7F:09:0B:AD

dup 1 speed 1000

tftp server(receive) go, waiting:4[sec]
Load address: 0x81f00000

TftpServer Timeout;
no file was loaded.
change bootargs
console=ttyS0,115200 root=31:03 rootfstype=jffs2 init=/sbin/init mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1152k@384k(uImage),6592k@1536k(rootfs),64k@320k(ART),64k@8128k(properties) mem=64M product_rev=1 UART=1
## Booting image at bf060000 ...
   Image Name:   Linux Rootfs Combined Image
   Created:      2013-02-07  13:41:04 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    24100800 Bytes = 23 MB
   Load Address: 80002000
   Entry Point:  8020d000
   Verifying Checksum ... crc32_fw: bf060040 - c075bfff (len:016fbfc0) calc...
crc32_fw: range1 bf060040 - bfffffff, range2 be000000 - be75bfff
Bad Data CRC
# LED(0x10000) Blink[2] (Please press 'Ctrl+c' to stop)



接上TTL线,用SecureCRT软件连接路由器,能读出路由器信息,把电脑网卡修改成192.168.11.2,255.255.255.0,192.168.1.1,参考各位大神的各种办法,用tftp32,tftp自动上传软件等软件,网线连接WAN边上网线插口,一直无法上传数据,请教哪位大神,帮我想想办法,或者发一个编程器的固件给我,我看内部有两个储存器,不知道哪一个储存器是刷坏的?谢谢了@
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-3-29 18:43

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表