找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 18348|回复: 5

接好了TTL的线但无法中断CFE的启动过程,机器是创维HC2600,广东有线U宽频的定制机

[复制链接]
发表于 2014-1-6 21:42 | 显示全部楼层 |阅读模式
本帖最后由 我真名叫WuKaoSh 于 2014-1-6 21:46 编辑

题外话:固件是最新版本的,各位在使用广东有线的U宽频的话,可于以下内网网址下载升级固件,最大的改进是该固件已经提供自动登录中国移动的家庭宽带功能,不再需要自己做WEB认证

http://5.5.5.5
以上网址提供了创维HC2600及同洲的固件。

这些天都想折腾这机器,我的机器是创维HC2600,是个一体机,带CABLE MODEM功能,路由器功能及机顶盒功能
路由器的CPU配置是BCM5356CO,我见过有某些HC2600的机器是BCM5357,Flash大小是8MB SPI,内存是DDR 32MB的, 我已经接好了TTL的线,但用过CTRL+C的方法,无法中断CFE的启动过程,请教各位如何才可以终止它?

其实我折腾这机器,原因是创维为广东有线写的固件实在太烂了,在基于BCM公版固件的基础上开发的,但是阉割了十分多的功能,而且有些功能还写得不完整
因此我在想,能否把TOMATO折腾刷入该机? 请各位帮帮忙吧,先行谢谢各位~~~~

附上TTL的启动过程日志, 从TTL日志可得知,连接该机发射出的CMCC的信号的话,会带有一个DHCP OPTION 60的字段值,该值是GCableSSID


  1. Decompressing...done


  2. CFE version 5.100.138.23 based on BBP 1.0.37 for BCM947XX (32bit,SP,LE)
  3. Build Date: Mon Dec 17 14:53:44 CST 2012 (mark@ubuntu)
  4. Copyright (C) 2000-2008 Broadcom Corporation.

  5. Init Arena
  6. Init Devs.
  7. Boot partition size = 131072(0x20000)
  8. Found an ST compatible serial flash with 128 64KB blocks; total size 8MB
  9. et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.23
  10. CPU type 0x19749: 300MHz
  11. Tot mem: 32768 KBytes

  12. CFE mem:    0x80700000 - 0x80799130 (626992)
  13. Data:       0x8072EF50 - 0x807321A0 (12880)
  14. BSS:        0x807321A0 - 0x80733130 (3984)
  15. Heap:       0x80733130 - 0x80797130 (409600)
  16. Stack:      0x80797130 - 0x80799130 (8192)
  17. Text:       0x80700000 - 0x8072EF50 (192336)

  18. Device eth0:  hwaddr 5C-C6-D0-70-E3-4E, ipaddr 192.168.88.254, mask 255.255.255.0
  19.         gateway not set, nameserver not set
  20. Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
  21. Loading: Failed.
  22. Could not load :: Timeout occured
  23. verify trx data success.
  24. Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
  25. Loading: ..... 2443256 bytes read
  26. Entry at 0x80001000
  27. Closing network.
  28. Starting program at 0x80001000
  29. Linux version 2.6.21.5 (lzg@ubuntu) (gcc version 4.2.3) #129 Thu Oct 31 20:46:43 CST 2013
  30. Found an ST compatible serial flash with 128 64KB blocks; total size 8MB
  31. Serial flash device: name SFLASH 8192 kB, id 0x0000 size 8192KB
  32. prom init
  33. CPU revision is: 00019749
  34. get sflash size=8388608 B
  35. Total Flash size: 8192K with 128 sectors
  36. Flash split 8 : AuxFS[720896]
  37. Determined physical RAM map:
  38. memory: 02000000 @ 00000000 (usable)
  39. On node 0 totalpages: 8192
  40.   DMA zone: 32 pages used for memmap
  41.   DMA zone: 0 pages reserved
  42.   DMA zone: 4064 pages, LIFO batch:0
  43.   Normal zone: 32 pages used for memmap
  44.   Normal zone: 4064 pages, LIFO batch:0
  45. Built 1 zonelists.  Total pages: 8128
  46. Kernel command line: root=31:2 ro noinitrd console=ttyS0,115200
  47. brcm mips: enabling icache and dcache...
  48. Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
  49. Primary data cache 32kB, 4-way, linesize 32 bytes.
  50. Synthesized TLB refill handler (22 instructions).
  51. Synthesized TLB load handler fastpath (34 instructions).
  52. Synthesized TLB store handler fastpath (34 instructions).
  53. Synthesized TLB modify handler fastpath (33 instructions).
  54. PID hash table entries: 128 (order: 7, 512 bytes)
  55. CPU: BCM53572 rev 1 at 300 MHz
  56. Using 150.000 MHz high precision timer.
  57. Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  58. Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  59. Memory: 29948k/32768k available (1958k kernel code, 2820k reserved, 329k data, 96k init, 0k highmem)
  60. KLOB Pool 1 Initialized: 1048576 bytes <0x80300000 ... 0x80400000>
  61. Calibrating delay loop... 148.99 BogoMIPS (lpj=74496)
  62. Mount-cache hash table entries: 512
  63. NET: Registered protocol family 16
  64. PCI: no core
  65. PCI: no core
  66. PCI: Fixing up bus 0
  67. BLOG v2.1 Initialized
  68. Time: MIPS clocksource has been installed.
  69. NET: Registered protocol family 2
  70. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  71. TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  72. TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  73. TCP: Hash tables configured (established 1024 bind 1024)
  74. TCP reno registered
  75. squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
  76. squashfs: LZMA suppport for slax.org by jro
  77. JFFS2 version 2.2. (C) 2001-2006 Red Hat, Inc.
  78. io scheduler noop registered (default)
  79. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  80. serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
  81. PPP generic driver version 2.4.2
  82. NET: Registered protocol family 24
  83. pflash: found no supported devices
  84. sflash: squash filesystem with lzma found at block 995
  85. Creating 9 MTD partitions on "sflash":
  86. 0x00000000-0x00020000 : "boot"
  87. 0x00020000-0x00700000 : "linux"
  88. 0x000f8e00-0x00700000 : "rootfs"
  89. 0x00700000-0x007b0000 : "auxfs"
  90. 0x007b0000-0x007c0000 : "log"
  91. 0x007c0000-0x007d0000 : "backpsi"
  92. 0x007d0000-0x007e0000 : "sp"
  93. 0x007e0000-0x007f0000 : "psi"
  94. 0x007f0000-0x00800000 : "nvram"
  95. brcmboard: brcm_board_init entry
  96. PCI: Setting latency timer of device 0000:00:02.0 to 64
  97. bcmsw: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.23
  98. eth0: MAC Address: 5C:C6:D0:70:E3:4E
  99. eth1: MAC Address: 5C:C6:D0:70:E3:4E
  100. eth2: MAC Address: 5C:C6:D0:70:E3:4E
  101. eth3: MAC Address: 5C:C6:D0:70:E3:4E
  102. eth4: MAC Address: 5C:C6:D0:70:E3:4E
  103. Mirror/redirect action on
  104. u32 classifier
  105.     input device check on
  106.     Actions configured
  107. TCP cubic registered
  108. NET: Registered protocol family 1
  109. KLOB extended to 2 pools
  110. NET: Registered protocol family 17
  111. Initializing MCPD Module
  112. Ebtables v2.0 registered
  113. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  114. All bugs added by David S. Miller <davem@redhat.com>
  115. VFS: Mounted root (squashfs filesystem) readonly.
  116. Freeing unused kernel memory: 96k freed
  117. KLOB extended to 3 pools
  118. init started:  BusyBox v1.00 (2013.09.27-06:07+0000) multi-call binary


  119. BusyBox v1.00 (2013.09.27-06:07+0000) Built-in shell (msh)
  120. Enter 'help' for a list of built-in commands.


  121. Loading drivers and kernel modules...

  122. pktflow: module license 'Proprietary' taints kernel.
  123. Broadcom Packet Flow Cache  Char Driver v2.1 Sep 13 2012 06:37:17 Registered<242>
  124. NBUFF v1.0 Initialized
  125. Broadcom Packet Flow Cache learning via BLOG enabled.
  126. Created Proc FS /procfs/fcache
  127. Broadcom Packet Flow Cache registered with netdev chain
  128. Constructed Broadcom Packet Flow Cache v2.1 Sep 13 2012 06:37:16
  129. eth0 Link DOWN
  130. eth1 Link DOWN
  131. eth2 Link DOWN
  132. eth3 Link DOWN
  133. eth4 Link DOWN
  134. eth0 Link UP 100 mbps full duplex
  135. eth1 Link UP 100 mbps full duplex
  136. wl_module_init: passivemode set to 0x0
  137. PCI: Setting latency timer of device 0000:00:01.0 to 64
  138. KLOB extended to 4 pools
  139. wl0: Broadcom BCM4329 802.11 Wireless Controller 5.100.138.23 (WLTEST)
  140. 164
  141. 167

  142. ===== Release Version 4.04L.CT_02.v1.7 (build timestamp 131031_2046) =====

  143. Adjust WLAN Configuration, has configuration [1], num [4], defaultnum [4]
  144. interface eth0_1 does not exist!
  145. SIOCGIFFLAGS: No such device
  146. device eth1 entered promiscuous mode
  147. br2: port 1(eth1) entering learning state
  148. br2: topology change detected, propagating
  149. br2: port 1(eth1) entering forwarding state
  150. device eth2 entered promiscuous mode
  151. br2: port 2(eth2) entering learning state
  152. br2: topology change detected, propagating
  153. br2: port 2(eth2) entering forwarding state
  154. device eth3 entered promiscuous mode
  155. br2: port 3(eth3) entering learning state
  156. br2: topology change detected, propagating
  157. br2: port 3(eth3) entering forwarding state
  158. device eth4 entered promiscuous mode
  159. br2: port 4(eth4) entering learning state
  160. br2: topology change detected, propagating
  161. br2: port 4(eth4) entering forwarding state
  162. ssk:error:9.728:rutPMap_addAvailableInterface:793:avail InterfaceReference InternetGatewayDevice.WANDevice.3.WANConnectionDevice.1.WANIPConnection.1 already exists
  163. interface eth0_1 does not exist!
  164. interface eth0_1 does not exist!
  165. SIOCGIFFLAGS: No such device
  166. ssk:error:10.060:rutPMap_addAvailableInterface:793:avail InterfaceReference InternetGatewayDevice.WANDevice.3.WANConnectionDevice.1.WANIPConnection.2 already exists
  167. entered, iidStack={}
  168. --------------system boots up-----------------

  169. -------Enable bandwidth set-----------------
  170. WLmngr Daemon is running
  171. optarg=0 shmId=0
  172. (ssk) EthernetWan eth0 link up
  173. device eth0_1 entered promiscuous mode
  174. br1: port 1(eth0_1) entering learning state
  175. br1: topology change detected, propagating
  176. br1: port 1(eth0_1) entering forwarding state
  177. All services associated with eth0_1 is activated.
  178. WEBUI Operation WPS Type is NONE, interface number is [1]
  179. WEBUI Operation WPS Type is NONE, interface number is [2]
  180. WEBUI Operation WPS Type is NONE, interface number is [3]
  181. WEBUI Operation WPS Type is NONE, interface number is [4]
  182. device wl0 is not a slave of br1
  183. interface wl0.1 does not exist!
  184. interface wl0.2 does not exist!
  185. interface wl0.3 does not exist!
  186. ssk:error:11.977:cmsObj_set:474:set of InternetGatewayDevice.Layer3Forwarding.Forwarding.{i}. {5} failed
  187. ssk:error:11.977:rutPmap_doPolicyRoutingOnWanIfc:1687:Failed to set L3ForwardingEntryObject, ret = 9003
  188. ip_tables: (C) 2000-2006 Netfilter Core Team
  189. KLOB extended to 5 pools
  190. Setting SSID: "CMCC"
  191. Setting SSID: "USER_710EB0"
  192. Setting SSID: "USER_3"
  193. Setting SSID: "USER_4"
  194. Netfilter messages via NETLINK v0.30.
  195. wlctl: Unsupported
  196. nf_conntrack version 0.5.0 (256 buckets, 2048 max)
  197. ssk:error:14.851:rutNtwk_getActiveDnsIp:441:No active dns info found.
  198. ssk:error:14.857:rutNtwk_getActiveDnsIp:441:No active dns info found.
  199. ssk:error:14.863:rutNtwk_getActiveDnsIp:441:No active dns info found.
  200. ssk:error:14.864:rutNtwk_getActiveDnsIp:441:No active dns info found.
  201. ssk:error:14.870:rutNtwk_getActiveDnsIp:441:No active dns info found.
  202. ssk:error:14.876:rutNtwk_getActiveDnsIp:441:No active dns info found.
  203. RTNETLINK answers: No such process
  204. RTNETLINK answers: Invalid argument
  205. RTNETLINK answers: Invalid argument
  206. All services associated with eth0_2 is activated.
  207. ssk:error:15.484:rutNtwk_getActiveDnsIp:441:No active dns info found.
  208. ssk:error:15.490:rutNtwk_getActiveDnsIp:441:No active dns info found.
  209. Save IPOE Config successful!
  210. ->IPoEStatus : 1
  211. Save IPOE Config successful!
  212. ->[wlmngr_doQoSKLOB extended to 6 pools
  213. ][2090]debug here : apply Qos Setting on ifn [wl0]
  214. ->[wlmngr_doQoS][2090]debug here : apply Qos Setting on ifn [wl0.1]
  215. device wl0 entered promiscuous mode
  216. device wl0.1 entered promiscuous mode
  217. device wl0.2 entered promiscuous mode
  218. device wl0.3 entered promiscuous mode
  219. ACS Policy:
  220. Bg Noise threshold: 0
  221. Interference threshold: 100
  222. Channel Scoring Weights:
  223.          BSS: -1
  224.          BUSY: 0
  225.          INTF: 0
  226.          INTFADJ: 0
  227.          FCS: 0
  228.          TXPWR: 0
  229.          BGNOISE:br1: port 2(wl0) entering learning state
  230. 0
  231.          CNS: 1
  232. wlbr1: topology change detected, propagating
  233. 0: Operation notbr1: port 2(wl0) entering forwarding state
  234. supported
  235. br2: port 5(wl0.1) entering learning state
  236. br2: topology change detected, propagating
  237. br2: port 5(wl0.1) entering forwarding state
  238. ACSD >>acsd_chanim_init(72): failed to set chanim_sample_periodacsd: scan in progress ...
  239. acsd: scan in progress ...
  240. Reaped 1228
  241. UPnP daemon is ready to run
  242. acsd: scan in progress ...
  243. acsd: scan in progress ...
  244. acsd: scan in progress ...
  245. acsd: scan in progress ...
  246. acsd: scan in progress ...
  247. acsd: scan in progress ...
  248. acsd: scan in progress ...
  249. acsd: scan in progress ...
  250. acsd: scan in progress ...
  251. acsd: scan in progress ...
  252. acsd: scan in progress ...
  253. wl0: Operation not supported
  254. ACSD >>acsd_chanim_query(500): failed to get chanim resultsret code: -1
  255. dhcpc:error:21.707:udhcpc:628:No lease time with ACK, using 20 second lease
  256. [early_auth][557] logging from stb without permission checked!
  257. httpd:error:21.975:rutNtwk_getActiveDnsIp:441:No active dns info found.
  258. httpd:error:21.976:rutNtwk_getActiveDnsIp:441:No active dns info found.
  259. [http_sock_connect][417]Illegal HostName!
  260. [cmcc_auth_main][1211]http_sock_connect failed!
  261. [http_sock_connect][417]Illegal HostName!
  262. [cmcc_auth_main][1211]http_sock_connect failed!
  263. [http_sock_connect][417]Illegal HostName!
  264. [cmcc_auth_main][1211]http_sock_connect failed!
  265. dhcpc:error:31.709:udhcpc:628:No lease time with ACK, using 20 second lease
  266. [http_sock_connect][417]Illegal HostName!
  267. [cmcc_auth_main][1211]http_sock_connect failed!
  268. [http_sock_connect][417]Illegal HostName!
  269. [cmcc_auth_main][1211]http_sock_connect failed!
  270. dhcpc:error:41.711:udhcpc:628:No lease time with ACK, using 20 second lease
  271. httpd:error:42.121:rutNtwk_getActiveDnsIp:441:No active dns info found.
  272. httpd:error:42.122:rutNtwk_getActiveDnsIp:441:No active dns info found.
  273. dhcpc:error:51.712:udhcpc:628:No lease time with ACK, using 20 second lease
  274. [http_sock_connect][417]Illegal HostName!
  275. [cmcc_auth_main][1211]http_sock_connect failed!
  276. dhcpc:error:61.713:udhcpc:628:No lease time with ACK, using 20 second lease
  277. [early_auth][557] logging from stb without permission checked!
  278. httpd:error:62.185:rutNtwk_getActiveDnsIp:441:No active dns info found.
  279. httpd:error:62.186:rutNtwk_getActiveDnsIp:441:No active dns info found.
  280. dhcpc:error:71.714:udhcpc:628:No lease time with ACK, using 20 second lease
  281. dhcpc:error:81.716:udhcpc:628:No lease time with ACK, using 20 second lease
  282. httpd:error:82.275:rutNtwk_getActiveDnsIp:441:No active dns info found.
  283. httpd:error:82.275:rutNtwk_getActiveDnsIp:441:No active dns info found.
  284. dhcpc:error:91.718:udhcpc:628:No lease time with ACK, using 20 second lease
  285. [http_sock_connect][417]Illegal HostName!
  286. [cmcc_auth_main][1211]http_sock_connect failed!
  287. dhcpc:error:101.719:udhcpc:628:No lease time with ACK, using 20 second lease
  288. [early_auth][557] logging from stb without permission checked!
  289. httpd:error:102.340:rutNtwk_getActiveDnsIp:441:No active dns info found.
  290. httpd:error:102.341:rutNtwk_getActiveDnsIp:441:No active dns info found.
  291. dhcpc:error:111.720:udhcpc:628:No lease time with ACK, using 20 second lease
  292. dhcpc:error:121.721:udhcpc:628:No lease time with ACK, using 20 second lease
  293. dhcpc:error:131.722:udhcpc:628:No lease time with ACK, using 20 second lease
  294. dhcpc:error:141.723:udhcpc:628:No lease time with ACK, using 20 second lease
  295. dhcpc:error:151.724:udhcpc:628:No lease time with ACK, using 20 second lease
  296. dhcpc:error:161.726:udhcpc:628:No lease time with ACK, using 20 second lease
  297. [http_sock_connect][417]Illegal HostName!
  298. [cmcc_auth_main][1211]http_sock_connect failed!
  299. dhcpc:error:171.727:udhcpc:628:No lease time with ACK, using 20 second lease
  300. dhcpc:error:181.729:udhcpc:628:No lease time with ACK, using 20 second lease
  301. dhcpc:error:191.731:udhcpc:628:No lease time with ACK, using 20 second lease
  302. dhcpc:error:201.732:udhcpc:628:No lease time with ACK, using 20 second lease
  303. dhcpc:error:211.733:udhcpc:628:No lease time with ACK, using 20 second lease
  304. dhcpc:error:221.734:udhcpc:628:No lease time with ACK, using 20 second lease
  305. dhcpc:error:231.736:udhcpc:628:No lease time with ACK, using 20 second lease
  306. dhcpc:error:241.737:udhcpc:628:No lease time with ACK, using 20 second lease
  307. [http_sock_connect][417]Illegal HostName!
  308. [cmcc_auth_main][1211]http_sock_connect failed!
  309. dhcpc:error:251.738:udhcpc:628:No lease time with ACK, using 20 second lease
  310. dhcpc:error:261.739:udhcpc:628:No lease time with ACK, using 20 second lease
  311. dhcpc:error:271.741:udhcpc:628:No lease time with ACK, using 20 second lease
  312. dhcpc:error:281.743:udhcpc:628:No lease time with ACK, using 20 second lease
  313. dhcpc:error:291.745:udhcpc:628:No lease time with ACK, using 20 second lease
  314. dhcpc:error:301.746:udhcpc:628:No lease time with ACK, using 20 second lease
  315. dhcpc:error:311.748:udhcpc:628:No lease time with ACK, using 20 second lease
  316. dhcpc:error:321.750:udhcpc:628:No lease time with ACK, using 20 second lease
  317. dhcpc:error:331.752:udhcpc:628:No lease time with ACK, using 20 second lease
  318. dhcpc:error:341.753:udhcpc:628:No lease time with ACK, using 20 second lease
  319. [http_sock_connect][417]Illegal HostName!
  320. [cmcc_auth_main][1211]http_sock_connect failed!
  321. dhcpc:error:351.755:udhcpc:628:No lease time with ACK, using 20 second lease
  322. dhcpc:error:361.756:udhcpc:628:No lease time with ACK, using 20 second lease
  323. dhcpc:error:371.757:udhcpc:628:No lease time with ACK, using 20 second lease
  324. dhcpc:error:381.758:udhcpc:628:No lease time with ACK, using 20 second lease
  325. dhcpc:error:391.759:udhcpc:628:No lease time with ACK, using 20 second lease
  326. dhcpc:error:401.761:udhcpc:628:No lease time with ACK, using 20 second lease
  327. dhcpc:error:411.763:udhcpc:628:No lease time with ACK, using 20 second lease
  328. dhcpc:error:421.764:udhcpc:628:No lease time with ACK, using 20 second lease
  329. dhcpc:error:431.765:udhcpc:628:No lease time with ACK, using 20 second lease
  330. dhcpc:error:441.766:udhcpc:628:No lease time with ACK, using 20 second lease
  331. dhcpc:error:451.767:udhcpc:628:No lease time with ACK, using 20 second lease
  332. dhcpc:error:461.768:udhcpc:628:No lease time with ACK, using 20 second lease
  333. dhcpc:error:471.769:udhcpc:628:No lease time with ACK, using 20 second lease
  334. [http_sock_connect][417]Illegal HostName!
  335. [cmcc_auth_main][1211]http_sock_connect failed!
  336. dhcpc:error:481.770:udhcpc:628:No lease time with ACK, using 20 second lease
  337. dhcpc:error:491.771:udhcpc:628:No lease time with ACK, using 20 second lease
  338. dhcpc:error:501.772:udhcpc:628:No lease time with ACK, using 20 second lease
  339. dhcpc:error:511.774:udhcpc:628:No lease time with ACK, using 20 second lease
  340. dhcpc:error:521.776:udhcpc:628:No lease time with ACK, using 20 second lease
  341. dhcpc:error:531.777:udhcpc:628:No lease time with ACK, using 20 second lease
  342. dhcpc:error:541.778:udhcpc:628:No lease time with ACK, using 20 second lease
  343. dhcpc:error:551.780:udhcpc:628:No lease time with ACK, using 20 second lease
  344. dhcpc:error:561.781:udhcpc:628:No lease time with ACK, using 20 second lease
  345. dhcpc:error:571.783:udhcpc:628:No lease time with ACK, using 20 second lease
  346. dhcpc:error:581.785:udhcpc:628:No lease time with ACK, using 20 second lease
  347. dhcpc:error:591.787:udhcpc:628:No lease time with ACK, using 20 second lease
  348. dhcpc:error:601.789:udhcpc:628:No lease time with ACK, using 20 second lease
  349. dhcpc:error:611.791:udhcpc:628:No lease time with ACK, using 20 second lease
  350. [http_sock_connect][417]Illegal HostName!
  351. [cmcc_auth_main][1211]http_sock_connect failed!
  352. dhcpc:error:621.794:udhcpc:628:No lease time with ACK, using 20 second lease
  353. dhcpc:error:631.795:udhcpc:628:No lease time with ACK, using 20 second lease
  354. dhcpc:error:641.796:udhcpc:628:No lease time with ACK, using 20 second lease
  355. dhcpc:error:651.797:udhcpc:628:No lease time with ACK, using 20 second lease
  356. dhcpc:error:661.798:udhcpc:628:No lease time with ACK, using 20 second lease
  357. dhcpc:error:671.800:udhcpc:628:No lease time with ACK, using 20 second lease
  358. dhcpc:error:681.801:udhcpc:628:No lease time with ACK, using 20 second lease
  359. dhcpc:error:691.802:udhcpc:628:No lease time with ACK, using 20 second lease
  360. dhcpc:error:701.804:udhcpc:628:No lease time with ACK, using 20 second lease
  361. dhcpc:error:711.805:udhcpc:628:No lease time with ACK, using 20 second lease
  362. dhcpc:error:721.807:udhcpc:628:No lease time with ACK, using 20 second lease
  363. dhcpc:error:731.808:udhcpc:628:No lease time with ACK, using 20 second lease
  364. dhcpc:error:741.810:udhcpc:628:No lease time with ACK, using 20 second lease
  365. dhcpc:error:751.812:udhcpc:628:No lease time with ACK, using 20 second lease
  366. dhcpc:error:761.814:udhcpc:628:No lease time with ACK, using 20 second lease
  367. dhcpc:error:771.816:udhcpc:628:No lease time with ACK, using 20 second lease
  368. [http_sock_connect][417]Illegal HostName!
  369. [cmcc_auth_main][1211]http_sock_connect failed!
  370. dhcpc:error:781.817:udhcpc:628:No lease time with ACK, using 20 second lease
  371. dhcpc:error:791.819:udhcpc:628:No lease time with ACK, using 20 second lease
  372. dhcpc:error:801.821:udhcpc:628:No lease time with ACK, using 20 second lease
  373. dhcpc:error:811.822:udhcpc:628:No lease time with ACK, using 20 second lease
  374. dhcpc:error:821.823:udhcpc:628:No lease time with ACK, using 20 second lease
  375. dhcpc:error:831.826:udhcpc:628:No lease time with ACK, using 20 second lease
  376. dhcpc:error:841.827:udhcpc:628:No lease time with ACK, using 20 second lease
  377. ->dhcp type 3
  378. [1] ->dhcp clear original vendor info.
  379. [1] -> dhcp pading length = 67  remain len = 1
  380. [1] -> dhcp vendor class identifier append : GCableSSID
  381. dhcpc:error:851.840:udhcpc:628:No lease time with ACK, using 20 second lease
  382. dhcpc:error:861.841:udhcpc:628:No lease time with ACK, using 20 second lease
  383. dhcpc:error:871.843:udhcpc:628:No lease time with ACK, using 20 second lease
  384. dhcpc:error:881.844:udhcpc:628:No lease time with ACK, using 20 second lease
  385. dhcpc:error:891.845:udhcpc:628:No lease time with ACK, using 20 second lease
  386. dhcpc:error:901.847:udhcpc:628:No lease time with ACK, using 20 second lease
  387. dhcpc:error:911.848:udhcpc:628:No lease time with ACK, using 20 second lease
  388. dhcpc:error:921.849:udhcpc:628:No lease time with ACK, using 20 second lease
  389. dhcpc:error:931.850:udhcpc:628:No lease time with ACK, using 20 second lease
  390. dhcpc:error:941.851:udhcpc:628:No lease time with ACK, using 20 second lease
  391. dhcpc:error:951.856:udhcpc:628:No lease time with ACK, using 20 second lease
  392. dhcpc:error:961.857:udhcpc:628:No lease time with ACK, using 20 second lease
  393. [http_sock_connect][417]Illegal HostName!
  394. [cmcc_auth_main][1211]http_sock_connect failed!
  395. dhcpc:error:971.859:udhcpc:628:No lease time with ACK, using 20 second lease
  396. dhcpc:error:981.860:udhcpc:628:No lease time with ACK, using 20 second lease
  397. dhcpc:error:991.862:udhcpc:628:No lease time with ACK, using 20 second lease
  398. dhcpc:error:1.864:udhcpc:628:No lease time with ACK, using 20 second lease
  399. dhcpc:error:11.865:udhcpc:628:No lease time with ACK, using 20 second lease
  400. ->dhcp type 1
  401. [1] ->dhcp clear original vendor info.
  402. [1] -> dhcp pading length = 56  remain len = 1
  403. [1] -> dhcp vendor class identifier append : GCableSSID
  404. ->dhcp type 3
  405. [1] ->dhcp clear original vendor info.
  406. [1] -> dhcp pading length = 56  remain len = 1
  407. [1] -> dhcp vendor class identifier append : GCableSSID
  408. dhcpc:error:21.889:udhcpc:628:No lease time with ACK, using 20 second lease
  409. dhcpc:error:31.891:udhcpc:628:No lease time with ACK, using 20 second lease
  410. ssk:error:41.400:rutNtwk_getActiveDnsIp:441:No active dns info found.
  411. KLOB extended to 7 pools
  412. dhcpc:error:41.894:udhcpc:628:No lease time with ACK, using 20 second lease
  413. dhcpc:error:51.895:udhcpc:628:No lease time with ACK, using 20 second lease
  414. dhcpc:error:61.896:udhcpc:628:No lease time with ACK, using 20 second lease
  415. dhcpc:error:71.897:udhcpc:628:No lease time with ACK, using 20 second lease
  416. dhcpc:error:81.899:udhcpc:628:No lease time with ACK, using 20 second lease
  417. dhcpc:error:91.901:udhcpc:628:No lease time with ACK, using 20 second lease
  418. dhcpc:error:101.902:udhcpc:628:No lease time with ACK, using 20 second lease
  419. dhcpc:error:111.903:udhcpc:628:No lease time with ACK, using 20 second lease
  420. dhcpc:error:121.904:udhcpc:628:No lease time with ACK, using 20 second lease
  421. dhcpc:error:131.905:udhcpc:628:No lease time with ACK, using 20 second lease
  422. dhcpc:error:141.907:udhcpc:628:No lease time with ACK, using 20 second lease
复制代码
我的恩山、我的无线 The best wifi forum is right here.
 楼主| 发表于 2014-1-6 21:48 | 显示全部楼层
补充,HC2600的拆机图可进入此查看

http://forum.eepw.com.cn/thread/238006/1
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2014-6-22 21:47 | 显示全部楼层
你好兄弟能提供这机器的固件吗?我这是HI3716的
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-1-8 00:28 来自手机 | 显示全部楼层
兄弟能刷不,我刚刚换机顶盒也是hc2600看硬件应该是一样的!备份编程器固件分析cfe!期待能成功!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-2-8 15:47 | 显示全部楼层
我家也是用这个机顶盒,期待成功破解。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-6-16 15:47 | 显示全部楼层
可以刷成TOMATO?怎么操作?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-3-29 01:00

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表