找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 2562|回复: 20

[k3] K3不启动求救

[复制链接]
发表于 2019-11-12 12:45 | 显示全部楼层 |阅读模式
K3不能启动:看是否有救?
TTL信息:
Digital core power voltage set to 1.05V
Decompressing...done


CFE version 7.14.131.47 (r629548) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Tue Mar 21 21:48:23 CST 2017 (jenkins@SOHO-OPWRT)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 400 MHz
Warning: invalid DDR setting of 0 MHz ignored. DDR frequency will be set to 400 MHz.
Warning: invalid CPU setting of 0 MHz ignored. armclock frequency will be set to 800 MHz.
CPU type 0x0: 800MHz
Tot mem: 524288 KBytes

CFE mem:    0x00F00000 - 0x017CB47C (9221244)
Data:       0x00F638DC - 0x00F63E64 (1416)
BSS:        0x00F63E70 - 0x00FC947C (415244)
Heap:       0x00FC947C - 0x017C947C (8388608)
Stack:      0x017C947C - 0x017CB47C (8192)
Text:       0x00F00000 - 0x00F57A40 (358976)

Loader:raw Filesys:raw Dev:nflash0.os File: Optionsnull)
Loading: ... 1595796 bytes read
Entry at 0x00008000
Starting program at 0x00008000
Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.9.20 (hamster@Hamster-PC) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3899+1-dc4eae7a8c) ) #0 SMP Wed May 3 14:40:37 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: PHICOMM K3
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] percpu: Embedded 12 pages/cpu @c6bd8000 s17868 r8192 d23092 u49152
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130816
[    0.000000] Kernel command line: console=ttyS0,115200
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Memory: 514892K/524288K available (3469K kernel code, 105K rwdata, 904K rodata, 228K init, 293K bss, 9396K reserved, 0K cma-reserved, 393216K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xc8800000 - 0xff800000   ( 880 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc036b6d8   (3470 kB)
[    0.000000]       .init : 0xc044f000 - 0xc0488000   ( 228 kB)
[    0.000000]       .data : 0xc0488000 - 0xc04a2640   ( 106 kB)
[    0.000000]        .bss : 0xc04a2640 - 0xc04ebaa0   ( 294 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x0a530000
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
[    0.000016] sched_clock: 64 bits at 400MHz, resolution 2ns, wraps every 4398046511103ns
[    0.000041] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns
[    0.000075] Switching to timer-based delay loop, resolution 2ns
[    0.000294] Calibrating delay loop (skipped), value calculated using timer frequency.. 800.00 BogoMIPS (lpj=4000000)
[    0.000310] pid_max: default: 32768 minimum: 301
[    0.000407] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000419] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001047] CPU: Testing write buffer coherency: ok
[    0.001418] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001490] Setting up static identity map for 0x82a0 - 0x82d4
[    0.003511] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.003634] Brought up 2 CPUs
[    0.003659] SMP: Total of 2 processors activated (1600.00 BogoMIPS).
[    0.003670] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
[    0.003676] CPU: This may indicate a broken bootloader or firmware.
[    0.006047] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.006081] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.006271] pinctrl core: initialized pinctrl subsystem
[    0.006756] NET: Registered protocol family 16
[    0.007581] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.043129] clocksource: Switched to clocksource arm_global_timer
[    0.044686] NET: Registered protocol family 2
[    0.045412] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.045447] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[    0.045474] TCP: Hash tables configured (established 1024 bind 1024)
[    0.045559] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.045602] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.045827] NET: Registered protocol family 1
[    0.047245] Crashlog allocated RAM at address 0x3f00000
[    0.048010] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.053103] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.053128] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.055592] bounce: pool size: 64 pages
[    0.055614] io scheduler noop registered
[    0.055623] io scheduler deadline registered (default)
[    0.056433] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.057326] console [ttyS0] disabled
[    0.057408] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 18, base_baud = 7812500) is a 16550
[    0.509254] console [ttyS0] enabled
[    0.513382] 18000400.serial: ttyS1 at MMIO 0x18000400 (irq = 18, base_baud = 7812500) is a 16550
[    0.523530] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
[    0.529917] nand: Samsung NAND 128MiB 3,3V 8-bit
[    0.534585] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    0.542209] iproc_nand 18028000.nand: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-4
[    0.552172] Scanning device for bad blocks
[    0.575791] random: fast init done
[    0.800123] Bad eraseblock 385 at 0x000003020000
[    0.805444] Bad eraseblock 386 at 0x000003040000
[    0.810748] Bad eraseblock 387 at 0x000003060000
[    0.894629] Bad eraseblock 515 at 0x000004060000
[    0.979551] Bad eraseblock 643 at 0x000005060000
[    1.176342] Bad eraseblock 952 at 0x000007700000
[    1.217766] Bad eraseblock 1011 at 0x000007e60000
[    1.225669] Bad eraseblock 1016 at 0x000007f00000
[    1.231076] Bad eraseblock 1017 at 0x000007f20000
[    1.238332] Bad eraseblock 1021 at 0x000007fa0000
[    1.243992] Bad eraseblock 1023 at 0x000007fe0000
[    1.324103] mtd_read error while parsing (offset: 0x3000000): -74
[    1.330938] mtd_read error while parsing (offset: 0x3020000): -74
[    1.337762] mtd_read error while parsing (offset: 0x3040000): -74
[    1.344595] mtd_read error while parsing (offset: 0x3060000): -74
[    1.526896] mtd_read error while parsing (offset: 0x5060000): -74
[    1.724595] random: crng init done
[    1.749112] mtd_read error while parsing (offset: 0x7700000): -74
[    1.795848] mtd_read error while parsing (offset: 0x7E60000): -74
[    1.805427] mtd_read error while parsing (offset: 0x7F00000): -74
[    1.812259] mtd_read error while parsing (offset: 0x7F20000): -74
[    1.821149] mtd_read error while parsing (offset: 0x7FA0000): -74
[    1.830374] 6 bcm47xxpart partitions found on MTD device brcmnand.0
[    1.836656] Creating 6 MTD partitions on "brcmnand.0":
[    1.841827] 0x000000000000-0x000000080000 : "boot"
[    1.847820] 0x000000080000-0x000000180000 : "nvram"
[    1.853803] 0x000000180000-0x000000200000 : "phicomm"
[    1.859906] 0x000000200000-0x000008000000 : "firmware"
[    1.867206] 0x00000020001c-0x0000003b2780 : "linux"
[    1.873298] 0x0000003b2780-0x000008000000 : "rootfs"
[    1.880001] mtd: device 5 (rootfs) set to be root filesystem
[    1.886155] 1 squashfs-split partitions found on MTD device rootfs
[    1.892394] 0x000002440000-0x000008000000 : "rootfs_data"
[    1.901273] libphy: Fixed MDIO Bus: probed
[    1.905488] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[    1.911673] bcma: bus0: Found chip with id 53030, rev 0x00 and package 0x00
[    1.918751] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
[    1.927492] bcma: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x05, class 0x0)
[    1.936375] bcma: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x04, class 0x0)
[    1.944532] bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[    1.953102] bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[    1.961687] bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[    1.970285] bcma: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x07, class 0x0)
[    1.978762] bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[    1.987440] bcma: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[    1.996153] bcma: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x07, class 0x0)
[    2.004868] bcma: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x07, class 0x0)
[    2.015054] bcma: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x07, class 0x0)
[    2.023591] bcma: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x07, class 0x0)
[    2.032141] bcma: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
[    2.040502] bcma: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
[    2.048677] bcma: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[    2.058180] bcma: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[    2.069066] bcma: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x08, class 0x0)
[    2.077291] bcma: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[    2.087032] bcma: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[    2.096565] bcma: bus0: Flash type not supported
[    2.103290] bgmac_bcma bcma0:3: Found PHY addr: 0
[    2.108040] bgmac_bcma bcma0:3: Invalid MAC addr: 00:00:00:00:00:00
[    2.114405] bgmac_bcma bcma0:3: Using random MAC: 2e:ae:c2:f2:50:01
[    2.122841] b53_common: found switch: BCM53012, rev 0
[    2.128914] bgmac_bcma bcma0:4: Found PHY addr: 0
[    2.133732] bgmac_bcma bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
[    2.140027] bgmac_bcma bcma0:4: Using random MAC: 02:c3:16:41:b6:92


我的恩山、我的无线 The best wifi forum is right here.
 楼主| 发表于 2019-11-12 12:47 | 显示全部楼层
之前正常启动看到启动日志中有挂载分区错误,恢复到官改后刷入网上分享的 3 4 5 分区。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-11-12 13:03 | 显示全部楼层
直接spi启动格盘刷cfe,然后nand启动刷系统完美解决

点评

请教: 加了SPI FLASH后,只能SPI启动,不短接141也使用SPI启动,拿掉SPI后不能启动可能是哪的问题? 这是没有换NAND前,换了后也是一样的情况?  详情 回复 发表于 2019-11-17 15:51
请问:spi启动怎么个盘?  详情 回复 发表于 2019-11-12 14:15
请教: 是买哪种 W25Q64 W25Q64FVSIG 64MBit 8MB闪存 再加个土豪金 CH341A编程器是否可以自己买来刷CFE?  详情 回复 发表于 2019-11-12 13:22
看来买SPI FLASH 自己焊,救了。  详情 回复 发表于 2019-11-12 13:14
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2019-11-12 13:14 | 显示全部楼层
山东王老师 发表于 2019-11-12 13:03
直接spi启动格盘刷cfe,然后nand启动刷系统完美解决

看来买SPI FLASH 自己焊,救了。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2019-11-12 13:22 | 显示全部楼层
山东王老师 发表于 2019-11-12 13:03
直接spi启动格盘刷cfe,然后nand启动刷系统完美解决

请教:
是买哪种
W25Q64 W25Q64FVSIG 64MBit 8MB闪存
再加个土豪金 CH341A编程器是否可以自己买来刷CFE?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-11-12 14:15 | 显示全部楼层
山东王老师 发表于 2019-11-12 13:03
直接spi启动格盘刷cfe,然后nand启动刷系统完美解决

请问:spi启动怎么个盘?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-11-12 17:02 | 显示全部楼层
土豪金那个爱烧了,买个防烧的就好
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-11-12 17:03 | 显示全部楼层
zshwq5 发表于 2019-11-12 13:22
请教:
是买哪种
W25Q64 W25Q64FVSIG 64MBit 8MB闪存

spi芯片你说的这几个都行,买拆机的就行几毛钱一个
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-11-12 17:04 | 显示全部楼层
douhao1423 发表于 2019-11-12 14:15
请问:spi启动怎么个盘?

140或者141 en脚对地就是spi启动

点评

打错字了,是格盘。 就是说原来nand里有固件,我用spi启动后能直接往nand里刷新的固件吗?不用擦除nand里原来的数据吗?  详情 回复 发表于 2019-11-12 17:14
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-11-12 17:04 | 显示全部楼层
zshwq5 发表于 2019-11-12 13:14
看来买SPI FLASH 自己焊,救了。

不买也行,麻烦点

点评

请私一个防烧的,感谢 另外,不买,麻烦点的是怎么操作?  详情 回复 发表于 2019-11-12 19:06
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-11-12 17:14 | 显示全部楼层
山东王老师 发表于 2019-11-12 17:04
140或者141 en脚对地就是spi启动

打错字了,是格盘。
就是说原来nand里有固件,我用spi启动后能直接往nand里刷新的固件吗?不用擦除nand里原来的数据吗?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2019-11-12 19:06 | 显示全部楼层

请私一个防烧的,感谢
另外,不买,麻烦点的是怎么操作?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-11-12 21:31 | 显示全部楼层
zshwq5 发表于 2019-11-12 19:06
请私一个防烧的,感谢
另外,不买,麻烦点的是怎么操作?

敲字符,敲得头疼,软件我是弱项

点评

购买的东西已经在等待发货了。感谢。  详情 回复 发表于 2019-11-12 21:47
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2019-11-12 21:47 | 显示全部楼层
山东王老师 发表于 2019-11-12 21:31
敲字符,敲得头疼,软件我是弱项

购买的东西已经在等待发货了。感谢。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-11-12 22:49 | 显示全部楼层
douhao1423 发表于 2019-11-12 17:14
打错字了,是格盘。
就是说原来nand里有固件,我用spi启动后能直接往nand里刷新的固件吗?不用擦除nand ...

flash -erase nflash0.brcmnand 这是命令

点评

谢谢!我试试  详情 回复 发表于 2019-11-13 09:06
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-18 10:22

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表