[推荐].新的QOS脚本.sqm-scriptes.简单易用.从此网络不再卡！

824626242

崴@崴 发表于 2015-2-25 10:44
删除mwan3所有规则正常单线拨号，应该设置pppoe-wan还是eth1
root@PP-WRT:~# ifconfig
br-lan    Link en ...

再手动输一次/etc/init.d/sqm restart，看看正常么

webxl1221

楼主，请问哪里能找到这脚本的使用说明呢，英语的也行，脚本里面很多简写，实在不懂

824626242

rapistor 发表于 2015-2-25 14:51
据说不如基于imq的石像鬼qos。
本人没用过，不太清楚。

这个qos蛮好用的 傻瓜型 没那么多设置，但的确有效。老大可以考虑集成到你的固件中啊

masterkuo

abelray 发表于 2015-2-25 17:33
这个可以限制多拨的 多个虚拟wlan口吗?

可以，添加要整形的接口就行，不限数量。

bhfeilong

顶了，测试几天，看看小效果再来汇报

abelray

经测试
多拨时候不能按每个端口 限速..即使添加了虚拟端口,也只能限制物理的端口速率
举个例子
我虚拟出3个WLAN口.另外还有原来的WLAN口 一共是4个..
我在QOS里添加好虚拟端口后.按理应该每个端口的限速都应该是叠加带宽总和的 1/4..但是这样设置后.和没有多拨的单线效果速度一样...也就是不能同时 分别限速4条...只能把物理端口的下载速率改为总的叠加带宽

tuzhis

在PandoraBox 14.09 r366 / LuCI Trunk (0.12+svn-r366) 上安装后运行提示这个,是不是内核就不支持了?

[root@Tu:/tmp]#lsmod |grep sch
sch_hfsc               13424  0
sch_ingress              944  1

[root@Tu:/tmp]#/etc/init.d/sqm restart
SQM: /usr/lib/sqm/run.sh Stopping SQM on interface: pppoe-wan
SQM: ifb associated with interface pppoe-wan: ifb4pppoe-wan
SQM: /usr/lib/sqm/stop.sh: Stopping pppoe-wan
SQM: ifb associated with interface pppoe-wan: ifb4pppoe-wan
SQM: /usr/lib/sqm/stop.sh: ifb4pppoe-wan shaper deleted
SQM: /usr/lib/sqm/stop.sh: ifb4pppoe-wan interface deleted
SQM: /usr/lib/sqm/run.sh Queue Setup Script: /usr/lib/sqm/simple.qos
SQM: ifb associated with interface pppoe-wan:
SQM: trying to create new IFB: ifb4pppoe-wan
Failed to find act_ipt. Maybe it is a built in module ?
Failed to find sch_fq_codel. Maybe it is a built in module ?
Failed to find sch_htb. Maybe it is a built in module ?
SQM: Squashing differentiated services code points (DSCP) from ingress.
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
SQM: get_limit: CURLIMIT: 1001
RTNETLINK answers: No such file or directory
SQM: get_limit: CURLIMIT: 1001
RTNETLINK answers: No such file or directory
SQM: get_limit: CURLIMIT: 1001
RTNETLINK answers: No such file or directory
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
SQM: egress shaping activated
SQM: Do not perform DSCP based filtering on ingress. (1-tier classification)
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
RTNETLINK answers: No such file or directory
SQM: get_limit: CURLIMIT: 1001
RTNETLINK answers: No such file or directory
SQM: ingress shaping activated

pokedragon

好东西，学了[catsoul=4]这真是极好的[/catsoul]

AIRSHAPE

abelray 发表于 2015-3-9 10:48
经测试
多拨时候不能按每个端口 限速..即使添加了虚拟端口,也只能限制物理的端口速率
举个例子

你的sqm怎么是中文的？求教了 英文看不懂

yech163

AIRSHAPE 发表于 2015-3-11 15:05
你的sqm怎么是中文的？求教了 英文看不懂

论坛上明月永在的op

deblued

mark

云夜紫

已进入BB软件仓库。
很好用，谢谢楼主推荐。

ghostry

楼主.如果我装上什么只配置开启和自己的带宽是什么效果?

nicholas.fq

马克，备用！感谢分享！ 如果有谁能分享一下中文LUCI就更好了。

nicholas.fq

这样的信息是运行成功了吗？？我PS没看到进程。。。


root@Cisco-Nexus7000:~# /etc/init.d/sqm restart
SQM: Trying to start/stop SQM on all interfaces.
SQM: /usr/lib/sqm/run.sh Stopping SQM on interface: pppoe-wan
SQM: ifb associated with interface pppoe-wan: ifb4pppoe-wan
SQM: /usr/lib/sqm/stop.sh: Stopping pppoe-wan
SQM: ifb associated with interface pppoe-wan: ifb4pppoe-wan
SQM: /usr/lib/sqm/stop.sh: ifb4pppoe-wan shaper deleted
SQM: /usr/lib/sqm/stop.sh: ifb4pppoe-wan interface deleted
SQM: /usr/lib/sqm/run.sh Queue Setup Script: /usr/lib/sqm/simple.qos
SQM: ifb associated with interface pppoe-wan:
SQM: trying to create new IFB: ifb4pppoe-wan
Failed to find sch_fq_codel. Maybe it is a built in module ?
SQM: Squashing differentiated services code points (DSCP) from ingress.
SQM: get_limit: CURLIMIT: 1001
SQM: get_target defaulting to auto.
SQM: get_limit: CURLIMIT: 1001
SQM: get_target defaulting to auto.
SQM: get_limit: CURLIMIT: 1001
SQM: get_target defaulting to auto.
SQM: egress shaping activated
SQM: Do not perform DSCP based filtering on ingress. (1-tier classification)
SQM: get_limit: CURLIMIT: 1001
SQM: get_target defaulting to auto.
SQM: ingress shaping activated