找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
楼主: hiboyhiboyhiboy

[2019-03-05]改华硕[N14U N54U]5G 2G的7620老毛子Padavan固件(私人云储存 aria2 QOS)

   火... [复制链接]
发表于 2019-1-1 17:47 | 显示全部楼层

@1831305901  @hmilk  @aaduck   @lxhao61
10-7的版本的miniupnpd版本是2.0,之后的版本更新到了2.1。这个应该是miniupnpd2.1的bug,我换回miniupnpd2.0后upnp就正常了。
详见:https://www.right.com.cn/forum/thread-393007-1-1.html

点评

哦,那无搞了。不知道H大固件怎么单独换miniupnpd版本。  详情 回复 发表于 2019-1-1 20:22
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-1 19:13 | 显示全部楼层
我刷了K2P的DRV1225版和杂交1231版,内存占用都在100M左右,内存空闲20多,同样是H大固件的newifi mini就有60M空闲
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-1 19:51 | 显示全部楼层
问题汇报 最新版的老毛子K2P版本存在家中的无线摄像头无法使用  1215版本正常  另外关于wan口自动拨号 老是自带掉线重播发现如下问题 第一WAN口显示为断开实际网络畅通 原因是外网检测DNS丢包导致  默认外网检测的几个DNS都存在掉包问题 阿里云尤其严重  解决方法就是更换外网检测DNS 问题解决
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-1 20:09 | 显示全部楼层
本帖最后由 sioncolors 于 2019-1-1 20:11 编辑
sioncolors 发表于 2018-12-28 21:22
固件版本:2018-12-25
设备:MT7621_7603_
BUG现象:多线程SS无法启动

BUG反馈。
固件版本:2018-12-31
设备:【MT7621_7603_7612_512M
BUG现象:最新12-31版本已不出现12-25版本固件中“启动失败, 注意检查端口是否有冲突,程序是否下载完整,10 秒后自动尝试重新启动”的问题。但是相同SS配置,未开$$多线程,使用单线程可以兲朝上网,检查google、163都可以通,开自动多线程$$后检查Google、163都不通,无法兲朝上网。
单线程$$LOG(正常兲朝上网):
Jan  1 19:54:10 【SS】: 启动 SS
Jan  1 19:54:11 【SS】: ###############启动程序###############
Jan  1 19:54:11 【Adbyby】: 下载规则:https://opt.cn2qq.com/opt-file/lazy.txt
Jan  1 19:54:11 dnsmasq[18816]: exiting on receipt of SIGTERM
Jan  1 19:54:11 dnsmasq[18970]: started, version 2.80 cachesize 1536
Jan  1 19:54:11 dnsmasq[18970]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan  1 19:54:11 dnsmasq-dhcp[18970]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 3h
Jan  1 19:54:11 dnsmasq-dhcp[18970]: DHCP, sockets bound exclusively to interface br0
Jan  1 19:54:11 dnsmasq[18970]: read /etc/hosts - 27 addresses
Jan  1 19:54:11 dnsmasq[18970]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 19:54:11 dnsmasq-dhcp[18970]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 19:54:11 【SS】: 使用 dnsmasq ,自动开启 china-dns 防止域名污染
Jan  1 19:54:11 dnsmasq[18970]: exiting on receipt of SIGTERM
Jan  1 19:54:11 dnsmasq[19053]: started, version 2.80 cachesize 1536
Jan  1 19:54:11 dnsmasq[19053]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan  1 19:54:11 dnsmasq-dhcp[19053]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 3h
Jan  1 19:54:11 dnsmasq-dhcp[19053]: DHCP, sockets bound exclusively to interface br0
Jan  1 19:54:11 dnsmasq[19053]: read /etc/hosts - 27 addresses
Jan  1 19:54:11 dnsmasq[19053]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 19:54:11 dnsmasq-dhcp[19053]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 19:54:11 【china-dns】: 找到 /opt/bin/china-dns
Jan  1 19:54:11 【china-dns】: 运行 /opt/bin/china-dns
Jan  1 19:54:13 【Adbyby】: 加载手动同步更新规则
Jan  1 19:54:13 【Adbyby】: 启动 adbyby 程序
Jan  1 19:54:15 【china-dns】: 启动成功 china-dns 1.3.2
Jan  1 19:54:15 dnsmasq[19053]: exiting on receipt of SIGTERM
Jan  1 19:54:15 dnsmasq[19194]: started, version 2.80 cachesize 1536
Jan  1 19:54:15 dnsmasq[19194]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan  1 19:54:15 dnsmasq[19194]: warning: ignoring resolv-file flag because no-resolv is set
Jan  1 19:54:15 dnsmasq-dhcp[19194]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 3h
Jan  1 19:54:15 dnsmasq-dhcp[19194]: DHCP, sockets bound exclusively to interface br0
Jan  1 19:54:15 dnsmasq[19194]: read /etc/hosts - 27 addresses
Jan  1 19:54:15 dnsmasq[19194]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 19:54:15 dnsmasq-dhcp[19194]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 19:54:16 【china-dns】: 守护进程启动
Jan  1 19:54:18 【Adbyby】: 启动成功
Jan  1 19:54:18 【iptables】: 添加8118转发规则
Jan  1 19:54:19 【Adbyby】: 设置内网(LAN)访问控制
Jan  1 19:54:21 dnsmasq[19194]: exiting on receipt of SIGTERM
Jan  1 19:54:21 dnsmasq[19357]: started, version 2.80 cachesize 1536
Jan  1 19:54:21 dnsmasq[19357]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan  1 19:54:21 dnsmasq-dhcp[19357]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 3h
Jan  1 19:54:21 dnsmasq-dhcp[19357]: DHCP, sockets bound exclusively to interface br0
Jan  1 19:54:21 dnsmasq[19357]: read /etc/hosts - 27 addresses
Jan  1 19:54:21 dnsmasq[19357]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 19:54:21 dnsmasq-dhcp[19357]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 19:54:21 【ss-redir】: 启动所有的 SS 连线, 出现的 SS 日志并不是错误报告, 只是使用状态日志, 请不要慌张, 只要系统正常你又看不懂就无视它!
Jan  1 19:54:21 【SS】: SS服务器1 设置内容:  端口:  加密方式:chacha20
Jan  1 19:54:22 【SS】: SS服务器2 设置内容:   端口:  加密方式:chacha20
Jan  1 19:54:23 【ss-local】: 启动所有的 ss-local 连线, 出现的 SS 日志并不是错误报告, 只是使用状态日志, 请不要慌张, 只要系统正常你又看不懂就无视它!
Jan  1 19:54:23 【ss-local】: 本地监听地址:192.168.123.1 本地代理端口:9888 SS服务器1 设置内容:  端口:  加密方式:chacha20
Jan  1 19:54:24 【ss-local】: 本地监听地址:192.168.123.1 本地代理端口:9866 SS服务器2 设置内容:   端口:  加密方式:chacha20
Jan  1 19:54:25 【iptables】: AD_BYBY-number:1
Jan  1 19:54:26 【iptables】: 完成添加8118规则
Jan  1 19:54:27 【Adbyby】: 【全局模式】 lazy规则更新时间 :2018-10-08 23:07:52 by:whyc / 【 11409 】条
Jan  1 19:54:27 【Adbyby】: 【全局模式】 video规则更新时间 :2018-12-15 16:30:21 by:whyc / 【 125 】条
Jan  1 19:54:27 【Adbyby】: 第三方规则行数:   行
Jan  1 19:54:27 【Adbyby】: 自定义规则行数:  49 行
Jan  1 19:54:27 【Adbyby】: 守护进程启动
Jan  1 19:54:27 【Adbyby】: 开启规则定时更新,每天00时59分,检查在线规则更新...
Jan  1 19:54:27 crond[19646]: crond (busybox 1.29.3) started, log level 8
Jan  1 19:54:27 【SS】: 启动成功
Jan  1 19:54:28 【ss-redir】: check_ip 检查 SS 服务器1090是否能用
Jan  1 19:54:29 【ss-redir】: check_network 检查 Google.com : 200
Jan  1 19:54:29 【ss-redir】: check_ip 检查 SS 服务器   【1090】 代理连接 Google.com 成功
Jan  1 19:54:30 【ss-redir】: check_ip 检查 SS 服务器1091是否能用
Jan  1 19:54:31 【ss-redir】: check_network 检查 Google.com : 200
Jan  1 19:54:31 【ss-redir】: check_ip 检查 SS 服务器   【1091】 代理连接 Google.com 成功
Jan  1 19:54:32 【ss-local】: 启动成功
Jan  1 19:54:32 【SS】: 设置 SS 的防火墙规则
Jan  1 19:54:32 【SS】: 出国模式
Jan  1 19:54:32 【SS】: 设置内网(LAN)访问控制
Jan  1 19:54:32 【SS】: DNS程序 2 模式: 0 【0走代理 1直连】
Jan  1 19:54:32 【SS】: 外网(WAN)访问控制,设置 WAN IP 转发或忽略代理中转
Jan  1 19:54:44 【adbyby】: 第一次加载规则完毕
Jan  1 19:55:16 【china-dns】: 检测:找不到 dnsmasq 转发规则, 重新添加
Jan  1 19:55:16 dnsmasq[19357]: exiting on receipt of SIGTERM
Jan  1 19:55:16 dnsmasq[20390]: started, version 2.80 cachesize 1536
Jan  1 19:55:16 dnsmasq[20390]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan  1 19:55:16 dnsmasq[20390]: warning: ignoring resolv-file flag because no-resolv is set
Jan  1 19:55:16 dnsmasq-dhcp[20390]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 3h
Jan  1 19:55:16 dnsmasq-dhcp[20390]: DHCP, sockets bound exclusively to interface br0
Jan  1 19:55:16 dnsmasq[20390]: read /etc/hosts - 27 addresses
Jan  1 19:55:16 dnsmasq[20390]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 19:55:16 dnsmasq-dhcp[20390]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 19:56:15 【SS】: 完成 SS 转发规则设置
Jan  1 19:56:15 【SS】: 正在处理 gfwlist 列表,此时 SS 未能使用,请稍候....
Jan  1 19:56:15 dnsmasq[20390]: exiting on receipt of SIGTERM
Jan  1 19:56:15 dnsmasq[20810]: started, version 2.80 cachesize 1536
Jan  1 19:56:15 dnsmasq[20810]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan  1 19:56:15 dnsmasq[20810]: warning: ignoring resolv-file flag because no-resolv is set
Jan  1 19:56:15 dnsmasq-dhcp[20810]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 3h
Jan  1 19:56:15 dnsmasq-dhcp[20810]: DHCP, sockets bound exclusively to interface br0
Jan  1 19:56:15 dnsmasq[20810]: read /etc/hosts - 27 addresses
Jan  1 19:56:15 dnsmasq[20810]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 19:56:15 dnsmasq-dhcp[20810]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 19:56:15 【SS】: 启动时使用 固件内置list规则 列表....
Jan  1 19:56:16 【SS】: GFWlist 规则 10148 行  ss-redir stop.
Jan  1 19:56:16 【SS】: 所有规则处理完毕,SS即将开始工作
Jan  1 19:56:16 【SS】: GFWlist规则目录:/tmp/ss/dnsmasq.d
Jan  1 19:56:16 dnsmasq: restart adbyby_cflist
Jan  1 19:56:16 【SS】: GFWList update 重启 dnsmasq 更新列表
Jan  1 19:56:16 dnsmasq[20810]: exiting on receipt of SIGTERM
Jan  1 19:56:16 dnsmasq[20947]: started, version 2.80 cachesize 1536
Jan  1 19:56:16 dnsmasq[20947]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan  1 19:56:16 dnsmasq[20947]: warning: ignoring resolv-file flag because no-resolv is set
Jan  1 19:56:16 dnsmasq-dhcp[20947]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 3h
Jan  1 19:56:16 dnsmasq-dhcp[20947]: DHCP, sockets bound exclusively to interface br0
Jan  1 19:56:16 dnsmasq[20947]: using 5044 more nameservers
Jan  1 19:56:16 dnsmasq[20947]: read /etc/hosts - 27 addresses
Jan  1 19:56:16 dnsmasq[20947]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 19:56:16 dnsmasq-dhcp[20947]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 19:56:16 【SS】: 启动时使用 固件内置chnroutes规则 列表....
Jan  1 19:56:16 dnsmasq[20947]: using 5045 more nameservers
Jan  1 19:56:19 【SS】: chnroutes update 重启 dnsmasq 更新列表
Jan  1 19:56:19 dnsmasq[20947]: exiting on receipt of SIGTERM
Jan  1 19:56:19 dnsmasq[20976]: started, version 2.80 cachesize 1536
Jan  1 19:56:19 dnsmasq[20976]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan  1 19:56:19 dnsmasq[20976]: warning: ignoring resolv-file flag because no-resolv is set
Jan  1 19:56:19 dnsmasq-dhcp[20976]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 3h
Jan  1 19:56:19 dnsmasq-dhcp[20976]: DHCP, sockets bound exclusively to interface br0
Jan  1 19:56:19 【SS】: SS 检查网络连接
Jan  1 19:56:19 dnsmasq[20976]: using 5044 more nameservers
Jan  1 19:56:19 dnsmasq[20976]: read /etc/hosts - 27 addresses
Jan  1 19:56:19 dnsmasq[20976]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 19:56:19 dnsmasq-dhcp[20976]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 19:56:19 dnsmasq[20976]: using 5045 more nameservers
Jan  1 19:56:20 【ss-redir】: check_network 检查 Google.com : 200
Jan  1 19:56:20 【SS】: SS 启动成功
Jan  1 19:56:20 【SS】: 启动后若发现一些网站打不开, 估计是 DNS 被污染了. 解决 DNS 被污染方法:
Jan  1 19:56:20 【SS】: ①路由 SS 设置选择其他 DNS 服务模式;
Jan  1 19:56:20 【SS】: ②电脑设置 DNS 自动获取路由 ip。检查 hosts 是否有错误规则。
Jan  1 19:56:20 【SS】: ③电脑运行 cmd 输入【ipconfig /flushdns】, 清理浏览器缓存。
Jan  1 19:56:20 【SS】: s-s 进程守护启动
Jan  1 19:56:20 【ss】: 开启规则定时更新,每天23时59分,检查在线规则更新...
Jan  1 19:56:20 【SS】: 使用 dnsmasq ,开启 china-dns 防止域名污染
Jan  1 19:56:20 crond[21048]: crond (busybox 1.29.3) started, log level 8
多线程$$LOG(无法兲朝上网):
Jan  1 19:59:52 【SS】: 启动 SS
Jan  1 19:59:52 【SS】: ###############启动程序###############
Jan  1 19:59:52 dnsmasq[25694]: exiting on receipt of SIGTERM
Jan  1 19:59:52 dnsmasq[25829]: started, version 2.80 cachesize 1536
Jan  1 19:59:52 dnsmasq[25829]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan  1 19:59:52 dnsmasq-dhcp[25829]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 3h
Jan  1 19:59:52 dnsmasq-dhcp[25829]: DHCP, sockets bound exclusively to interface br0
Jan  1 19:59:52 dnsmasq[25829]: read /etc/hosts - 27 addresses
Jan  1 19:59:52 dnsmasq[25829]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 19:59:52 dnsmasq-dhcp[25829]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 19:59:52 【china-dns】: 重新启动0
Jan  1 19:59:52 【SS】: 使用 dnsmasq ,自动开启 china-dns 防止域名污染
Jan  1 19:59:52 dnsmasq[25829]: exiting on receipt of SIGTERM
Jan  1 19:59:52 dnsmasq[25928]: started, version 2.80 cachesize 1536
Jan  1 19:59:52 dnsmasq[25928]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan  1 19:59:52 dnsmasq-dhcp[25928]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 3h
Jan  1 19:59:52 dnsmasq-dhcp[25928]: DHCP, sockets bound exclusively to interface br0
Jan  1 19:59:52 dnsmasq[25928]: read /etc/hosts - 27 addresses
Jan  1 19:59:52 dnsmasq[25928]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 19:59:52 dnsmasq-dhcp[25928]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 19:59:52 【china-dns】: 找到 /opt/bin/china-dns
Jan  1 19:59:52 【china-dns】: 运行 /opt/bin/china-dns
Jan  1 19:59:56 【china-dns】: 启动成功 china-dns 1.3.2
Jan  1 19:59:57 dnsmasq[25928]: exiting on receipt of SIGTERM
Jan  1 19:59:57 dnsmasq[26054]: started, version 2.80 cachesize 1536
Jan  1 19:59:57 dnsmasq[26054]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan  1 19:59:57 dnsmasq[26054]: warning: ignoring resolv-file flag because no-resolv is set
Jan  1 19:59:57 dnsmasq-dhcp[26054]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 3h
Jan  1 19:59:57 dnsmasq-dhcp[26054]: DHCP, sockets bound exclusively to interface br0
Jan  1 19:59:57 dnsmasq[26054]: read /etc/hosts - 27 addresses
Jan  1 19:59:57 dnsmasq[26054]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 19:59:57 dnsmasq-dhcp[26054]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 19:59:57 【china-dns】: 守护进程启动
Jan  1 20:00:02 dnsmasq[26054]: exiting on receipt of SIGTERM
Jan  1 20:00:02 dnsmasq[26097]: started, version 2.80 cachesize 1536
Jan  1 20:00:02 dnsmasq[26097]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify no-dumpfile
Jan  1 20:00:02 dnsmasq-dhcp[26097]: DHCP, IP range 192.168.123.2 -- 192.168.123.244, lease time 3h
Jan  1 20:00:02 dnsmasq-dhcp[26097]: DHCP, sockets bound exclusively to interface br0
Jan  1 20:00:02 dnsmasq[26097]: read /etc/hosts - 27 addresses
Jan  1 20:00:02 dnsmasq[26097]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 20:00:02 dnsmasq-dhcp[26097]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 20:00:02 【ss-redir】: 启动所有的 SS 连线, 出现的 SS 日志并不是错误报告, 只是使用状态日志, 请不要慌张, 只要系统正常你又看不懂就无视它!
Jan  1 20:00:02 【SS】: SS服务器1 设置内容:  端口:  加密方式:chacha20
Jan  1 20:00:04 【SS】: SS服务器2 设置内容:   端口:  加密方式:chacha20
Jan  1 20:00:05 【ss-local】: 启动所有的 ss-local 连线, 出现的 SS 日志并不是错误报告, 只是使用状态日志, 请不要慌张, 只要系统正常你又看不懂就无视它!
Jan  1 20:00:05 【ss-local】: 本地监听地址:192.168.123.1 本地代理端口:9888 SS服务器1 设置内容:  端口:  加密方式:chacha20
Jan  1 20:00:06 【ss-local】: 本地监听地址:192.168.123.1 本地代理端口:9866 SS服务器2 设置内容:   端口:  加密方式:chacha20
Jan  1 20:00:07 【SS-v2瑞】: 启动多线程ss-local,使用v2瑞随机轮询负载,占用端口1090-1093,10901-10904,109011-10914
Jan  1 20:00:10 【SS】: 检测到【4】核CPU:使用 4 线程启动
Jan  1 20:00:10 【ss-local_1_1】: 启动ss-local 1_1 设置内容:  端口:  加密方式:chacha20
Jan  1 20:00:11 【ss-local_1_2】: 启动ss-local 1_2 设置内容:  端口:  加密方式:chacha20
Jan  1 20:00:12 【ss-local_1_3】: 启动ss-local 1_3 设置内容:  端口:  加密方式:chacha20
Jan  1 20:00:13 【ss-local_1_4】: 启动ss-local 1_4 设置内容:  端口:  加密方式:chacha20
Jan  1 20:00:14 【ss-local_2_1】: 启动ss-local 2_1 设置内容:   端口:  加密方式:chacha20
Jan  1 20:00:15 【ss-local_2_2】: 启动ss-local 2_2 设置内容:   端口:  加密方式:chacha20
Jan  1 20:00:16 【ss-local_2_3】: 启动ss-local 2_3 设置内容:   端口:  加密方式:chacha20
Jan  1 20:00:17 【ss-local_2_4】: 启动ss-local 2_4 设置内容:   端口:  加密方式:chacha20
Jan  1 20:00:18 【SS】: 多线程启动完成!
Jan  1 20:00:20 【SS】: 启动成功
Jan  1 20:00:21 【ss-redir】: check_ip 检查 SS 服务器1090是否能用
Jan  1 20:00:23 【ss-redir】: check_network 检查 Google.com : 404
Jan  1 20:00:24 【ss-redir】: curl  检查 www.163.com : 000
Jan  1 20:00:24 【ss-redir】: check_ip 检查 SS 服务器   【1090】 代理连接 www.163.com 失败
Jan  1 20:00:24 【ss-redir】: check_ip 检查 SS 服务器1091是否能用
Jan  1 20:00:27 【ss-redir】: check_network 检查 Google.com : 404
Jan  1 20:00:28 【ss-redir】: curl  检查 www.163.com : 000
Jan  1 20:00:28 【ss-redir】: check_ip 检查 SS 服务器    【1091】 代理连接 www.163.com 失败
Jan  1 20:00:28 【ss-redir】: check_ip 检查两个 SS 服务器代理连接失败, 请检查配置, 10 秒后重启s-s
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-1 20:22 | 显示全部楼层
php.c 发表于 2019-1-1 17:47
@1831305901  @hmilk  @aaduck   @lxhao61
10-7的版本的miniupnpd版本是2.0,之后的版本更新到了2.1。 ...

哦,那无搞了。不知道H大固件怎么单独换miniupnpd版本。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-1 23:01 | 显示全部楼层
感谢一直更新
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 00:39 | 显示全部楼层
刚在您发布以前直接在您的盘里下载了。哈哈!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 07:04 来自手机 | 显示全部楼层
大大,有空把kcptun的客户端编译下吧,已经三个月没更新了。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 09:12 | 显示全部楼层
最新31号固件,K2和newifiD2都是自定义脚本不能应用设置保存不了。去广告图标已经启用了,也显示没有启用状态。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 09:52 | 显示全部楼层
有时候拨号后路由的各IPv6地址显示正常,设备的各IPv6地址也正常,但就是联不通IPv6网络,尤其是如果WAN的IPv6地址先获取到的话,那设备肯定是打不开IPv6网站。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 11:03 | 显示全部楼层
希望H大可以在以后的版本里增加链路聚合功能Link Aggregation,自己尝试开启kmod-bonding功能报错说没有驱动
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 11:15 | 显示全部楼层
谢谢H大又更新固件 想知道这次更新的K2P DRV版无线驱动是4.4.1.2还是4.4.2.1? 我看固件后面没有标注!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 13:31 | 显示全部楼层
感谢H大辛苦付出!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 18:17 | 显示全部楼层
本帖最后由 xinlan726 于 2019-1-2 18:23 编辑

http://opt.cn2qq.com/padavan/

MT7621_7602_7612_128M_3.4.3.9-099.trx
MT7621_7602_7612_256M_3.4.3.9-099.trx
MT7621_7602_7612_512M_3.4.3.9-099.trx

MT7621_7603_7612_128M_3.4.3.9-099.trx
MT7621_7603_7612_256M_3.4.3.9-099.trx 极路由4增强版(HC5962)刷了这个没有WIFI,WAN LAN没有反应,只有进breed重刷极路由B70--灯大和H大杂交固件才能正常使用
MT7621_7603_7612_512M_3.4.3.9-099.trx

我的极路由4增强版(HC5962)这个只能刷下面的这两个固件

https://www.right.com.cn/forum/thread-338343-1-1.html
极路由B70--灯大和H大杂交固件(2019元旦特别版本)

http://p4davan.80x86.io/download/

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有账号?立即注册

×
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2019-1-2 18:47 | 显示全部楼层
本帖最后由 lxhao61 于 2019-1-2 19:14 编辑

H大,通过几天测试,总算找到newifi3 D2(从2018-10-7版到现在2018-12-31版)软重启,一定概率直接死机问题(需断电重启)!问题出在Openvirtual**,关闭后问题就解决了。
测试环境是启用了KMS、S-S R_Server、Adbyby(Adbybylist 模式)、IPTV组播及xUPNPd(无Udpxy)、Openvirtual**应用。请验证测试后解决,谢谢!

点评

问题出在Openvirtual** 这个是啥?我没用到这个,也出现了,元旦放假这几天都挂了。回家才重新断电重启正常。  详情 回复 发表于 2019-1-2 22:42
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-3-29 20:05

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表