找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
楼主: hiboyhiboyhiboy

[2019-03-05]改华硕[N14U N54U]5G 2G的7620老毛子Padavan固件(私人云储存 aria2 QOS)

   火... [复制链接]
发表于 2015-12-28 18:28 | 显示全部楼层
不管这个还是官方的N14版,路由宝都进不了web,telnet正常
Y?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2015-12-28 18:36 | 显示全部楼层
wxjp007 发表于 2015-12-28 11:22
12-28版的ss怎么安装到内存失败呢。。。 安装到u盘是可以的

可贴日志出来看看吗

点评

Jan 1 00:00:24 连接AP: 20秒后,自动搜寻ap Jan 1 00:00:44 连接AP: 脚本完成 Jan 1 00:00:49 adbyby: 功能关闭 Jan 1 00:00:49 opt: opt内存安装,模式:2,没有百度云、迅雷 Jan 1 00:00:49 SS: 自动安  详情 回复 发表于 2015-12-28 19:10
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-12-28 18:54 | 显示全部楼层
bigandy 发表于 2015-12-26 14:27
对比一下我们用不同的解决方案实现域名解释的结果:
准备以下3个环境:
1. 北美的一台支持 UDP 转发的 SS ...

高手, 请教下如何让SS支持UDP转发呢? 自建VPS的情况下
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-12-28 19:10 | 显示全部楼层
hiboyhiboyhiboy 发表于 2015-12-28 18:36
可贴日志出来看看吗

Jan  1 00:00:24 连接AP: 20秒后,自动搜寻ap
Jan  1 00:00:44 连接AP: 脚本完成
Jan  1 00:00:49 adbyby: 功能关闭
Jan  1 00:00:49 opt: opt内存安装,模式:2,没有百度云、迅雷
Jan  1 00:00:49 SS: 自动安装(覆盖opt文件夹)
Jan  1 00:00:49 SS: opt第一次下载
Jan  1 00:00:53 NTP Client: Synchronizing time to s1a.time.edu.cn.
Jan  1 00:01:00 SS: opt解压完成
Jan  1 00:01:00 SS: 内存安装失败
Jan  1 00:01:00 SS: 关闭,自动删除dnsmasqs配置
Jan  1 00:01:00 【s-s】: stop
Jan  1 00:01:00 dnsmasq[726]: exiting on receipt of SIGTERM
Jan  1 00:01:00 dnsmasq[813]: started, version 2.75 cachesize 1536
Jan  1 00:01:00 dnsmasq[813]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Jan  1 00:01:00 dnsmasq-dhcp[813]: DHCP, IP range 192.168.1.2 -- 192.168.1.244, lease time 1d
Jan  1 00:01:00 dnsmasq-dhcp[813]: DHCP, sockets bound exclusively to interface br0
Jan  1 00:01:00 dnsmasq[813]: read /etc/hosts - 3 addresses
Jan  1 00:01:00 dnsmasq[813]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 00:01:00 dnsmasq-dhcp[813]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 00:01:00 dnsmasq[813]: using nameserver 8.8.8.8#53
Jan  1 00:01:00 dnsmasq[813]: using nameserver 114.114.114.114#53
Jan  1 00:01:00 【s-s】: flush
Jan  1 00:01:01 s-s: stop
Jan  1 00:01:01 pdnsd: stop
Jan  1 00:01:01 chinadns: stop
Jan  1 00:01:01 Pcap_DNSProxy: stop
Jan  1 00:01:04 自定义脚本1: 脚本完成
Jan  1 00:01:14 crond[921]: crond (busybox 1.23.2) started, log level 8
Jan  1 00:01:14 【opt】: opt不需更新
Jan  1 00:01:14 运行路由器启动后: 脚本完成
Jan  1 00:01:23 NTP Client: Synchronizing time to ntp.sjtu.edu.cn.
Jan  1 00:01:53 NTP Client: Synchronizing time to s1a.time.edu.cn.

点评

嗯,一样啊  发表于 2015-12-28 19:55
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-12-28 19:12 | 显示全部楼层
极1s安装后,系统时间不能同步,系统时间:Wed, Jan 1 00:25:36 2014 GMT+0800  
Jan  1 00:00:03 syslogd started: BusyBox v1.23.2
Jan  1 00:00:03 RT-N14U: firmware version: 3.4.3.9-097_12-28
Jan  1 00:00:03 kernel: klogd started: BusyBox v1.23.2 (2015-12-28 02:52:05 CST)
Jan  1 00:00:03 kernel: Linux version 3.4.110 (padavan@hms) (gcc version 4.4.7 (GCC) ) #1 Mon Dec 28 02:07:16 CST 2015
Jan  1 00:00:03 kernel: MediaTek SoC: MT7620A, RevID: 0206, RAM: DDR2, XTAL: 20MHz
Jan  1 00:00:03 kernel: CPU/OCP/SYS frequency: 580/193/193 MHz
Jan  1 00:00:03 kernel: CPU revision is: 00019650 (MIPS 24KEc)
Jan  1 00:00:03 kernel: Determined physical RAM map:
Jan  1 00:00:03 kernel:  memory: 08000000 @ 00000000 (usable)
Jan  1 00:00:03 kernel: Zone PFN ranges:
Jan  1 00:00:03 kernel:   Normal   0x00000000 -> 0x00008000
Jan  1 00:00:03 kernel: Movable zone start PFN for each node
Jan  1 00:00:03 kernel: Early memory PFN ranges
Jan  1 00:00:03 kernel:     0: 0x00000000 -> 0x00008000
Jan  1 00:00:03 kernel: On node 0 totalpages: 32768
Jan  1 00:00:03 kernel: free_area_init_node: node 0, pgdat 80349f60, node_mem_map 81000000
Jan  1 00:00:03 kernel:   Normal zone: 256 pages used for memmap
Jan  1 00:00:03 kernel:   Normal zone: 0 pages reserved
Jan  1 00:00:03 kernel:   Normal zone: 32512 pages, LIFO batch:7
Jan  1 00:00:03 kernel: Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
Jan  1 00:00:03 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
Jan  1 00:00:03 kernel: pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jan  1 00:00:03 kernel: pcpu-alloc: [0] 0
Jan  1 00:00:03 kernel: Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 32512
Jan  1 00:00:03 kernel: Kernel command line: console=ttyS0,57600n8 root=/dev/mtdblock4 rootfstype=squashfs
Jan  1 00:00:03 kernel: PID hash table entries: 512 (order: -1, 2048 bytes)
Jan  1 00:00:03 kernel: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Jan  1 00:00:03 kernel: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan  1 00:00:03 kernel: Writing ErrCtl register=0005ad20
Jan  1 00:00:03 kernel: Readback ErrCtl register=0005ad20
Jan  1 00:00:03 kernel: Memory: 126252k/131072k available (2833k kernel code, 4820k reserved, 535k data, 212k init, 0k highmem)
Jan  1 00:00:03 kernel: NR_IRQS:40
Jan  1 00:00:03 kernel: console [ttyS0] enabled
Jan  1 00:00:03 kernel: Calibrating delay loop... 385.02 BogoMIPS (lpj=770048)
Jan  1 00:00:03 kernel: pid_max: default: 32768 minimum: 301
Jan  1 00:00:03 kernel: Mount-cache hash table entries: 512
Jan  1 00:00:03 kernel: NET: Registered protocol family 16
Jan  1 00:00:03 kernel: bio: create slab <bio-0> at 0
Jan  1 00:00:03 kernel: SCSI subsystem initialized
Jan  1 00:00:03 kernel: usbcore: registered new interface driver usbfs
Jan  1 00:00:03 kernel: usbcore: registered new interface driver hub
Jan  1 00:00:03 kernel: usbcore: registered new device driver usb
Jan  1 00:00:03 kernel: Switching to clocksource MIPS
Jan  1 00:00:03 kernel: NET: Registered protocol family 2
Jan  1 00:00:03 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  1 00:00:03 kernel: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
Jan  1 00:00:03 kernel: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jan  1 00:00:03 kernel: TCP: Hash tables configured (established 4096 bind 4096)
Jan  1 00:00:03 kernel: TCP: reno registered
Jan  1 00:00:03 kernel: UDP hash table entries: 256 (order: 0, 4096 bytes)
Jan  1 00:00:03 kernel: NET: Registered protocol family 1
Jan  1 00:00:03 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan  1 00:00:03 kernel: msgmni has been set to 246
Jan  1 00:00:03 kernel: io scheduler noop registered
Jan  1 00:00:03 kernel: io scheduler bfq registered (default)
Jan  1 00:00:03 kernel: BFQ I/O-scheduler version: v7r7
Jan  1 00:00:03 kernel: Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
Jan  1 00:00:03 kernel: serial8250: ttyS0 at MMIO 0x10000c00 (irq = 12) is a 16550A
Jan  1 00:00:03 kernel: Ralink GPIO driver initialized. Number of GPIO: 73, GPIO mode: 005A171D
Jan  1 00:00:03 kernel: loop: module loaded
Jan  1 00:00:03 kernel: Ralink SPI flash driver, SPI clock: 48MHz
Jan  1 00:00:03 kernel: SPI flash chip: W25Q128FV (ef 40180000) (16384 Kbytes)
Jan  1 00:00:03 kernel: Creating 7 MTD partitions on "raspi":
Jan  1 00:00:03 kernel: 0x000000000000-0x000000030000 : "Bootloader"
Jan  1 00:00:03 kernel: 0x000000030000-0x000000040000 : "Config"
Jan  1 00:00:03 kernel: 0x000000040000-0x000000050000 : "Factory"
Jan  1 00:00:03 kernel: 0x000000050000-0x000000184020 : "Kernel"
Jan  1 00:00:03 kernel: 0x000000184020-0x000000fc0000 : "RootFS"
Jan  1 00:00:03 kernel: 0x000000fc0000-0x000001000000 : "Storage"
Jan  1 00:00:03 kernel: 0x000000050000-0x000000fc0000 : "Firmware_Stub"
Jan  1 00:00:03 kernel: tun: Universal TUN/TAP device driver, 1.6
Jan  1 00:00:03 kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Jan  1 00:00:03 kernel: Ralink APSoC Ethernet Driver v3.2.2 (raeth)
Jan  1 00:00:03 kernel: raeth: PDMA RX ring 256, PDMA TX ring 512. Max packet size 1536
Jan  1 00:00:03 kernel: raeth: NAPI support, weight 32
Jan  1 00:00:03 kernel: raeth: Byte Queue Limits (BQL) support
Jan  1 00:00:03 kernel: PPP generic driver version 2.4.2
Jan  1 00:00:03 kernel: PPP MPPE Compression module registered
Jan  1 00:00:03 kernel: NET: Registered protocol family 24
Jan  1 00:00:03 kernel: PPTP driver version 0.8.5
Jan  1 00:00:03 kernel: usbcore: registered new interface driver libusual
Jan  1 00:00:03 kernel: mtk-sd: MediaTek SD/MMC Card driver init
Jan  1 00:00:03 kernel: sdhci: Secure Digital Host Controller Interface driver
Jan  1 00:00:03 kernel: sdhci: Copyright(c) Pierre Ossman
Jan  1 00:00:03 kernel: sdhci-pltfm: SDHCI platform and OF driver helper
Jan  1 00:00:03 kernel: nf_conntrack version 0.5.0 (16384 buckets, 32768 max)
Jan  1 00:00:03 kernel: xt_time: kernel timezone is -0000
Jan  1 00:00:03 kernel: Bridge firewalling registered
Jan  1 00:00:03 kernel: gre: GRE over IPv4 demultiplexor driver
Jan  1 00:00:03 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:03 kernel: TCP: cubic registered
Jan  1 00:00:03 kernel: NET: Registered protocol family 10
Jan  1 00:00:03 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan  1 00:00:03 kernel: IPv6 over IPv4 tunneling driver
Jan  1 00:00:03 kernel: NET: Registered protocol family 17
Jan  1 00:00:03 kernel: L2TP core driver, V2.0
Jan  1 00:00:03 kernel: PPPoL2TP kernel driver, V2.0
Jan  1 00:00:03 kernel: 8021q: 802.1Q VLAN Support v1.8
Jan  1 00:00:03 kernel: ASUS NVRAM, v0.08. Available space: 61440. Integrity: OK
Jan  1 00:00:03 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
Jan  1 00:00:03 kernel: Freeing unused kernel memory: 212k freed
Jan  1 00:00:03 kernel: Algorithmics/MIPS FPU Emulator v1.5
Jan  1 00:00:03 kernel: mmc0: host does not support reading read-only switch. assuming write-enable.
Jan  1 00:00:03 kernel: mmc0: new high speed SDHC card at address 17f8
Jan  1 00:00:03 kernel: mmcblk0: mmc0:17f8 SE08G 7.21 GiB
Jan  1 00:00:03 kernel:  mmcblk0: p1
Jan  1 00:00:03 kernel: rt2860v2_ap: module license 'Proprietary' taints kernel.
Jan  1 00:00:03 kernel: APSoC AP Driver version: 2.7.2.0
Jan  1 00:00:03 kernel: usbcore: registered new interface driver usblp
Jan  1 00:00:03 kernel: Initializing USB Mass Storage driver...
Jan  1 00:00:03 kernel: usbcore: registered new interface driver usb-storage
Jan  1 00:00:03 kernel: USB Mass Storage support registered.
Jan  1 00:00:03 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  1 00:00:03 kernel: ehci-platform ehci-platform: Generic Platform EHCI Controller
Jan  1 00:00:03 kernel: ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
Jan  1 00:00:03 kernel: ehci-platform ehci-platform: irq 18, io mem 0x101c0000
Jan  1 00:00:03 kernel: ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
Jan  1 00:00:03 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan  1 00:00:03 kernel: usb usb1: Product: Generic Platform EHCI Controller
Jan  1 00:00:03 kernel: usb usb1: Manufacturer: Linux 3.4.110 ehci_hcd
Jan  1 00:00:03 kernel: usb usb1: SerialNumber: ehci-platform
Jan  1 00:00:03 kernel: hub 1-0:1.0: USB hub found
Jan  1 00:00:03 kernel: hub 1-0:1.0: 1 port detected
Jan  1 00:00:03 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan  1 00:00:03 kernel: ohci-platform ohci-platform: Generic Platform OHCI Controller
Jan  1 00:00:03 kernel: ohci-platform ohci-platform: new USB bus registered, assigned bus number 2
Jan  1 00:00:03 kernel: ohci-platform ohci-platform: irq 18, io mem 0x101c1000
Jan  1 00:00:03 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jan  1 00:00:03 kernel: usb usb2: Product: Generic Platform OHCI Controller
Jan  1 00:00:03 kernel: usb usb2: Manufacturer: Linux 3.4.110 ohci_hcd
Jan  1 00:00:03 kernel: usb usb2: SerialNumber: ohci-platform
Jan  1 00:00:03 kernel: hub 2-0:1.0: USB hub found
Jan  1 00:00:03 kernel: hub 2-0:1.0: 1 port detected
Jan  1 00:00:03 kernel: raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
Jan  1 00:00:03 kernel: raeth: HW VLAN TX offload enabled
Jan  1 00:00:03 kernel: raeth: HW Scatter/Gather TX offload enabled
Jan  1 00:00:03 kernel: mtk_esw - hw bridge: W|LLLL
Jan  1 00:00:03 kernel: device eth2.1 entered promiscuous mode
Jan  1 00:00:03 kernel: device eth2 entered promiscuous mode
Jan  1 00:00:05 kernel: mtk_esw: Link Status Changed - Port WAN Link Up
Jan  1 00:00:05 kernel: device ra0 entered promiscuous mode
Jan  1 00:00:06 kernel: br0: port 2(ra0) entered forwarding state
Jan  1 00:00:06 kernel: br0: port 1(eth2.1) entered forwarding state
Jan  1 00:00:06 dnsmasq[386]: started, version 2.75 cachesize 1024
Jan  1 00:00:06 dnsmasq[386]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Jan  1 00:00:06 dnsmasq-dhcp[386]: DHCP, IP range 192.168.2.2 -- 192.168.2.244, lease time 1d
Jan  1 00:00:06 dnsmasq-dhcp[386]: DHCP, sockets bound exclusively to interface br0
Jan  1 00:00:06 dnsmasq[386]: read /etc/hosts - 3 addresses
Jan  1 00:00:06 dnsmasq[386]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 00:00:06 dnsmasq-dhcp[386]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 00:00:06 kernel: Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
Jan  1 00:00:06 RT-N14U: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]<->[LAN/WLAN]
Jan  1 00:00:06 RT-N14U: Hardware NAT/Routing: IPv4 UDP flow offload - OFF
Jan  1 00:00:06 RT-N14U: Hardware NAT/Routing: IPv6 routes offload - OFF
Jan  1 00:00:06 DHCP MAN Client: starting on eth2.2 ...
Jan  1 00:00:06 QOS: 最大下载2560 KB/S,最大上传256 KB/S
Jan  1 00:00:06 QOS: QOS没有开启或闪存不足缺模块
Jan  1 00:00:07 crond[478]: crond (busybox 1.23.2) started, log level 8
Jan  1 00:00:07 防火墙规则: 脚本完成
Jan  1 00:00:07 pppd[501]: Plugin rp-pppoe.so loaded.
Jan  1 00:00:07 pppd[501]: RP-PPPoE plugin version 3.11 compiled against pppd 2.4.7
Jan  1 00:00:07 pppd[507]: pppd 2.4.7 started by admin, uid 0
Jan  1 00:00:07 pppd[507]: PPP session is 10181 (0x27c5)
Jan  1 00:00:07 pppd[507]: Connected to 00:22:93:5d:da:60 via interface eth2.2
Jan  1 00:00:07 pppd[507]: Using interface ppp0
Jan  1 00:00:07 pppd[507]: Connect: ppp0 <--> eth2.2
Jan  1 00:00:07 pppd[507]: Remote message: Authentication OK,Welcome !
Jan  1 00:00:07 pppd[507]: PAP authentication succeeded
Jan  1 00:00:07 pppd[507]: peer from calling number 00:22:93:5DA:60 authorized
Jan  1 00:00:07 pppd[507]: local  IP address 49.86.109.191
Jan  1 00:00:07 pppd[507]: remote IP address 49.86.108.1
Jan  1 00:00:07 pppd[507]: primary   DNS address 61.147.37.1
Jan  1 00:00:07 pppd[507]: secondary DNS address 61.177.7.1
Jan  1 00:00:07 RT-N14U: WAN up (ppp0)
Jan  1 00:00:07 dnsmasq[386]: read /etc/hosts - 3 addresses
Jan  1 00:00:07 dnsmasq[386]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 00:00:07 dnsmasq-dhcp[386]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 00:00:07 dnsmasq[386]: using nameserver 61.147.37.1#53
Jan  1 00:00:07 dnsmasq[386]: using nameserver 61.177.7.1#53
Jan  1 00:00:07 httpd[511]: Server listening port 80 (HTTP).
Jan  1 00:00:07 miniupnpd[522]: version 1.9 starting UPnP-IGD ext if ppp0 BOOTID=1388505607
Jan  1 00:00:07 miniupnpd[522]: HTTP listening on port 49091
Jan  1 00:00:07 admin: 运行后WAN上/下活动: WAN动作:【up】,WAN接口名称:【ppp0】
Jan  1 00:00:07 PPPoE: Connected
Jan  1 00:00:08 自定义脚本2: 脚本完成
Jan  1 00:00:08 kernel: br0: port 2(ra0) entered forwarding state
Jan  1 00:00:08 kernel: br0: port 1(eth2.1) entered forwarding state
Jan  1 00:00:08 QOS: 最大下载2560 KB/S,最大上传256 KB/S
Jan  1 00:00:08 QOS: QOS没有开启或闪存不足缺模块
Jan  1 00:00:08 自定义脚本3: 脚本完成
Jan  1 00:00:08 防火墙规则: 脚本完成
Jan  1 00:00:08 crond[649]: crond (busybox 1.23.2) started, log level 8
Jan  1 00:00:08 automount: /sbin/automount.sh mmcblk0p1    AiDisk_01
Jan  1 00:00:08 automount: mount  device /dev/mmcblk0p1 (vfat) to /media/&#1013;&#883; @@@@@ /media/AiDisk_01
Jan  1 00:00:09 kernel: FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Jan  1 00:00:09 Automount: AiDisk_01
Jan  1 00:00:10 DHCP MAN Client: bound (eth2.2), IP: 192.168.1.3, GW: 192.168.1.1, lease time: 86400
Jan  1 00:00:10 RT-N14U: MAN up (eth2.2)
Jan  1 00:00:11 QOS: 最大下载2560 KB/S,最大上传256 KB/S
Jan  1 00:00:11 QOS: QOS没有开启或闪存不足缺模块
Jan  1 00:00:11 crond[777]: crond (busybox 1.23.2) started, log level 8
Jan  1 00:00:11 防火墙规则: 脚本完成
Jan  1 00:00:17 NTP Client: Synchronizing time to ntp.sjtu.edu.cn.
Jan  1 00:00:19 自定义脚本0: 脚本完成
Jan  1 00:00:19 dnsmasq[386]: exiting on receipt of SIGTERM
Jan  1 00:00:19 dnsmasq[811]: started, version 2.75 cachesize 1024
Jan  1 00:00:19 dnsmasq[811]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Jan  1 00:00:19 dnsmasq-dhcp[811]: DHCP, IP range 192.168.2.2 -- 192.168.2.244, lease time 1d
Jan  1 00:00:19 dnsmasq-dhcp[811]: DHCP, sockets bound exclusively to interface br0
Jan  1 00:00:19 dnsmasq[811]: read /etc/hosts - 3 addresses
Jan  1 00:00:19 dnsmasq[811]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 00:00:19 dnsmasq-dhcp[811]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 00:00:19 dnsmasq[811]: using nameserver 61.147.37.1#53
Jan  1 00:00:19 dnsmasq[811]: using nameserver 61.177.7.1#53
Jan  1 00:00:19 di: 互联网状态:20, 经过时间: s.
Jan  1 00:00:19 连接AP: 20秒后,自动搜寻ap
Jan  1 00:00:39 连接AP: 脚本完成
Jan  1 00:00:44 iptables: 删除8118转发规则
Jan  1 00:00:44 dnsmasq[811]: exiting on receipt of SIGTERM
Jan  1 00:00:44 dnsmasq[868]: started, version 2.75 cachesize 1024
Jan  1 00:00:44 dnsmasq[868]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Jan  1 00:00:44 dnsmasq-dhcp[868]: DHCP, IP range 192.168.2.2 -- 192.168.2.244, lease time 1d
Jan  1 00:00:44 dnsmasq-dhcp[868]: DHCP, sockets bound exclusively to interface br0
Jan  1 00:00:44 dnsmasq[868]: read /etc/hosts - 3 addresses
Jan  1 00:00:44 dnsmasq[868]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 00:00:44 dnsmasq-dhcp[868]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 00:00:44 dnsmasq[868]: using nameserver 61.147.37.1#53
Jan  1 00:00:44 dnsmasq[868]: using nameserver 61.177.7.1#53
Jan  1 00:00:44 adbyby: 开始下载7620n.tar.gz
Jan  1 00:00:52 NTP Client: Synchronizing time to s1a.time.edu.cn.
Jan  1 00:00:58 adbyby: 启动完成
Jan  1 00:00:58 adbyby: lazy更新:!  -----&#65533;&#65533;&#65533;&#65533;&#689;&#65533;&#65533;:  2015-12-27 22:41:24   by:xwhyc-----^M
Jan  1 00:00:58 adbyby: video更新:!  -----&#65533;&#65533;&#65533;&#65533;&#689;&#65533;&#65533;:  2015-12-26 21:50:12   by:xwhyc-----------------------------------------------^M
Jan  1 00:00:58 adbyby: adbyby 进程守护启动
Jan  1 00:00:58 opt: optU盘安装,模式:1
Jan  1 00:00:58 adbyby: 找不到8118转发规则,重新添加
Jan  1 00:00:58 iptables: 添加8118转发规则
Jan  1 00:00:58 dnsmasq[868]: exiting on receipt of SIGTERM
Jan  1 00:00:58 dnsmasq[979]: started, version 2.75 cachesize 1024
Jan  1 00:00:58 dnsmasq[979]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Jan  1 00:00:58 dnsmasq-dhcp[979]: DHCP, IP range 192.168.2.2 -- 192.168.2.244, lease time 1d
Jan  1 00:00:58 dnsmasq-dhcp[979]: DHCP, sockets bound exclusively to interface br0
Jan  1 00:00:58 dnsmasq[979]: read /etc/hosts - 3 addresses
Jan  1 00:00:58 dnsmasq[979]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 00:00:58 dnsmasq-dhcp[979]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 00:00:58 dnsmasq[979]: using nameserver 61.147.37.1#53
Jan  1 00:00:58 dnsmasq[979]: using nameserver 61.177.7.1#53
Jan  1 00:00:58 【opt】: opt不需更新
Jan  1 00:00:58 SS: 自动安装(覆盖opt文件夹)
Jan  1 00:00:58 SS: opt第一次下载
Jan  1 00:01:17 NTP Client: Synchronizing time to ntp.sjtu.edu.cn.
Jan  1 00:01:41 SS: opt解压完成
Jan  1 00:01:41 SS: 关闭,自动删除dnsmasqs配置
Jan  1 00:01:41 【s-s】: stop
Jan  1 00:01:42 dnsmasq[979]: exiting on receipt of SIGTERM
Jan  1 00:01:42 dnsmasq[1052]: started, version 2.75 cachesize 1024
Jan  1 00:01:42 dnsmasq[1052]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Jan  1 00:01:42 dnsmasq-dhcp[1052]: DHCP, IP range 192.168.2.2 -- 192.168.2.244, lease time 1d
Jan  1 00:01:42 dnsmasq-dhcp[1052]: DHCP, sockets bound exclusively to interface br0
Jan  1 00:01:42 dnsmasq[1052]: read /etc/hosts - 3 addresses
Jan  1 00:01:42 dnsmasq[1052]: read /etc/storage/dnsmasq/hosts - 0 addresses
Jan  1 00:01:42 dnsmasq-dhcp[1052]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Jan  1 00:01:42 dnsmasq[1052]: using nameserver 61.147.37.1#53
Jan  1 00:01:42 dnsmasq[1052]: using nameserver 61.177.7.1#53
Jan  1 00:01:42 【s-s】: flush
Jan  1 00:01:43 s-s: stop
Jan  1 00:01:43 pdnsd: stop
Jan  1 00:01:43 chinadns: stop
Jan  1 00:01:43 Pcap_DNSProxy: stop
Jan  1 00:01:45 花生壳内网版: Oraynewph start success !
Jan  1 00:01:52 NTP Client: Synchronizing time to s1a.time.edu.cn.
Jan  1 00:02:13 花生壳内网版: 守护进程启动
Jan  1 00:02:13 花生壳内网版: ONLINE
Jan  1 00:02:13 花生壳内网版: RUNSTATUS= ONLINE
Jan  1 00:02:13 花生壳内网版: SN= PBOX0004108830d0446c
Jan  1 00:02:13 花生壳内网版: 没绑定的花生壳账号,请尽快绑定
Jan  1 00:02:13 花生壳内网版: 使用SN账号在【 http://b.oray.com 】默认密码是admin登录.
Jan  1 00:02:13 花生壳内网版: 默认密码是admin默认密码是admin,然后进行修改默认密码、手机验证、邮箱验证和花生壳账号绑定
Jan  1 00:02:13 花生壳内网版: !!>>绑定后需【提交】内部存储,不然重启会丢失绑定。<<!!
Jan  1 00:02:13 花生壳内网版:  !>>绑定后需【提交】内部存储,不然重启会丢失绑定。<<!
Jan  1 00:02:13 花生壳内网版:   !>绑定后需【提交】内部存储,不然重启会丢失绑定。<!
Jan  1 00:02:13 花生壳内网版: 系统管理 - 恢复/导出/上传设置 - 路由器内部存储 (/etc/storage) - 【提交】
Jan  1 00:02:17 NTP Client: Synchronizing time to ntp.sjtu.edu.cn.
Jan  1 00:02:18 自定义脚本1: 脚本完成
Jan  1 00:02:28 crond[1246]: crond (busybox 1.23.2) started, log level 8
Jan  1 00:02:29 【opt】: opt不需更新
Jan  1 00:02:29 运行路由器启动后: 脚本完成
Jan  1 00:03:17 NTP Client: Synchronizing time to s1a.time.edu.cn.
Jan  1 00:04:17 NTP Client: Synchronizing time to ntp.sjtu.edu.cn.
Jan  1 00:05:00 crond[1246]: USER admin pid 1423 cmd [[ 0 == 3 ]] && killall EmbedThunderManager &
Jan  1 00:05:17 NTP Client: Synchronizing time to s1a.time.edu.cn.
Jan  1 00:06:17 NTP Client: Synchronizing time to ntp.sjtu.edu.cn.
Jan  1 00:07:17 NTP Client: Synchronizing time to s1a.time.edu.cn.
Jan  1 00:08:17 NTP Client: Synchronizing time to ntp.sjtu.edu.cn.
Jan  1 00:09:17 NTP Client: Synchronizing time to s1a.time.edu.cn.
Jan  1 00:10:00 crond[1246]: USER admin pid 1770 cmd killall oraynewph && killall oraysl &
Jan  1 00:10:10 花生壳内网版: 重新启动
Jan  1 00:10:10 花生壳内网版: reset success !
Jan  1 00:10:17 NTP Client: Synchronizing time to ntp.sjtu.edu.cn.
Jan  1 00:15:00 crond[1246]: USER admin pid 1977 cmd /tmp/sh_reFastDick.sh &
Jan  1 00:15:17 NTP Client: Synchronizing time to s1a.time.edu.cn.
Jan  1 00:20:17 NTP Client: Synchronizing time to ntp.sjtu.edu.cn.

我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-12-28 19:22 | 显示全部楼层
小白请问楼主,今天(28日)更新“添加中继守护功能”具体是什么功能呢?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-12-28 20:08 | 显示全部楼层
本帖最后由 烟屁股 于 2015-12-28 20:15 编辑

Newifi mini 安装最新的12-28固件,无法下载完成ss(安装失败),LOG代码如下,请注意红色字体。一开始我担心是16M的存储空间不足,没有加载Adblock第三方规则,修改后依然无法安装,小时(内存安装失败)……
#####################################################

Dec 28 20:04:18 adbyby: 添加过滤白名单地址
Dec 28 20:04:18 adbyby: 加白地址:tudou.com,bilibili.com,acfun.tv
Dec 28 20:04:30 adbyby: 启动完成
Dec 28 20:04:30 adbyby: lazy更新:!  -----&#65533;&#65533;&#65533; 2015-12-27 22:41:24   by:xwhyc-----^M
Dec 28 20:04:30 adbyby: video更新:!  -----&#65533;&#65533;&#65533; 2015-12-26 21:50:12   by:xwhyc-----------------------------------------------^M
Dec 28 20:04:30 adbyby: adbyby 进程守护启动
Dec 28 20:04:30 adbyby: 路由器负载监控启动
Dec 28 20:04:30 opt: opt内存安装,模式:2,没有百度云、迅雷
Dec 28 20:04:30 SS: 自动安装(覆盖opt文件夹)
Dec 28 20:04:30 SS: opt第一次下载
Dec 28 20:04:31 adbyby: 找不到8118转发规则,重新添加
Dec 28 20:04:31 iptables: 添加8118转发规则
Dec 28 20:04:31 dnsmasq[870]: exiting on receipt of SIGTERM
Dec 28 20:04:31 dnsmasq[1009]: started, version 2.75 cachesize 1024
Dec 28 20:04:31 dnsmasq[1009]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Dec 28 20:04:31 dnsmasq-dhcp[1009]: DHCP, IP range 192.168.31.2 -- 192.168.31.244, lease time 1d
Dec 28 20:04:31 dnsmasq-dhcp[1009]: DHCP, sockets bound exclusively to interface br0
Dec 28 20:04:31 dnsmasq[1009]: read /etc/hosts - 3 addresses
Dec 28 20:04:31 dnsmasq[1009]: read /etc/storage/dnsmasq/hosts - 0 addresses
Dec 28 20:04:31 dnsmasq-dhcp[1009]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Dec 28 20:04:31 dnsmasq[1009]: using nameserver 114.114.114.114#53
Dec 28 20:04:31 dnsmasq[1009]: using nameserver 115.115.115.115#53
Dec 28 20:04:42 SS: opt解压完成
Dec 28 20:04:42 SS: 内存安装失败
Dec 28 20:04:42 SS: 关闭,自动删除dnsmasqs配置
Dec 28 20:04:42 【s-s】: stop

Dec 28 20:04:42 dnsmasq[1009]: exiting on receipt of SIGTERM
Dec 28 20:04:42 dnsmasq[1056]: started, version 2.75 cachesize 1024
Dec 28 20:04:42 dnsmasq[1056]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Dec 28 20:04:42 dnsmasq-dhcp[1056]: DHCP, IP range 192.168.31.2 -- 192.168.31.244, lease time 1d
Dec 28 20:04:42 dnsmasq-dhcp[1056]: DHCP, sockets bound exclusively to interface br0
Dec 28 20:04:42 dnsmasq[1056]: read /etc/hosts - 3 addresses
Dec 28 20:04:42 dnsmasq[1056]: read /etc/storage/dnsmasq/hosts - 0 addresses
Dec 28 20:04:42 dnsmasq-dhcp[1056]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Dec 28 20:04:42 dnsmasq[1056]: using nameserver 114.114.114.114#53
Dec 28 20:04:42 dnsmasq[1056]: using nameserver 115.115.115.115#53
Dec 28 20:04:42 【s-s】: flush
Dec 28 20:04:43 s-s: stop
Dec 28 20:04:43 pdnsd: stop
Dec 28 20:04:43 chinadns: stop
Dec 28 20:04:43 Pcap_DNSProxy: stop
Dec 28 20:04:45 自定义脚本1: 脚本完成

我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-12-28 20:20 | 显示全部楼层
我又试了一次,为了测试是不是adbyby和adblock功能专用存储空间过多,是ss安装失败,本次完全将去广告功能关闭,依然不能完成ss安装!

###################################
Dec 28 20:17:54 dnsmasq[819]: using nameserver 202.99.216.113#53
Dec 28 20:17:54 dnsmasq[819]: using nameserver 202.97.131.178#53
Dec 28 20:17:54 di: 互联网状态:20, 经过时间: s.
Dec 28 20:17:54 连接AP: 20秒后,自动搜寻ap
Dec 28 20:18:01 NTP Client: System time changed, offset: 5.283493s
Dec 28 20:18:20 连接AP: 脚本完成
Dec 28 20:18:25 adbyby: 功能关闭
Dec 28 20:18:25 opt: opt内存安装,模式:2,没有百度云、迅雷
Dec 28 20:18:25 SS: 自动安装(覆盖opt文件夹)
Dec 28 20:18:25 SS: opt第一次下载
Dec 28 20:18:37 SS: opt解压完成
Dec 28 20:18:37 SS: 内存安装失败
Dec 28 20:18:37 SS: 关闭,自动删除dnsmasqs配置
Dec 28 20:18:37 【s-s】: stop
Dec 28 20:18:37 dnsmasq[819]: exiting on receipt of SIGTERM
Dec 28 20:18:37 dnsmasq[901]: started, version 2.75 cachesize 1024
Dec 28 20:18:37 dnsmasq[901]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-scripts TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
Dec 28 20:18:37 dnsmasq-dhcp[901]: DHCP, IP range 192.168.31.2 -- 192.168.31.244, lease time 1d
Dec 28 20:18:37 dnsmasq-dhcp[901]: DHCP, sockets bound exclusively to interface br0
Dec 28 20:18:37 dnsmasq[901]: read /etc/hosts - 3 addresses
Dec 28 20:18:37 dnsmasq[901]: read /etc/storage/dnsmasq/hosts - 0 addresses
Dec 28 20:18:37 dnsmasq-dhcp[901]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
Dec 28 20:18:37 dnsmasq[901]: using nameserver 202.99.216.113#53
Dec 28 20:18:37 dnsmasq[901]: using nameserver 202.97.131.178#53
Dec 28 20:18:37 【s-s】: flush
Dec 28 20:18:38 s-s: stop
Dec 28 20:18:38 pdnsd: stop
Dec 28 20:18:38 chinadns: stop
Dec 28 20:18:38 Pcap_DNSProxy: stop
Dec 28 20:18:40 自定义脚本1: 脚本完成
Dec 28 20:18:50 crond[1009]: crond (busybox 1.23.2) started, log level 8
Dec 28 20:18:50 【opt】: opt不需更新
Dec 28 20:18:50 运行路由器启动后: 脚本完成

点评

一样,貌似脚本有问题吧。  详情 回复 发表于 2015-12-28 20:39
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-12-28 20:39 | 显示全部楼层
烟屁股 发表于 2015-12-28 20:20
我又试了一次,为了测试是不是adbyby和adblock功能专用存储空间过多,是ss安装失败,本次完全将去广告功能 ...

一样,貌似脚本有问题吧。

点评

一样 必须接U盘才能启动 SS  详情 回复 发表于 2015-12-31 15:40
对的,一样.我的也是这样.前几个版本就是没解决.安装到U盘也是失败.  发表于 2015-12-28 21:46
我也正在查脚本,应该是这个方面的问题  详情 回复 发表于 2015-12-28 20:52
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-12-28 20:52 | 显示全部楼层
flyblue1985 发表于 2015-12-28 20:39
一样,貌似脚本有问题吧。

我也正在查脚本,应该是这个方面的问题

点评

已经修复这个脚本错误,请重新下载更新并恢复重置脚本  详情 回复 发表于 2015-12-28 21:43
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2015-12-28 21:43 | 显示全部楼层
烟屁股 发表于 2015-12-28 20:52
我也正在查脚本,应该是这个方面的问题

已经修复这个脚本错误,请重新下载更新并恢复重置脚本

点评

已刷,搞定了!谢谢!  详情 回复 发表于 2015-12-28 23:37
老大辛苦了!非常感谢!!!  详情 回复 发表于 2015-12-28 22:50
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-12-28 22:45 | 显示全部楼层
请问大大,ssh的帐号和密码是什么,还有端号是22吗

点评

ssh服务默认关闭的,要去【系统管理 - 服务】开启 帐号和密码和web管理帐号和密码一样  详情 回复 发表于 2015-12-28 22:50
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

 楼主| 发表于 2015-12-28 22:50 | 显示全部楼层
ktoc 发表于 2015-12-28 22:45
请问大大,ssh的帐号和密码是什么,还有端号是22吗

ssh服务默认关闭的,要去【系统管理 - 服务】开启

帐号和密码和web管理帐号和密码一样
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-12-28 22:50 | 显示全部楼层
hiboyhiboyhiboy 发表于 2015-12-28 21:43
已经修复这个脚本错误,请重新下载更新并恢复重置脚本

老大辛苦了!非常感谢!!!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2015-12-28 23:37 | 显示全部楼层
hiboyhiboyhiboy 发表于 2015-12-28 21:43
已经修复这个脚本错误,请重新下载更新并恢复重置脚本

已刷,搞定了!谢谢!
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-3-29 15:37

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表