|
楼主 |
发表于 2015-3-13 11:58
|
显示全部楼层
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.32 (lintel@PandoraBox-Server) (gcc version 4.8.3 (PandoraBox/Linaro GCC 4.8-2014.04 svn-r514) ) #6 Thu Mar 12 17:49:54 CST 2015
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine model: Actiontec MI424WR-I
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200n8 earlyprintk
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 125364K/131072K available (3142K kernel code, 138K rwdata, 888K rodata, 135K init, 179K bss, 5708K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc03f7dbc (4032 kB)
[ 0.000000] .init : 0xc03f8000 - 0xc0419f14 ( 136 kB)
[ 0.000000] .data : 0xc041a000 - 0xc043c92c ( 139 kB)
[ 0.000000] .bss : 0xc043c92c - 0xc04698a0 ( 180 kB)
[ 0.000000] NR_IRQS:114
[ 0.000011] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474836475ns
[ 0.000101] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[ 0.040050] pid_max: default: 32768 minimum: 301
[ 0.040138] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040148] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.041685] CPU: Testing write buffer coherency: ok
[ 0.041932] Setting up static identity map for 0x11568 - 0x115a4
[ 0.042729] VFP support v0.3: not present
[ 0.043083] pinctrl core: initialized pinctrl subsystem
[ 0.043597] regulator-dummy: no parameters
[ 0.043878] NET: Registered protocol family 16
[ 0.044163] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.045323] cpuidle: using governor ladder
[ 0.045352] Avanta: MV88F6560-Rev-2.
[ 0.045472] Feroceon L2: Cache support initialised.
[ 0.055217] bio: create slab <bio-0> at 0
[ 0.056345] SCSI subsystem initialized
[ 0.058251] Switched to clocksource orion_clocksource
[ 0.059991] NET: Registered protocol family 2
[ 0.060739] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060765] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060788] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.060837] TCP: reno registered
[ 0.060849] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.060873] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.061042] NET: Registered protocol family 1
[ 0.062274] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.062754] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.062765] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (RTIME) (RUBIN) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.062910] msgmni has been set to 244
[ 0.063293] io scheduler noop registered
[ 0.063303] io scheduler deadline registered (default)
[ 0.064117] kirkwood-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.064762] mvebu-pcie pcie-controller.1: PCI host bridge to bus 0000:00
[ 0.064781] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 0.064793] pci_bus 0000:00: root bus resource [mem 0xf3000000-0xf4000000]
[ 0.064805] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.065090] PCI: bus0: Fast back to back transfers disabled
[ 0.065106] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.065710] PCI: bus1: Fast back to back transfers disabled
[ 0.065800] pci 0000:00:01.0: BAR 8: assigned [mem 0xf3000000-0xf30fffff]
[ 0.065817] pci 0000:01:00.0: BAR 0: assigned [mem 0xf3000000-0xf300ffff 64bit]
[ 0.065839] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.065852] pci 0000:00:01.0: bridge window [mem 0xf3000000-0xf30fffff]
[ 0.135494] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.136984] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A
[ 0.546884] console [ttyS0] enabled
[ 0.552135] nand: device found, Manufacturer ID: 0x92, Chip ID: 0xf1
[ 0.558544] nand: Eon NAND 128MiB 3,3V 8-bit
[ 0.562836] nand: 128MiB, SLC, page size: 2048, OOB size: 64
[ 0.568536] Scanning device for bad blocks
[ 0.609344] 4 ofpart partitions found on MTD device orion_nand
[ 0.615204] Creating 4 MTD partitions on "orion_nand":
[ 0.620382] 0x000000000000-0x000000200000 : "u-boot"
[ 0.626396] 0x000000200000-0x000002200000 : "jffs2"
[ 0.632260] 0x000003000000-0x000003200000 : "kernel"
[ 0.638114] 0x000003200000-0x000008000000 : "ubi"
[ 0.644466] libphy: Fixed MDIO Bus: probed
[ 0.648880] libphy: orion_mdio_bus: probed
[ 0.655712] mvneta f1074000.ethernet eth0: Using hardware mac address 00:50:43:00:02:02
[ 0.665623] mvneta f1070000.ethernet eth1: Using hardware mac address 00:50:43:00:02:02
[ 0.675049] TCP: cubic registered
[ 0.678405] NET: Registered protocol family 17
[ 0.683108] 8021q: 802.1Q VLAN Support v1.8
[ 0.688337] regulator-dummy: disabling
[ 0.692584] UBI: auto-attach mtd3
[ 0.695921] UBI: attaching mtd3 to ubi0
[ 0.809911] UBI: scanning is finished
[ 0.824368] UBI: attached mtd3 (name "ubi", size 78 MiB) to ubi0
[ 0.830432] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
[ 0.837251] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 512
[ 0.843906] UBI: VID header offset: 512 (aligned 512), data offset: 2048
[ 0.850648] UBI: good PEBs: 624, bad PEBs: 0, corrupted PEBs: 0
[ 0.856595] UBI: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 0.863774] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1497304119
[ 0.872871] UBI: available PEBs: 0, total reserved PEBs: 624, PEBs reserved for bad PEB handling: 20
[ 0.882280] UBI: background thread "ubi_bgt0d" started, PID 742
[ 0.888749] UBI: ubiblock0_0 created from ubi0:0(rootfs)
[ 0.894089] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 0.901445] mvsw61xx 8.mvsw6171: Found MV88F6560 built-in at f1072004.mdio-bu:08
[ 0.908896] mvsw61xx 8.mvsw6171: Using indirect addressing
[ 0.920803] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 0.928529] Freeing unused kernel memory: 132K (c03f8000 - c0419000)
procd: Console is alive
[ 2.788809] usbcore: registered new interface driver usbfs
[ 2.794481] usbcore: registered new interface driver hub
[ 2.800038] usbcore: registered new device driver usb
[ 2.807440] Button Hotplug driver version 0.4.1
[ 2.978785] raid6: int32x1 94 MB/s
[ 3.148389] raid6: int32x2 145 MB/s
[ 3.318305] raid6: int32x4 170 MB/s
[ 3.488601] raid6: int32x8 174 MB/s
[ 3.492368] raid6: using algorithm int32x8 (174 MB/s)
[ 3.497441] raid6: using intx1 recovery algorithm
[ 3.502911] xor: measuring software checksum speed
[ 3.598255] arm4regs : 1076.400 MB/sec
[ 3.698258] 8regs : 767.600 MB/sec
[ 3.798257] 32regs : 835.200 MB/sec
[ 3.802461] xor: using function: arm4regs (1076.400 MB/sec)
[ 3.893221] bio: create slab <bio-1> at 1
[ 3.897591] Btrfs loaded
[ 3.903238] exFAT: Version 1.2.9
[ 3.922231] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 3.932681] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.939978] ehci-platform: EHCI generic platform driver
[ 3.946100] ehci-orion: EHCI orion driver
[ 3.950280] orion-ehci f1050000.ehci: EHCI Host Controller
[ 3.955817] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
[ 3.963621] orion-ehci f1050000.ehci: irq 23, io mem 0xf1050000
[ 3.988268] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
[ 3.994444] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.001282] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.008553] usb usb1: Product: EHCI Host Controller
[ 4.013456] usb usb1: Manufacturer: Linux 3.14.32 ehci_hcd
[ 4.018980] usb usb1: SerialNumber: f1050000.ehci
[ 4.024282] hub 1-0:1.0: USB hub found
[ 4.028077] hub 1-0:1.0: 1 port detected
[ 4.033705] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.042113] usbcore: registered new interface driver usb-storage
procd: - preinit -
Failed to find gpio-button-hotplug. Maybe it is a built in module ?
[ 4.347212] random: mktemp urandom read with 43 bits of entropy available
Press the [f] key and hit [enter[ 4.368344] usb 1-1: new high-speed USB device number 2 using orion-ehci
] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 4.529893] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
[ 4.536646] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.543839] usb 1-1: Product: USB2.0 Hub
[ 4.550365] hub 1-1:1.0: USB hub found
[ 4.554514] hub 1-1:1.0: 4 ports detected
[ 6.318288] mvneta f1074000.ethernet eth0: link up
kmod: ran 1 iterations
block: extroot: unable to locate rootfs mtdblock
[ 7.979876] UBIFS: background thread "ubifs_bgt0_1" started, PID 823
[ 8.011007] UBIFS: recovery needed
[ 8.120813] UBIFS: recovery completed
[ 8.124590] UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 8.131085] UBIFS: LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 8.140273] UBIFS: FS size: 66060288 bytes (63 MiB, 512 LEBs), journal size 3354624 bytes (3 MiB, 26 LEBs)
[ 8.149980] UBIFS: reserved for root: 3120190 bytes (3047 KiB)
[ 8.155845] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C1A48CD8-F4F8-4429-9146-BE90EE566919, small LPT model
switching to overlay
procd: - early -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[ 12.648427] NET: Registered protocol family 10
[ 12.677166] NET: Registered protocol family 8
[ 12.681595] NET: Registered protocol family 20
[ 12.751006] tun: Universal TUN/TAP device driver, 1.6
[ 12.756088] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 12.778428] sit: IPv6 over IPv4 tunneling driver
[ 12.815405] nf_conntrack version 0.5.0 (1960 buckets, 7840 max)
[ 12.843037] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.867193] Netfilter messages via NETLINK v0.30.
[ 12.878433] ip_set: protocol 6
[ 12.956416] hidraw: raw HID events driver (C) Jiri Kosina
[ 12.985370] u32 classifier
[ 12.988097] input device check on
[ 12.991807] Actions configured
[ 13.017585] Mirror/redirect action on
[ 13.084539] fuse init (API version 7.22)
[ 13.093435] PandoraBox IP Bandwidth load.
[ 13.108726] usbcore: registered new interface driver cdc_acm
[ 13.114419] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 13.138479] cm109: Keymap for Komunikate KIP1000 phone loaded
[ 13.145257] usbcore: registered new interface driver cm109
[ 13.150801] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[ 13.175374] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[ 13.183369] Backport generated by backports.git backports-20140320-37-g5c33da0
[ 13.220217] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.315649] usbcore: registered new interface driver usbhid
[ 13.321289] usbhid: USB HID core driver
[ 13.345115] usbcore: registered new interface driver usblp
[ 13.368757] usbcore: registered new interface driver usbserial
[ 13.374877] usbcore: registered new interface driver usbserial_generic
[ 13.388316] usbserial: USB Serial support registered for generic
[ 13.498409] xt_time: kernel timezone is -0000
[ 13.537795] cfg80211: Calling CRDA to update world regulatory domain
[ 13.548658] cfg80211: World regulatory domain updated:
[ 13.553846] cfg80211: DFS Master region: unset
[ 13.558223] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.568038] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.576091] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.584144] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.592196] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.600336] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 13.608476] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 13.616605] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.624656] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 13.638374] usbcore: registered new interface driver ch341
[ 13.644196] usbserial: USB Serial support registered for ch341-uart
[ 13.660006] usbcore: registered new interface driver cp210x
[ 13.667226] usbserial: USB Serial support registered for cp210x
[ 13.695990] usbcore: registered new interface driver ftdi_sio
[ 13.705326] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 13.778037] usbcore: registered new interface driver pl2303
[ 13.787265] usbserial: USB Serial support registered for pl2303
[ 13.806827] PPP generic driver version 2.4.2
[ 13.820316] NET: Registered protocol family 24
[ 13.838415] usbcore: registered new interface driver sierra
[ 13.844346] usbserial: USB Serial support registered for Sierra USB modem
[ 13.872484] usbcore: registered new interface driver snd-usb-audio
[ 13.928728] usbcore: registered new interface driver option
[ 13.938381] usbserial: USB Serial support registered for GSM modem (1-port)
[ 13.963506] usbcore: registered new interface driver qcserial
[ 13.978390] usbserial: USB Serial support registered for Qualcomm USB modem
[ 14.004821] PCI: enabling device 0000:00:01.0 (0140 -> 0143)
[ 14.158676] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xc90c0000, irq=25
[ 14.180745] cfg80211: Calling CRDA for country: US
[ 14.189003] cfg80211: Regulatory domain changed to country: US
[ 14.194868] cfg80211: DFS Master region: FCC
[ 14.199099] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 14.208910] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 14.216953] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 14.225006] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 14.233059] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 14.241112] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 16.920939] random: nonblocking pool is initialized
[ 21.717184] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.728226] IPv6: ADDRCONF(NETDEV_UP): eth0.1: link is not ready
[ 21.738614] device eth0.1 entered promiscuous mode
[ 21.743457] device eth0 entered promiscuous mode
[ 21.758559] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 21.797838] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready
[ 23.321846] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.428291] device wlan0 entered promiscuous mode
[ 23.433310] br-lan: port 2(wlan0) entered forwarding state
[ 23.438891] br-lan: port 2(wlan0) entered forwarding state
[ 23.444875] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 23.572403] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 23.755150] mvneta f1074000.ethernet eth0: link up
[ 23.768209] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.824436] br-lan: port 1(eth0.1) entered forwarding state
[ 23.830138] br-lan: port 1(eth0.1) entered forwarding state
[ 23.835886] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 23.842530] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
[ 25.438288] br-lan: port 2(wlan0) entered forwarding state
[ 25.828291] br-lan: port 1(eth0.1) entered forwarding state
procd: - init complete -
BusyBox v1.22.1 (2015-03-12 15:07:12 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______________________________________________________________
| ____ _ ____ |
| | _ \ __ _ _ __ __| | ___ _ __ __ _| __ ) _____ __ |
| | |_) / _` | '_ \ / _` |/ _ \| '__/ _` | _ \ / _ \ \/ / |
| | __/ (_| | | | | (_| | (_) | | | (_| | |_) | (_) > < |
| |_| \__,_|_| |_|\__,_|\___/|_| \__,_|____/ \___/_/\_\ |
| |
| PandoraBox SDK Plantform |
| Copyright 2013-2015 |
| D-Team Technology Co.,Ltd. ShenZhen |
|______________________________________________________________|
Base on OpenWrt BARRIER BREAKER (14.09, r514)
[root@PandoraBox:/]#
|
|