找回密码
 立即注册

QQ登录

只需一步,快速开始

搜索
广告投放联系QQ68610888
查看: 20581|回复: 14

LG U+ CAPL-6000 AR7241+9287UBNT 5.5.6固件

[复制链接]
发表于 2016-1-22 10:22 | 显示全部楼层 |阅读模式
本帖最后由 轻松一试 于 2017-2-8 11:33 编辑

本固件是自己用的,UBOOT 用的breed(r806) 最新版,固件用的ubnt 5.5.6, art功率23DB。
本固件无复位版本编程器固件。进入系统后不要去点击复位,不然会无限重启。
百度下载:http://pan.baidu.com/s/1gevrOEf


刷编程器固件的时候勾上ART

我的恩山、我的无线 The best wifi forum is right here.
发表于 2016-1-22 15:31 | 显示全部楼层
不错  明天回来刷刷看
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-1-23 10:33 来自手机 | 显示全部楼层
请问需要固定ip地址吗?ip地址是
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-1-23 19:21 | 显示全部楼层
我刷了怎么都没有什么反应啊。获取不到IP
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-1-23 19:57 来自手机 | 显示全部楼层
本帖最后由 jy678 于 2016-1-24 10:39 编辑

你天线怎么改的  我的效果很差  完全就是个垃圾
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-1-23 20:15 | 显示全部楼层
不知道IP没有用啊。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-2-24 03:10 | 显示全部楼层
本固件无复位版本编程器固件。进入系统后不要去点击复位,不然会无限重启。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-3-7 15:55 | 显示全部楼层
收藏了,谢谢分享,支持。
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-5-4 19:35 | 显示全部楼层
IP地址和密码是多少 ?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-5-12 19:06 | 显示全部楼层
LZ,我刷你这个版本,第一次刷起来了,但是无线加载不出来,后面在刷,UBNT直接就启动不了, 能帮我看下吗?
下面是日志:
Boot and Recovery Environment for Embedded Devices
Copyright (C) 2016 HackPascal <hackpascal@gmail.com>
Build date 2016-04-19 [git-3b445d3]
Version 1.0 (r849)

DRAM: 64MB
Platform: Atheros AR7241 rev 1
Board: Generic board
Clocks: CPU: 400MHz, DDR: 400MHz, AHB: 200MHz, Ref: 40MHz
Flash: Macronix MX25L12835E (16MB) on ath79-spi
ag71xx-eth: MAC address is invalid, using default settings.
ag71xx-eth: Using MAC address 00:13:74:00:00:01
eth0: Atheros AR8216 rev 2

Network started on eth0, inet addr 192.168.1.1, netmask 255.255.255.0

Press any key to interrupt autoboot ... 0

Trying to boot firmware from 0x9f050000 ...
U-Boot firmware image header detected.
    Image Name:   MIPS Ubiquiti Linux-2.6.32.54
    Data Size:    1047584 Bytes
    Load Address: 80002000
    Entry Point:  80002000
Uncompressing data (LZMA) ... done.
Flushing cache ... done.

Starting kernel at 0x80002000...

Booting...
[    0.000000] Linux version 2.6.32.54 (buildd@builder) (gcc version 4.1.2) #1 Tue May 28 17:56:11 EEST 2013
[    0.000000] flash_size passed from bootloader = 16
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 04000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00004000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00004000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line: console=ttyS0,115200 root=31:03 rootfstype=squashfs init=/init mem=64M mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),1024k(kernel),6528k(rootfs),256k(cfg),64k(EEPROM)
[    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00040000
[    0.000000] Readback ErrCtl register=00040000
[    0.000000] Memory: 61808k/65536k available (2289k kernel code, 3660k reserved, 539k data, 136k init, 0k highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:128
[    0.000000] plat_time_init: plat time init done
[    0.000000] Console: colour dummy device 80x25
[    0.000000] Calibrating delay loop... 266.24 BogoMIPS (lpj=133120)
[    0.022000] Mount-cache hash table entries: 512
[    0.025000] NET: Registered protocol family 16
[    0.027000] ===== ar7240_platform_init: 0
[    0.027000] PCIe WLAN H/W found [tries: 1]
[    0.027000] PCI init:ar7240_pcibios_init
[    0.027000] ar7240_pcibios_init(368): PCI CMD write: 0x356
[    0.027000] registering PCI controller with io_map_base unset
[    0.035000] bio: create slab <bio-0> at 0
[    0.036000] usbcore: registered new interface driver usbfs
[    0.037000] usbcore: registered new interface driver hub
[    0.037000] usbcore: registered new device driver usb
[    0.038000] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.038000] pci 0000:00:00.0: PME# disabled
[    0.039000] Returning IRQ 48
[    0.040000] Switching to clocksource MIPS
[    0.043000] NET: Registered protocol family 2
[    0.043000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.045000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.045000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.045000] TCP: Hash tables configured (established 2048 bind 2048)
[    0.045000] TCP reno registered
[    0.045000] NET: Registered protocol family 1
[    0.046000] AR7240 GPIOC major 0
[    0.048000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.048000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.048000] msgmni has been set to 120
[    0.049000] io scheduler noop registered (default)
[    0.073000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    0.075000] serial8250.0: ttyS0 at MMIO 0xb8020000 (irq = 19) is a 16550A
[    0.387000] console [ttyS0] enabled
[    0.392000] 6 cmdlinepart partitions found on MTD device ar7240-nor0
[    0.399000] Creating 6 MTD partitions on "ar7240-nor0":
[    0.404000] 0x000000000000-0x000000040000 : "u-boot"
[    0.410000] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.417000] 0x000000050000-0x000000150000 : "kernel"
[    0.423000] 0x000000150000-0x0000007b0000 : "rootfs"
[    0.430000] mtd: partition "rootfs" set to be root filesystem
[    0.435000] 0x0000007b0000-0x0000007f0000 : "cfg"
[    0.441000] 0x0000007f0000-0x000000800000 : "EEPROM"
[    0.448000] usbmon: debugfs is not available
[    0.452000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.489000] Port Status c000004
[    0.492000] ar7240-ehci ar7240-ehci.0: ATH EHCI
[    0.497000] ar7240-ehci ar7240-ehci.0: new USB bus registered, assigned bus number 1
[    0.506000] ehci_reset Intialize USB CONTROLLER in host mode: 3
[    0.513000] ehci_reset Port Status c000000
[    0.517000] ar7240-ehci ar7240-ehci.0: irq 3, io mem 0x1b000000
[    0.524000] ehci_reset Intialize USB CONTROLLER in host mode: 3
[    0.531000] ehci_reset Port Status c000000
[    0.541000] ar7240-ehci ar7240-ehci.0: USB 2.0 started, EHCI 1.00
[    0.547000] usb usb1: configuration #1 chosen from 1 choice
[    0.553000] hub 1-0:1.0: USB hub found
[    0.557000] hub 1-0:1.0: 1 port detected
[    0.562000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.569000] u32 classifier
[    0.572000]     Performance counters on
[    0.575000]     input device check on
[    0.579000]     Actions configured
[    0.585000] TCP westwood registered
[    0.588000] NET: Registered protocol family 10
[    0.597000] NET: Registered protocol family 17
[    0.602000] Bridge firewalling registered
[    0.606000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[    0.613000] All bugs added by David S. Miller <davem@redhat.com>
[    0.619000] ar7240wdt_init: Registering WDT success
[    0.634000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    0.642000] Freeing unused kernel memory: 136k freed
[    0.660000] Please be patient, while AirOS loads ...
[    1.786000] Algorithmics/MIPS FPU Emulator v1.5
...mounts done
...filesystem init done
...base ok
...update ok
...symlinks ok
...httpd ok
...detect ok
...caldata ok
...running /sbin/init
[   14.415000] Oops[#1]:
[   14.415000] Cpu 0
[   14.415000] $ 0   : 00000000 00000000 00000038 00000000
[   14.415000] $ 4   : 802b48ec 00005ac2 00005ac2 00000032
[   14.415000] $ 8   : 00005ac2 802f3c4c 00000033 802f0000
[   14.415000] $12   : 802f0000 802f0000 00000000 18ad2380
[   14.415000] $16   : 00000101 00000100 832d0000 00000001
[   14.415000] $20   : 832e0000 8325dce0 00000001 00000003
[   14.415000] $24   : 00000000 0000000e
[   14.415000] $28   : 8325c000 8325dc90 8325dd80 832bb96c
[   14.415000] Hi    : 00000211
[   14.415000] Lo    : e6470d6d
[   14.415000] epc   : 832bb978 ubnt_poll_on_vap_attach+0x158/0x4b8 [ubnt_poll]
[   14.415000]     Tainted: P
[   14.415000] ra    : 832bb96c ubnt_poll_on_vap_attach+0x14c/0x4b8 [ubnt_poll]
[   14.415000] Status: 1000ff03    KERNEL EXL IE
[   14.415000] Cause : 8080000c
[   14.415000] BadVA : 00000000
[   14.415000] PrId  : 00019374 (MIPS 24Kc)
[   14.415000] Modules linked in: rssi_leds(P) ubnt_poll(P) ath_pci(P) ath_dev(P) ath_rate_atheros(P) fuse sierra option usb_storage usbserial cdc_acm wlan_me(P) wlan_xauth(P) wlan_wep(P) wlan_tkip(P) wlan_ccmp wlan_acl(P) wlan_scan_sta(P) wlan_scan_ap(P) wlan(P) ath_hal(P) sd_mod x_tables pppoe pppox ppp_mppe ppp_async ppp_generic slhc crc_ccitt vfat fat nls_iso8859_1 nls_cp437 scsi_mod ar7240_gpio ag7240_eth libcrc32c crc32c sha1_generic michael_mic md5 hmac des_generic arc4 aes_generic ecb cbc
[   14.415000] Process wlanconfig (pid: 792, threadinfo=8325c000, task=83be8948, tls=00000000)
[   14.415000] Stack : 00000001 00005a8d 00005a8d 00000032 2ab3e000 00400000 00000006 00000000
[   14.415000]         83170000 00000001 00000000 839f82c0 8318dcb4 00000000 00000000 00000000
[   14.415000]         00000001 00000000 83a942c0 00000000 00000000 00000006 00000001 839f82c0
[   14.415000]         83a942c0 839f82c0 00000000 00000006 83165294 8325dd38 00000041 00000000
[   14.415000]         802c50d0 80088c30 00000001 00000001 00000000 00000001 00000018 0000001b
[   14.415000]         ...
[   14.415000] Call Trace:
[   14.415000] [<832bb978>] ubnt_poll_on_vap_attach+0x158/0x4b8 [ubnt_poll]
[   14.415000] [<8318dcb4>] ath_dev_attach+0x11e0/0x14cc [ath_dev]
[   14.415000]
[   14.415000]
[   14.415000] Code: 1611fffd  26100001  00001821 <08caef2c> a0000000  24020002  1462000a  00000000  0ccb1c6a

点评

已解决,刷编程器固件的时候勾上ART(也就是要用固件里的ART)  详情 回复 发表于 2016-5-13 14:47
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-5-13 14:47 | 显示全部楼层
zwenping 发表于 2016-5-12 19:06
LZ,我刷你这个版本,第一次刷起来了,但是无线加载不出来,后面在刷,UBNT直接就启动不了, 能帮我看下吗 ...

已解决,刷编程器固件的时候勾上ART(也就是要用固件里的ART)
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-5-18 16:25 | 显示全部楼层
必须要编程器刷么?在页面上能刷这个么?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-10-5 21:13 | 显示全部楼层
我也是购买这款路由器,就是不知道怎么刷机,能教教小白不?

点评

请问是在什么地方买的?  详情 回复 发表于 2016-12-12 13:55
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-12-12 13:55 | 显示全部楼层
横州仔 发表于 2016-10-5 21:13
我也是购买这款路由器,就是不知道怎么刷机,能教教小白不?

请问是在什么地方买的?
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

发表于 2016-12-17 19:41 | 显示全部楼层
我的恩山、我的无线 The best wifi forum is right here.
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

有疑问请添加管理员QQ86788181|手机版|小黑屋|Archiver|恩山无线论坛(常州市恩山计算机开发有限公司版权所有) ( 苏ICP备05084872号 )

GMT+8, 2024-4-20 00:31

Powered by Discuz! X3.5

© 2001-2024 Discuz! Team.

| 江苏省互联网有害信息举报中心 举报信箱:js12377 | @jischina.com.cn 举报电话:025-88802724 本站不良内容举报信箱:68610888@qq.com 举报电话:0519-86695797

快速回复 返回顶部 返回列表