|
本帖最后由 21500429 于 2016-2-3 16:46 编辑
在一个国外论坛找到的,那个大神更新了三次,现在这个是最新版,以下是英文的简介2015.11.8
How to flash:
- restore default settings from stock GUI
- flash tomato image via stock GUI
- after flash leave router for 5-7 minutes until ping 192.168.1.1 will return
- log into tomato and first of all erase nvram and reboot
- log into tomato and have fun
Known issues:
- 5G radio may not come up after flashing the firmware, reset the configuration settings and reboot
The GPIO pins identified are as follows:
14 - power led (green/off) - only if gpio 16 is disabled
16 - power led (amber/off)
17 - radio led 2.4GHz
18 - radio led 5GHz
20 - usb led (on/off)
21 - usb power (on/off)
12 - reset button
23 - wps button
31 - radio (on/off)
Enjoy!
下载地址:
http://pan.baidu.com/s/1c1hp7fa
|
|