腾达AC9-刷华硕ac1200g+固件_安装Entware_扩展应用

sheshou73

犹豫着电信的ac9要不要试试看

无线无极限

天生的心 发表于 2017-4-16 08:11
多谢分亨！有什么远程下载的？

官方库里有aria2，迅雷也能用吧，没试。

无线无极限

sujian42007 发表于 2017-4-16 09:05
感谢分享，来张图就更完美了

就是几条命令，不讲究了，说明问题就行了

无线无极限

ninggu2008 发表于 2017-4-16 10:24
可惜华硕固件5g信号太弱了，而且还需要硬改，要是腾达ac9官方改版固件能这么操作就好了。

刷了US_Acrux1200-AC_V15.03.2.14_EN_NEX01.bin，貌似该固件不支持ext格式的U盘。而且telnet登陆后发现系统是只读文件，无法修改，需要重新编辑固件，，先放下吧，论坛里有大神出了修改后的定制版固件，等他完善吧。

yzy9952

mark一下，谢谢分享

无线无极限

entwareNG官方库里的一些软件貌似不能很好的运行在ac9上，摸索中。。。

xiaoboy

请问楼主 我这边迅雷无法获取磁盘剩余空间，怎么办？还有迅雷怎么加入自启动？  

无线无极限

xiaoboy 发表于 2017-4-17 22:02
请问楼主 我这边迅雷无法获取磁盘剩余空间，怎么办？还有迅雷怎么加入自启动？

首先确定存储设备正常挂载了，可以用 df  -h 查看，然后迅雷好像对设备容量有要求，我开始用读卡器加1g tf卡，也出现了你说的情况，后来换成16gU盘就好了。

fzzkevin

老哥。有多拨插件么

xiaoboy

无线无极限 发表于 2017-4-18 00:26
首先确定存储设备正常挂载了，可以用 df  -h 查看，然后迅雷好像对设备容量有要求，我开始用读卡器加1g t ...

我的是八十g的移动硬盘

xiaoboy

xiaoboy 发表于 2017-4-18 08:27
我的是八十g的移动硬盘

ext3格式，共享能访问。

xiaoboy

/tmp/mnt/file/Xware1.0.31_rt-ac56$ chmod 777 *
/tmp/mnt/file/Xware1.0.31_rt-ac56$ ./portal
initing...
try stopping xunlei service first...
killall: ETMDaemon: no process killed
killall: EmbedThunderManager: no process killed
killall: vod_httpserver: no process killed
setting xunlei runtime env...
port: 9000 is usable.

YOUR CONTROL PORT IS: 9000

starting xunlei service...
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
Connecting to 127.0.0.1:9000 (127.0.0.1:9000)
setting xunlei runtime env...
port: 9000 is usable.

YOUR CONTROL PORT IS: 9000

starting xunlei service...

getting xunlei service info...
the active key is not valid.

try again...(has tried 1 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 2 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 3 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 4 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 5 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 6 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 7 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 8 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 9 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 10 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 11 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 12 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 13 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 14 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 15 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 16 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 17 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 18 time(s)).
getting xunlei service info...
the active key is not valid.

try again...(has tried 19 time(s)).
getting xunlei service info...
the active key is not valid.
fail to get xunlei service info finaly.
finished.


有时候不会提示激活码，只出现过一次。


df -h命令 出现的 移动硬盘是正确挂载的
/tmp/mnt/file/Xware1.0.31_rt-ac56$ df -h
Filesystem                Size      Used Available Use% Mounted on
/dev/root                11.3M     11.3M         0 100% /
devtmpfs                 61.3M         0     61.3M   0% /dev
tmpfs                    61.4M    800.0K     60.6M   1% /tmp
/dev/mtdblock3            2.8M    244.0K      2.5M   9% /jffs
/dev/sda1                69.5G     10.8M     65.7G   0% /tmp/mnt/file

ps命令的迅雷进程

6914 admin      696 S    /tmp/mnt/file/Xware1.0.31_rt-ac56/lib/ETMDaemon /tmp
6917 admin     2736 S    /tmp/mnt/file/Xware1.0.31_rt-ac56/lib/vod_httpserver
6918 admin     6220 S    /tmp/mnt/file/Xware1.0.31_rt-ac56/lib/EmbedThunderMa
6919 admin     6220 S    /tmp/mnt/file/Xware1.0.31_rt-ac56/lib/EmbedThunderMa
6920 admin     6220 S    /tmp/mnt/file/Xware1.0.31_rt-ac56/lib/EmbedThunderMa
6921 admin     6220 S    /tmp/mnt/file/Xware1.0.31_rt-ac56/lib/EmbedThunderMa
6922 admin     6220 S    /tmp/mnt/file/Xware1.0.31_rt-ac56/lib/EmbedThunderMa
6923 admin     6220 S    /tmp/mnt/file/Xware1.0.31_rt-ac56/lib/EmbedThunderMa
6924 admin     6220 S    /tmp/mnt/file/Xware1.0.31_rt-ac56/lib/EmbedThunderMa
6925 admin     6220 S    /tmp/mnt/file/Xware1.0.31_rt-ac56/lib/EmbedThunderMa
6991 admin     1488 R    ps

无线无极限

xiaoboy 发表于 2017-4-18 15:52
/tmp/mnt/file/Xware1.0.31_rt-ac56$ chmod 777 *
/tmp/mnt/file/Xware1.0.31_rt-ac56$ ./portal
initing ...

正常，迅雷就是那个德行，不然也不会放弃维护xware3.0，让人去买那个什么宝下载器。1.0.31就这样了，隔三差五抽下风。你用命令
/.../......./portal -s
/.../......./portal
重启服务，多试几次。再不行就解绑设备，重新绑定。

ps:  aria2多好。。。

bchf2003

多谢分亨！

56143575

不错的帖子 ac9装系统