R6300V1TTL进入CFE失败，跪求大神！

只需再向

R6300V1

CFE for R6300 version: v1.0.2
Build Date: Wed Apr 25 16:29:10 CST 2012
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found an ST compatible serial flash with 32 64KB blocks; total size 2MB
Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138
CPU type 0x19749: 600MHz
Tot mem: 131072 KBytes

Device eth0:  hwaddr 9C-D3-6D-A3-AA-C3, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Loader:raw Filesys:tftp Dev:eth0 File:192.168.1.2:vmlinuz Optionsnull)
Loading: Failed.
Could not load 192.168.1.2:vmlinuz: Timeout occured
Checking crc...Loader:raw Filesys:raw Dev:nflash0.os File: Optionsnull)
Loading: ....... 4018240 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000

第一次用SecureCRT刷DDWRT成功了，但是闲着没事想刷个梅林，不知道哪出了问题就变砖了。Ctrl+C不能中止CFE启动，黔驴技穷，跪求大神！

h54953

v1刷梅林  ！

横水渡

h54953 发表于 2018-11-14 06:33
v1刷梅林  ！

v2才可以刷梅林。v1刷不了呢