瘦刷胖以后设置问题求助帖

anran30

高价收个Cisco 2702I-H-K9瘦刷胖以后设置成二级路由，想WEB登录管理，咋配置都不行，求助大佬帮忙，具体信息：



IOS Bootloader - Starting system.
flash is writable
Antigua Board
40MB format
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 310 files, 14 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 28247552
flashfs[0]: Bytes available: 12911104
flashfs[0]: flashfs fsck took 15 seconds.
Base Ethernet MAC address: 84:3d:c6:07:0e:68
Ethernet speed is 100 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w7-mx.153-3.JPN/ap3g2-k9w7-mx.153-3.JPN"...#############
############


File "flash:/ap3g2-k9w7-mx.153-3.JPN/ap3g2-k9w7-mx.153-3.JPN" uncompressed and i
nstalled, entry point: 0x2003000
executing...


Secondary Bootloader - Starting system.
Antigua Board Pre-Pilot
40MB format
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 310 files, 14 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 28247552
flashfs[0]: Bytes available: 12911104
flashfs[0]: flashfs fsck took 17 seconds.
flashfs[1]: 0 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 12257280
flashfs[1]: Bytes used: 1024
flashfs[1]: Bytes available: 12256256
flashfs[1]: flashfs fsck took 0 seconds.
Base Ethernet MAC address: 84:3d:c6:07:0e:68
Unable to locate IOS image with name **xx**.
Boot CMD: 'boot  flash:/ap3g2-k9w7-mx.153-3.JPN/ap3g2-k9w7-xx.153-3.JPN'
Loading "flash:/ap3g2-k9w7-mx.153-3.JPN/ap3g2-k9w7-xx.153-3.JPN"...#############
###############################
File "flash:/ap3g2-k9w7-mx.153-3.JPN/ap3g2-k9w7-xx.153-3.JPN" uncompressed and i
nstalled, entry point: 0x1003000
executing...


              Restricted Rights Legend


Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.


           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706






Cisco IOS Software, C2700 Software (AP3G2-K9W7-M), Version 15.3(3)JPN, RELEASE S
OFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2022 by Cisco Systems, Inc.
Compiled Fri 29-Jul-22 03:38 by mcpre


Antigua Board Pre-Pilot
40MB format
Tide XL MB - 40MB of flash
Initializing flashfs...


flashfs[2]: 310 files, 14 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 40900608
flashfs[2]: Bytes used: 28247552
flashfs[2]: Bytes available: 12653056
flashfs[2]: flashfs fsck took 16 seconds.
flashfs[2]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCCCCCCC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...C
Uncompressing radio files...
...done Initializing flashfs.


Radio0  present 8764 8000 0 A8000000 A8010000 0
Rate table has 650 entries (20 legacy/224 11n/406 11ac)


POWER TABLE FILENAME = ram:/U2.bin


Radio1  present 8864 8000 0 80000000 80100000 4
POWER TABLE FILENAME = ram:/U5.bin


Radio2 not present 0 0 0 0 0 8
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.


A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html


If you require further assistance please contact us by sending email to
export@cisco.com.


cisco AIR-SAP2702I-H-K9 (PowerPC) processor (revision A0) with 376814K/134656K b
ytes of memory.
Processor board ID FGL2031X751
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radios


32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 84:3D:C6:07:0E:68
Part Number                          : 73-15824-03
PCB Serial Number                    : FOC20292P09
Top Assembly Part Number             : 800-41174-03
Top Assembly Serial Number           : FGL2031X751
Top Revision Number                  : A0
Product/Model Number                 : AIR-CAP2702I-H-K9


System is configured with default enable secret.Please change it before enablin
g HTTP Server






Press RETURN to get started!




*Mar  1 00:00:20.811: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self t
est passed (15)
*Mar  1 00:00:26.971: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 0 (4)
*Mar  1 00:00:27.083: loading Power Tables from ram:/U2.bin. Class = E
*Mar  1 00:00:27.087:  record size of 3ss: 1168 read_ptr: 4955626


*Mar  1 00:00:32.287: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 1 (4)
*Mar  1 00:00:32.331: loading Power Tables from ram:/U5.bin. Class = H
*Mar  1 00:00:32.367:  record size of vht: 2904 read_ptr: 4955626


*Mar  1 00:00:32.427: Starting Ethernet promiscuous mode
*Mar  1 00:00:32.503: SCHED: Ethernet Bridge Process: install watched boolean Sy
stem Initialized(493D86C), os:1 ah:0
*Mar  1 00:00:34.599: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state
to up
*Mar  1 00:00:34.599: %LINK-6-UPDOWN: Interface GigabitEthernet1, changed state
to up
*Mar  1 00:00:34.991: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface
Dot11Radio0 due to the reason code 39
*Mar  1 00:00:34.991: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface
Dot11Radio1 due to the reason code 39
*Mar  1 00:00:35.019: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface
Dot11Radio0 due to the reason code 10
*Mar  1 00:00:35.027: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface
Dot11Radio1 due to the reason code 10
*Mar  1 00:00:35.031: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface
Dot11Radio1 due to the reason code 40
*Mar  1 00:00:35.031: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface
Dot11Radio1 due to the reason code 10
*Mar  1 00:00:35.235: %SYS-5-CONFIG_I: Configured from memory by console
*Mar  1 00:00:35.399: SCHED: Ethernet Bridge Process: remove watched boolean Sys
tem Initialized(493D86C)
*Mar  1 00:00:35.399: SCHED: Ethernet Bridge Process: install watched queue Soap
BVI input queue(492FF74), os:0 ah:0
*Mar  1 00:00:35.399: %CDP_PD-4-POWER_OK: Full power - HIGH_POWER inline power s
ource
*Mar  1 00:00:35.415: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Mar  1 00:00:35.415: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r
eset
*Mar  1 00:00:35.607: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to down
*Mar  1 00:00:35.607: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet1, changed state to down
*Mar  1 00:00:36.043: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to up
*Mar  1 00:00:36.415: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
*Mar  1 00:00:36.415: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to down
*Mar  1 00:00:36.487: %DOT11-6-FREQ_SCAN: Interface Dot11Radio0, Scanning freque
ncies for 29 seconds
*Mar  1 00:00:40.107: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self tes
t passed (0-0)
*Mar  1 00:00:40.107: DPAA Initialization Complete
*Mar  1 00:00:40.107: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exite
d
*Mar  1 00:00:41.383: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5745
selected
*Mar  1 00:00:41.403: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up


*Mar  1 00:00:41.411: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to do
wn
*Mar  1 00:00:41.419: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r
eset
*Mar  1 00:00:42.471: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up


*Mar  1 00:00:43.403: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar  1 00:00:43.471: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to up
*Mar  1 00:00:44.403: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to down
*Mar  1 00:00:47.019: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Mar  1 00:00:48.019: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to up
*Mar  1 00:01:12.391: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface
Dot11Radio0 due to the reason code 21
*Mar  1 00:01:12.399: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2432
selected
*Mar  1 00:01:12.411: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up


*Mar  1 00:01:12.419: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to do
wn
*Mar  1 00:01:12.427: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Mar  1 00:01:13.455: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up


*Mar  1 00:01:14.455: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to up

anran30

按百度里搜到的命令咋配置都不行，没办法进WBE管理页面，超级终端可以，我简单配置了WiFi，5G还出不来，求大神帮忙

anran30

没有人说话呢