|
|
[ 0.000000] Linux version 4.19.88 (ubuntu@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r1772-06d7b809)) #0 SMP Wed Dec 11 03:48:48 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=8233D8A7-A970-4A36-A18E-C34F57EA0002 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.000000] BIOS disabled fast string operation, re-enabled sucessfully.
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f445fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f446000-0x000000007f48cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f48d000-0x000000007f49dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f49e000-0x000000007f4a5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f4a6000-0x000000007f4c0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f4c1000-0x000000007f4c1fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f4c2000-0x000000007f4ddfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f4de000-0x000000007f4e8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f4e9000-0x000000007f50afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f50b000-0x000000007f5eafff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f5eb000-0x000000007f6e6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f6e7000-0x000000007f6effff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed14000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: /, BIOS 4.6.4 08/30/2013
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1862.133 MHz processor
[ 0.004214] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.004220] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.004241] last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[ 0.004249] MTRR default type: uncachable
[ 0.004251] MTRR fixed ranges enabled:
[ 0.004254] 00000-9FFFF write-back
[ 0.004257] A0000-BFFFF uncachable
[ 0.004259] C0000-CFFFF write-protect
[ 0.004262] D0000-E7FFF uncachable
[ 0.004264] E8000-FFFFF write-protect
[ 0.004266] MTRR variable ranges enabled:
[ 0.004270] 0 base 000000000 mask F80000000 write-back
[ 0.004273] 1 base 07F700000 mask FFFF00000 write-through
[ 0.004276] 2 base 07F800000 mask FFF800000 uncachable
[ 0.004278] 3 disabled
[ 0.004279] 4 disabled
[ 0.004281] 5 disabled
[ 0.004282] 6 disabled
[ 0.004500] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.017352] found SMP MP-table at [mem 0x000fcce0-0x000fccef]
[ 0.017414] BRK [0x02401000, 0x02401fff] PGTABLE
[ 0.017421] BRK [0x02402000, 0x02402fff] PGTABLE
[ 0.017425] BRK [0x02403000, 0x02403fff] PGTABLE
[ 0.017726] BRK [0x02404000, 0x02404fff] PGTABLE
[ 0.019037] BRK [0x02405000, 0x02405fff] PGTABLE
[ 0.019954] BRK [0x02406000, 0x02406fff] PGTABLE
[ 0.020315] ACPI: Early table checksum verification disabled
[ 0.020817] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 0.020835] ACPI: XSDT 0x000000007F49E068 00004C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.020867] ACPI: FACP 0x000000007F4A4F48 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.020901] ACPI: DSDT 0x000000007F49E140 006E06 (v02 ALASKA A M I 00000DE2 INTL 20051117)
[ 0.020928] ACPI: FACS 0x000000007F4E2F80 000040
[ 0.020951] ACPI: APIC 0x000000007F4A5040 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.020977] ACPI: MCFG 0x000000007F4A50B8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.021004] ACPI: HPET 0x000000007F4A50F8 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.021028] ACPI: SSDT 0x000000007F4A5130 000655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.021085] ACPI: Local APIC address 0xfee00000
[ 0.022377] Zone ranges:
[ 0.022387] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.022394] DMA32 [mem 0x0000000001000000-0x000000007f6effff]
[ 0.022401] Normal empty
[ 0.022406] Movable zone start for each node
[ 0.022411] Early memory node ranges
[ 0.022417] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.022423] node 0: [mem 0x0000000000100000-0x000000007f445fff]
[ 0.022429] node 0: [mem 0x000000007f4c1000-0x000000007f4c1fff]
[ 0.022434] node 0: [mem 0x000000007f50b000-0x000000007f5eafff]
[ 0.022440] node 0: [mem 0x000000007f6e7000-0x000000007f6effff]
[ 0.022459] Reserved but unavailable: 99 pages
[ 0.022464] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6effff]
[ 0.022474] On node 0 totalpages: 521421
[ 0.022478] DMA zone: 64 pages used for memmap
[ 0.022482] DMA zone: 21 pages reserved
[ 0.022485] DMA zone: 3997 pages, LIFO batch:0
[ 0.022888] DMA32 zone: 8092 pages used for memmap
[ 0.022891] DMA32 zone: 517424 pages, LIFO batch:63
[ 0.061957] ACPI: PM-Timer IO Port: 0x408
[ 0.061964] ACPI: Local APIC address 0xfee00000
[ 0.061980] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.062003] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.062011] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.062017] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.062023] ACPI: IRQ0 used by override.
[ 0.062026] ACPI: IRQ9 used by override.
[ 0.062031] Using ACPI (MADT) for SMP configuration information
[ 0.062036] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.062048] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.062117] [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.062121] Booting paravirtualized kernel on bare hardware
[ 0.062130] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.062164] random: get_random_bytes called from start_kernel+0x85/0x552 with crng_init=0
[ 0.062185] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.064123] percpu: Embedded 41 pages/cpu s128344 r8192 d31400 u524288
[ 0.064147] pcpu-alloc: s128344 r8192 d31400 u524288 alloc=1*2097152
[ 0.064150] pcpu-alloc: [0] 0 1 2 3
[ 0.064216] Built 1 zonelists, mobility grouping on. Total pages: 513244
[ 0.064225] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=8233D8A7-A970-4A36-A18E-C34F57EA0002 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.065781] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.066538] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.066640] Calgary: detecting Calgary via BIOS EBDA area
[ 0.066645] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.113796] Memory: 2026784K/2085684K available (10248K kernel code, 575K rwdata, 2064K rodata, 1068K init, 2368K bss, 58900K reserved, 0K cma-reserved)
[ 0.113933] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.114060] rcu: Hierarchical RCU implementation.
[ 0.114067] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.114071] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.114076] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.114104] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[ 0.114514] spurious 8259A interrupt: IRQ7.
[ 0.117190] Console: colour VGA+ 80x25
[ 0.126791] console [tty0] enabled
[ 0.161417] console [ttyS0] enabled
[ 0.161684] ACPI: Core revision 20180810
[ 0.162278] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.162833] hpet clockevent registered
[ 0.162846] APIC: Switch to symmetric I/O mode setup
[ 0.163790] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.212846] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x35aee0dd21a, max_idle_ns: 881590475566 ns
[ 0.213438] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.26 BogoMIPS (lpj=18621330)
[ 0.214036] pid_max: default: 32768 minimum: 301
[ 0.214421] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.214817] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.215655] CPU0: Thermal monitoring enabled (TM2)
[ 0.215972] process: using mwait in idle threads
[ 0.216273] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.216604] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.217164] Freeing SMP alternatives memory: 32K
[ 0.346043] smpboot: CPU0: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz (family: 0x6, model: 0x36, stepping: 0x1)
[ 0.346910] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[ 0.347421] ... version: 3
[ 0.347693] ... bit width: 40
[ 0.347970] ... generic registers: 2
[ 0.348244] ... value mask: 000000ffffffffff
[ 0.348570] ... max period: 000000007fffffff
[ 0.348895] ... fixed-purpose events: 3
[ 0.349168] ... event mask: 0000000700000003
[ 0.349608] rcu: Hierarchical SRCU implementation.
[ 0.350274] smp: Bringing up secondary CPUs ...
[ 0.350843] x86: Booting SMP configuration:
[ 0.351132] .... node #0, CPUs: #1
[ 0.353344] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.353436] Measured 4263 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.353436] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.353436] #2 #3
[ 0.353436] smp: Brought up 1 node, 4 CPUs
[ 0.353729] smpboot: Max logical packages: 1
[ 0.354014] smpboot: Total of 4 processors activated (14897.06 BogoMIPS)
[ 0.355992] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.356571] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.357073] pinctrl core: initialized pinctrl subsystem
[ 0.357906] NET: Registered protocol family 16
[ 0.359213] cpuidle: using governor ladder
[ 0.359681] ACPI: bus type PCI registered
[ 0.359958] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.360476] PCI: Using configuration type 1 for base access
[ 0.370843] cryptd: max_cpu_qlen set to 1000
[ 0.371796] ACPI: Added _OSI(Module Device)
[ 0.371796] ACPI: Added _OSI(Processor Device)
[ 0.371796] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.371796] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.371796] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.371829] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.373494] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.383455] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.383455] ACPI: Dynamic OEM Table Load:
[ 0.383455] ACPI: SSDT 0xFFFF88807CB35400 0002A7 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.383455] ACPI: Dynamic OEM Table Load:
[ 0.383455] ACPI: SSDT 0xFFFF88807CB59000 0006D5 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.383455] ACPI: Dynamic OEM Table Load:
[ 0.383455] ACPI: SSDT 0xFFFF88807CBC7600 0001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.383455] ACPI: Dynamic OEM Table Load:
[ 0.383455] ACPI: SSDT 0xFFFF88807C95F240 00008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.385617] ACPI: Interpreter enabled
[ 0.385896] ACPI: (supports S0 S5)
[ 0.386147] ACPI: Using IOAPIC for interrupt routing
[ 0.386552] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.387709] ACPI: Enabled 14 GPEs in block 00 to 1F
[ 0.416878] ACPI: Power Resource [FN00] (off)
[ 0.418194] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.418194] acpi PNP0A08:00: _OSC: OS supports [Segments MSI]
[ 0.418194] acpi PNP0A08:00: _OSC failed (AE_ERROR)
[ 0.418306] PCI host bridge to bus 0000:00
[ 0.418306] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.418306] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.418306] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.418306] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.418306] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff window]
[ 0.418306] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.418306] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff window]
[ 0.418306] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.418306] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.418306] pci 0000:00:00.0: [8086:0bf2] type 00 class 0x060000
[ 0.418694] pci 0000:00:02.0: [8086:0be2] type 00 class 0x030000
[ 0.418694] pci 0000:00:02.0: reg 0x10: [mem 0xdfb00000-0xdfbfffff]
[ 0.418694] pci 0000:00:02.0: reg 0x14: [io 0xf100-0xf107]
[ 0.423456] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.423456] pci 0000:00:1b.0: reg 0x10: [mem 0xdff00000-0xdff03fff 64bit]
[ 0.423456] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.425434] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.425434] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.425677] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.425677] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.426135] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.426135] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.426516] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.426516] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.426895] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.426895] pci 0000:00:1d.0: reg 0x20: [io 0xf0a0-0xf0bf]
[ 0.427269] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.427269] pci 0000:00:1d.1: reg 0x20: [io 0xf080-0xf09f]
[ 0.427653] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.427653] pci 0000:00:1d.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.427993] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.427993] pci 0000:00:1d.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.428311] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.428311] pci 0000:00:1d.7: reg 0x10: [mem 0xdff05000-0xdff053ff]
[ 0.428311] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.428661] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.428978] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 0.429376] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.429376] pci 0000:00:1f.2: reg 0x10: [io 0xf0f0-0xf0f7]
[ 0.429376] pci 0000:00:1f.2: reg 0x14: [io 0xf0e0-0xf0e3]
[ 0.429376] pci 0000:00:1f.2: reg 0x18: [io 0xf0d0-0xf0d7]
[ 0.429376] pci 0000:00:1f.2: reg 0x1c: [io 0xf0c0-0xf0c3]
[ 0.429376] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf02f]
[ 0.429376] pci 0000:00:1f.2: reg 0x24: [mem 0xdff04000-0xdff043ff]
[ 0.429376] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.429692] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.429692] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.430440] pci 0000:01:00.0: [8086:4238] type 00 class 0x028000
[ 0.430440] pci 0000:01:00.0: reg 0x10: [mem 0xdfe00000-0xdfe01fff 64bit]
[ 0.430440] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.430753] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.430753] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.430856] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.430856] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.430856] pci 0000:02:00.0: reg 0x18: [mem 0xdfd04000-0xdfd04fff 64bit pref]
[ 0.430856] pci 0000:02:00.0: reg 0x20: [mem 0xdfd00000-0xdfd03fff 64bit pref]
[ 0.430856] pci 0000:02:00.0: supports D1 D2
[ 0.430856] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.431375] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.431375] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.431375] pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.431824] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.431824] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.431824] pci 0000:03:00.0: reg 0x18: [mem 0xdfc04000-0xdfc04fff 64bit pref]
[ 0.431824] pci 0000:03:00.0: reg 0x20: [mem 0xdfc00000-0xdfc03fff 64bit pref]
[ 0.431824] pci 0000:03:00.0: supports D1 D2
[ 0.431824] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.432271] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.432271] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.432271] pci 0000:00:1c.2: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.433449] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.433449] pci_bus 0000:05: extended config space not accessible
[ 0.433449] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.433449] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.433449] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.433449] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.433449] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.433449] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff window] (subtractive decode)
[ 0.433449] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.433449] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0x7fffffff window] (subtractive decode)
[ 0.433449] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[ 0.433449] pci_bus 0000:00: on NUMA node 0
[ 0.434402] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.434402] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.434402] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.434402] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.434402] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.434402] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.434402] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.434402] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 *4 5 6 7 11 12 14 15)
[ 0.442305] SCSI subsystem initialized
[ 0.442875] libata version 3.00 loaded.
[ 0.442875] ACPI: bus type USB registered
[ 0.442917] usbcore: registered new interface driver usbfs
[ 0.443347] usbcore: registered new interface driver hub
[ 0.444120] usbcore: registered new device driver usb
[ 0.444560] PCI: Using ACPI for IRQ routing
[ 0.444560] PCI: pci_cache_line_size set to 64 bytes
[ 0.444560] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.444560] e820: reserve RAM buffer [mem 0x7f446000-0x7fffffff]
[ 0.444560] e820: reserve RAM buffer [mem 0x7f4c2000-0x7fffffff]
[ 0.444560] e820: reserve RAM buffer [mem 0x7f5eb000-0x7fffffff]
[ 0.444560] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[ 0.445696] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.445696] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.445758] clocksource: Switched to clocksource hpet
[ 0.450830] pnp: PnP ACPI init
[ 0.450891] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.451527] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.451959] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.451959] system 00:01: [io 0xffff] has been reserved
[ 0.451959] system 00:01: [io 0xffff] has been reserved
[ 0.451959] system 00:01: [io 0xffff] has been reserved
[ 0.451959] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.451959] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.451959] system 00:01: [io 0x0600-0x061f] has been reserved
[ 0.452085] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.452085] system 00:02: [io 0x06a0-0x06af] has been reserved
[ 0.452085] system 00:02: [io 0x06b0-0x06ff] has been reserved
[ 0.452085] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.452085] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.452085] system 00:04: [io 0x0295-0x0296] has been reserved
[ 0.452085] system 00:04: [io 0x0a00-0x0a01] has been reserved
[ 0.452085] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.452085] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.452085] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.452085] pnp 00:07: [dma 0 disabled]
[ 0.452085] pnp 00:07: Plug and Play ACPI device, IDs FIT0002 (active)
[ 0.452085] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.452085] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.452268] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.452575] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.452970] system 00:0a: [mem 0x00000000-0x00003fff] could not be reserved
[ 0.453368] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.453825] system 00:0a: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.454235] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.454638] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455174] system 00:0b: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.455570] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.455968] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.456357] system 00:0c: [io 0x0400-0x047f] has been reserved
[ 0.456722] system 00:0c: [io 0x0500-0x053f] has been reserved
[ 0.457078] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.457474] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.457857] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.458240] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 0.458638] system 00:0c: [mem 0xffe00000-0xffffffff] has been reserved
[ 0.459035] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.459045] pnp: PnP ACPI: found 13 devices
[ 0.467410] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.467975] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.467982] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.468001] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.468024] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.468042] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.468048] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.468053] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ 0.468096] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.468586] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.469075] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.469558] pci 0000:00:1c.3: BAR 8: assigned [mem 0x80600000-0x807fffff]
[ 0.469957] pci 0000:00:1c.3: BAR 9: assigned [mem 0x80800000-0x809fffff 64bit pref]
[ 0.470437] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 0.470800] pci 0000:00:1c.3: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.471166] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.471482] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.471849] pci 0000:00:1c.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.473422] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.473942] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.474259] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.474626] pci 0000:00:1c.1: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.475018] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.475505] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.475821] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.476187] pci 0000:00:1c.2: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.476580] pci 0000:00:1c.2: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.477067] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.477382] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.477749] pci 0000:00:1c.3: bridge window [mem 0x80600000-0x807fffff]
[ 0.478141] pci 0000:00:1c.3: bridge window [mem 0x80800000-0x809fffff 64bit pref]
[ 0.478628] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.478961] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.478965] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.478970] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.478973] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.478977] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff window]
[ 0.478981] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff window]
[ 0.478985] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff window]
[ 0.478989] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff window]
[ 0.478993] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.478997] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
[ 0.479001] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.479005] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.479009] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.479013] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.479016] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.479020] pci_bus 0000:03: resource 1 [mem 0xdfc00000-0xdfcfffff]
[ 0.479024] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.479028] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.479032] pci_bus 0000:04: resource 1 [mem 0x80600000-0x807fffff]
[ 0.479036] pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[ 0.479040] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.479044] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.479048] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.479052] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff window]
[ 0.479056] pci_bus 0000:05: resource 8 [mem 0x000e0000-0x000effff window]
[ 0.479060] pci_bus 0000:05: resource 9 [mem 0x000f0000-0x000fffff window]
[ 0.479064] pci_bus 0000:05: resource 10 [mem 0x7f800000-0x7fffffff window]
[ 0.479068] pci_bus 0000:05: resource 11 [mem 0x80000000-0xfebfffff window]
[ 0.479290] NET: Registered protocol family 2
[ 0.479970] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[ 0.480486] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.481030] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.481540] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.482043] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.482436] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.482981] NET: Registered protocol family 1
[ 0.483322] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.485247] PCI: CLS 64 bytes, default 64
[ 0.487998] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 0.493122] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.495040] io scheduler noop registered
[ 0.495323] io scheduler deadline registered (default)
[ 0.495893] gpio_it87: no device
[ 0.497236] hv_vmbus: registering driver hv_pci
[ 0.497586] hv_vmbus: registering driver hyperv_fb
[ 0.498153] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.498719] ACPI: Power Button [PWRB]
[ 0.499097] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.499629] ACPI: Sleep Button [SLPB]
[ 0.500006] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.500521] ACPI: Power Button [PWRF]
[ 0.502159] Monitor-Mwait will be used to enter C-1 state
[ 0.504575] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.504930] ACPI: Thermal Zone [THRM] (4 C)
[ 0.505498] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.505847] ACPI: Thermal Zone [TZ00] (27 C)
[ 0.506874] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.507219] ACPI: Thermal Zone [TZ01] (27 C)
[ 0.507867] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.509247] Non-volatile memory driver v1.3
[ 0.512919] loop: module loaded
[ 0.513297] Guest personality initialized and is inactive
[ 0.513782] VMCI host device registered (name=vmci, major=10, minor=63)
[ 0.514175] Initialized host personality
[ 0.514630] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000042F (\SWC1) (20180810/utaddress-213)
[ 0.515496] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180810/utaddress-213)
[ 0.516348] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.516929] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20180810/utaddress-213)
[ 0.517780] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.518358] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20180810/utaddress-213)
[ 0.519211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.519789] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.520364] VMware PVSCSI driver - version 1.0.7.0-k
[ 0.520748] hv_vmbus: registering driver hv_storvsc
[ 0.521756] ahci 0000:00:1f.2: version 3.0
[ 0.522080] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.522518] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.523015] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
[ 0.524617] scsi host0: ahci
[ 0.525246] scsi host1: ahci
[ 0.525737] scsi host2: ahci
[ 0.526304] scsi host3: ahci
[ 0.526659] ata1: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04100 irq 24
[ 0.527135] ata2: SATA max UDMA/133 abar m1024@0xdff04000 port 0xdff04180 irq 24
[ 0.527598] ata3: DUMMY
[ 0.527809] ata4: DUMMY
[ 0.528693] VMware vmxnet3 virtual NIC driver - version 1.4.16.0-k-NAPI
[ 0.529304] hv_vmbus: registering driver hv_netvsc
[ 0.529633] Fusion MPT base driver 3.04.20
[ 0.529909] Copyright (c) 1999-2008 LSI Corporation
[ 0.530228] Fusion MPT SPI Host driver 3.04.20
[ 0.530557] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.530944] ehci-pci: EHCI PCI platform driver
[ 0.531502] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.531845] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.532332] ehci-pci 0000:00:1d.7: debug port 1
[ 0.536543] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.536575] ehci-pci 0000:00:1d.7: irq 23, io mem 0xdff05000
[ 0.563520] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.564301] hub 1-0:1.0: USB hub found
[ 0.564612] hub 1-0:1.0: 8 ports detected
[ 0.565534] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.565927] ohci-pci: OHCI PCI platform driver
[ 0.566264] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.566833] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.567174] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.567688] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f0a0
[ 0.568442] hub 2-0:1.0: USB hub found
[ 0.568742] hub 2-0:1.0: 2 ports detected
[ 0.569481] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.569822] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.570352] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f080
[ 0.571080] hub 3-0:1.0: USB hub found
[ 0.571377] hub 3-0:1.0: 2 ports detected
[ 0.572100] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.572440] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.572965] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f060
[ 0.573782] hub 4-0:1.0: USB hub found
[ 0.574080] hub 4-0:1.0: 2 ports detected
[ 0.574792] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.575135] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.575661] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f040
[ 0.576404] hub 5-0:1.0: USB hub found
[ 0.576707] hub 5-0:1.0: 2 ports detected
[ 0.577479] usbcore: registered new interface driver usb-storage
[ 0.577994] i8042: PNP: PS/2 Controller [PNP0303 S2K,PNP0f03S2M] at 0x60,0x64 irq 1,12
[ 0.579074] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.579403] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.579765] hv_vmbus: registering driver hyperv_keyboard
[ 0.580185] rtc_cmos 00:03: RTC can wake from S4
[ 0.580727] rtc_cmos 00:03: registered as rtc0
[ 0.581033] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.582338] sdhci: Secure Digital Host Controller Interface driver
[ 0.582727] sdhci: Copyright(c) Pierre Ossman
[ 0.583772] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.584173] hv_vmbus: registering driver hid_hyperv
[ 0.584539] usbcore: registered new interface driver usbhid
[ 0.584894] usbhid: USB HID core driver
[ 0.585177] hv_utils: Registering HyperV Utility Driver
[ 0.585501] hv_vmbus: registering driver hv_util
[ 0.585799] hv_vmbus: registering driver hv_balloon
[ 0.586686] NET: Registered protocol family 10
[ 0.587500] Segment Routing with IPv6
[ 0.587808] NET: Registered protocol family 17
[ 0.588122] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 0.588815] 8021q: 802.1Q VLAN Support v1.8
[ 0.589186] NET: Registered protocol family 40
[ 0.590132] mce: Using 5 MCE banks
[ 0.590509] microcode: sig=0x30661, pf=0x8, revision=0x10d
[ 0.590948] microcode: Microcode Update Driver: v2.2.
[ 0.591728] rtc_cmos 00:03: setting system clock to 2019-12-20 03:00:25 UTC (1576810825)
[ 0.855217] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.943502] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 1.145313] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 1.146161] scsi host4: usb-storage 1-2:1.0
[ 1.185211] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.185823] Waiting for root device PARTUUID=8233D8A7-A970-4A36-A18E-C34F57EA0002...
[ 2.154454] scsi 4:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
[ 2.156547] sd 4:0:0:0: [sda] 30375936 512-byte logical blocks: (15.6 GB/14.5 GiB)
[ 2.158153] sd 4:0:0:0: [sda] Write Protect is off
[ 2.158499] sd 4:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 2.159529] sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.180629] GPTrimary header thinks Alt. header is not at the end of the disk.
[ 2.181148] GPT:366624 != 30375935
[ 2.181421] GPT:Alternate GPT header not at the end of the disk.
[ 2.181811] GPT:366624 != 30375935
[ 2.182082] GPT: Use GNU Parted to correct GPT errors.
[ 2.182487] sda: sda1 sda2 sda3 sda4
[ 2.187038] sd 4:0:0:0: [sda] Attached SCSI removable disk
[ 2.204711] VFS: Mounted root (squashfs filesystem) readonly on device 8:4.
[ 2.210875] Freeing unused kernel image memory: 1068K
[ 2.263840] Write protecting the kernel read-only data: 16384k
[ 2.267870] Freeing unused kernel image memory: 2020K
[ 2.270933] Freeing unused kernel image memory: 2032K
[ 2.271305] Run /sbin/init as init process
[ 2.449963] random: fast init done
[ 2.552369] init: Console is alive
[ 3.869187] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.900037] pps_core: LinuxPPS API ver. 1 registered
[ 3.900429] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.907426] PTP clock support registered
[ 3.915307] Button Hotplug driver version 0.4.1
[ 3.916793] exFAT: Version 1.2.9
[ 3.917548] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.926314] init: - preinit -
[ 4.269929] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.298459] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.303437] random: jshn: uninitialized urandom read (4 bytes read)
[ 7.443115] mount_root: loading kmods from internal overlay
[ 7.476763] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 7.478979] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 7.735265] block: attempting to load /etc/config/fstab
[ 7.735688] block: unable to load configuration (fstab: Entry not found)
[ 7.736108] block: no usable configuration
[ 7.759767] urandom_read: 3 callbacks suppressed
[ 7.759773] random: procd: uninitialized urandom read (4 bytes read)
[ 7.922807] EXT4-fs (loop0): recovery complete
[ 7.924964] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[ 7.927173] mount_root: loading kmods from internal overlay
[ 7.957486] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 7.958275] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 8.001998] block: attempting to load /etc/config/fstab
[ 8.002467] block: unable to load configuration (fstab: Entry not found)
[ 8.002943] block: no usable configuration
[ 8.004525] mount_root: switching to ext4 overlay
[ 8.214783] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
[ 8.217200] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 8.226185] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 8.261991] procd: - early -
[ 8.889134] procd: - ubus -
[ 8.958080] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.960000] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.960505] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.961271] procd: - init -
[ 9.087173] kmodloader: loading kernel modules from /etc/modules.d/*
[ 9.118338] AVX or AES-NI instructions are not detected.
[ 9.195299] CPU feature 'AVX registers' is not supported.
[ 9.275519] CPU feature 'AVX registers' is not supported.
[ 9.356397] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way.
[ 9.437276] CPU feature 'AVX registers' is not supported.
[ 9.526393] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 9.526393] originally by Donald Becker <becker@scyld.com>
[ 9.526393] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 9.534311] NET: Registered protocol family 8
[ 9.534679] NET: Registered protocol family 20
[ 9.544314] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 9.552738] Initializing XFRM netlink socket
[ 9.553935] NET: Registered protocol family 15
[ 9.556147] Modular ISDN core version 1.1.29
[ 9.556549] NET: Registered protocol family 34
[ 9.557993] DSP module 2.0
[ 9.558238] mISDN_dsp: DSP clocks every 80 samples. This equals 1 jiffies.
[ 9.562801] mISDN: Layer-1-over-IP driver Rev. 2.00
[ 9.564153] 0 virtual devices registered
[ 9.579493] mISDN: HFC-multi driver 2.03
[ 9.595272] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 9.604192] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 9.604619] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 9.607865] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 9.608285] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 9.609840] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 9.610351] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 9.613435] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
[ 9.613987] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 9.615778] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 4.1.0-k
[ 9.616340] ixgbevf: Copyright (c) 2009 - 2015 Intel Corporation.
[ 9.620053] gre: GRE over IPv4 demultiplexor driver
[ 9.621358] ip_gre: GRE over IPv4 tunneling driver
[ 9.625907] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 9.635714] ISDN subsystem Rev: 1.1.2.3/
[ 9.635718] 1.1.2.2/
[ 9.636009] 1.1.2.3/
[ 9.636218] 1.1.2.2/
[ 9.636422] 1.1.2.2
[ 9.636625] loaded
[ 9.637783] PPP BSD Compression module registered
[ 9.638834] dss1_divert module successfully installed
[ 9.683110] cryptodev: driver 1.10 loaded.
[ 9.686352] i2c /dev entries driver
[ 9.695477] u32 classifier
[ 9.695719] input device check on
[ 9.695978] Actions configured
[ 9.697443] Mirror/redirect action on
[ 9.703262] fuse init (API version 7.27)
[ 9.706983] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 9.721213] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 9.721562] Copyright (c) 2007 Atheros Corporation.
[ 9.725781] Bridge firewalling registered
[ 9.727765] Loading modules backported from Linux version v4.19.85-0-gc63ee2939dc1
[ 9.728263] Backport generated by backports.git v4.19.85-1-0-g8a8be258
[ 9.730754] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 9.731132] e100: Copyright(c) 1999-2006 Intel Corporation
[ 9.733556] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 9.733925] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 9.741304] gigaset: Driver for Gigaset 307x
[ 9.741607] gigaset: ISDN4Linux interface
[ 9.744869] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 2.3.2-k
[ 9.745370] i40e: Copyright (c) 2013 - 2014 Intel Corporation.
[ 9.747402] i40evf: Intel(R) 40-10 Gigabit Virtual Function Network Driver - version 3.2.2-k
[ 9.747929] Copyright (c) 2013 - 2015 Intel Corporation.
[ 9.757792] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[ 9.817003] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 9.819849] PPP generic driver version 2.4.2
[ 9.820903] PPP MPPE Compression module registered
[ 9.822167] NET: Registered protocol family 24
[ 9.827463] usbcore: registered new interface driver r8152
[ 9.864231] libphy: r8169: probed
[ 9.865745] r8169 0000:02:00.0 eth0: RTL8168e/8111e, 00:30:18:c0:cf:9a, XID 2c200000, IRQ 25
[ 9.866320] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.888790] libphy: r8169: probed
[ 9.890282] r8169 0000:03:00.0 eth1: RTL8168e/8111e, 00:30:18:c0:cf:9b, XID 2c200000, IRQ 26
[ 9.890860] r8169 0000:03:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 9.893060] usbcore: registered new interface driver rtl8150
[ 9.900295] sis900.c: v1.08.10 Apr. 2 2006
[ 9.904320] sky2: driver version 1.30
[ 9.908944] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 9.910129] usbcore: registered new interface driver ums-alauda
[ 9.911045] usbcore: registered new interface driver ums-cypress
[ 9.911986] usbcore: registered new interface driver ums-datafab
[ 9.912951] usbcore: registered new interface driver ums-freecom
[ 9.913976] usbcore: registered new interface driver ums-isd200
[ 9.914941] usbcore: registered new interface driver ums-jumpshot
[ 9.915869] usbcore: registered new interface driver ums-karma
[ 9.916871] usbcore: registered new interface driver ums-sddr09
[ 9.917826] usbcore: registered new interface driver ums-sddr55
[ 9.918781] usbcore: registered new interface driver ums-usbat
[ 9.920045] usbcore: registered new interface driver usb_gigaset
[ 9.920418] usb_gigaset: USB Driver for Gigaset 307x using M105
[ 9.928298] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 9.958024] xt_time: kernel timezone is -0000
[ 9.962274] usbcore: registered new interface driver asix
[ 9.964372] usbcore: registered new interface driver ax88179_178a
[ 9.966177] usbcore: registered new interface driver bas_gigaset
[ 9.966556] bas_gigaset: USB Driver for Gigaset 307x
[ 9.971677] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10)
[ 10.050803] usbcore: registered new interface driver snd-usb-audio
[ 10.100409] usbcore: registered new interface driver rt2800usb
[ 10.111228] usbcore: registered new interface driver ath9k_htc
[ 10.119723] AVX or AES-NI instructions are not detected.
[ 10.207374] CPU feature 'AVX registers' is not supported.
[ 10.307976] CPU feature 'AVX registers' is not supported.
[ 10.399080] CPU feature 'AVX registers' is not supported.
[ 10.477194] twofish-x86_64-3way: performance on this CPU would be suboptimal: disabling twofish-x86_64-3way.
[ 10.553876] kmodloader: 8 modules could not be probed
[ 10.554321] kmodloader: - camellia-aesni-avx-x86_64 - 0
[ 10.554742] kmodloader: dependency not loaded camellia-aesni-avx-x86_64
[ 10.555219] kmodloader: - camellia-aesni-avx2 - 1
[ 10.555619] kmodloader: - cast5-avx-x86_64 - 0
[ 10.556005] kmodloader: - cast6-avx-x86_64 - 0
[ 10.556460] kmodloader: - serpent-avx-x86_64 - 0
[ 10.556851] kmodloader: dependency not loaded serpent-avx-x86_64
[ 10.557304] kmodloader: - serpent-avx2 - 1
[ 10.557687] kmodloader: dependency not loaded twofish-x86_64-3way
[ 10.558142] kmodloader: - twofish-avx-x86_64 - 1
[ 10.558535] kmodloader: - twofish-x86_64-3way - 0
[ 13.086608] xt_FULLCONENAT: RFC3489 Full Cone NAT module
[ 13.086608] xt_FULLCONENAT: Copyright (C) 2018 Chion Tang <tech@chionlab.moe>
[ 14.074013] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 14.630012] RTL8211DN Gigabit Ethernet r8169-200:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[ 14.893494] r8169 0000:02:00.0 eth0: No native access to PCI extended config space, falling back to CSI
[ 14.897251] br-lan: port 1(eth0) entered blocking state
[ 14.897603] br-lan: port 1(eth0) entered disabled state
[ 14.898159] device eth0 entered promiscuous mode
[ 14.898692] r8169 0000:02:00.0 eth0: Link is Down
[ 14.906878] br-lan: port 1(eth0) entered blocking state
[ 14.907264] br-lan: port 1(eth0) entered forwarding state
[ 14.907755] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 14.913305] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 15.186399] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 15.695265] br-lan: port 1(eth0) entered disabled state
[ 15.788338] random: crng init done
[ 17.084750] r8169 0000:02:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 17.085256] br-lan: port 1(eth0) entered blocking state
[ 17.085585] br-lan: port 1(eth0) entered forwarding state
[ 17.086182] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 22.846392] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 32.205408] r8169 0000:03:00.0 eth1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 32.205973] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 37.495092] pppoe-wan: renamed from ppp0
|
|
简体中文
繁體中文
English
日本語
Deutsch
한국 사람
بالعربية
TÜRKÇE
português
คนไทย
IP卡
狗仔卡
发表于 2019-12-19 20:19
显身卡