【求助】linksys 固件无法pppoe
固件：本人从git上编译的lede固件openwrt刷入路由器为：linksys1900acs主路由为华为A1：原厂固件没有动过，用于上网测试验证linksys
光猫:hg260gs 烽火光猫,已手动修改为brige 模式（打电话电信不给改，只能自己动手）
最终目的：linksys能够成功拨号后替换华为A1,单独linksys一个路由器上网
ip段分布：光猫192.168.1.1 华为A1:192.168.3.1 Linksys 192.168.50.1
测试过程：1.华为A1路由可以顺利pppo拨号，华为lan口接入linksys的wan口，同时linksys的wan口改为dhcp模式,linksys 可以正常上网，说明linksys wan口正常
2.撤掉华为A1,将光猫连接Linksys 的wan口，设置Linksys wan口pppoe拨号，一直无法成功，提示日志如下：
3.Linksys lan口为eth0，wan口为 eth1，交换机和etc/config/network设置如下图： wan vlan2options ports '4 6t'
lan valn1options ports '0 1 2 3 5t'
Wed Mar 25 01:23:12 2020 daemon.err insmod: module is already loaded - slhcWed Mar 25 01:23:12 2020 daemon.err insmod: module is already loaded - ppp_genericWed Mar 25 01:23:12 2020 daemon.err insmod: module is already loaded - pppoxWed Mar 25 01:23:12 2020 daemon.err insmod: module is already loaded - pppoeWed Mar 25 01:23:12 2020 daemon.info pppd: Plugin rp-pppoe.so loaded.Wed Mar 25 01:23:12 2020 daemon.info pppd: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.8Wed Mar 25 01:23:13 2020 daemon.notice pppd: pppd 2.4.8 started by root, uid 0Wed Mar 25 01:23:15 2020 user.info adblock-3.5.5-2: adblock is currently disabled, please set adb_enabled to '1' to use this serviceWed Mar 25 01:23:24 2020 daemon.notice netifd: Interface 'wan' is now downWed Mar 25 01:23:24 2020 daemon.notice netifd: Interface 'wan' is setting up nowWed Mar 25 01:23:24 2020 daemon.err insmod: module is already loaded - slhcWed Mar 25 01:23:24 2020 daemon.err insmod: module is already loaded - ppp_genericWed Mar 25 01:23:24 2020 daemon.err insmod: module is already loaded - pppoxWed Mar 25 01:23:24 2020 daemon.err insmod: module is already loaded - pppoeWed Mar 25 01:23:24 2020 daemon.info pppd: Plugin rp-pppoe.so loaded.Wed Mar 25 01:23:24 2020 daemon.info pppd: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.8Wed Mar 25 01:23:24 2020 daemon.notice pppd: pppd 2.4.8 started by root, uid 0Wed Mar 25 01:23:26 2020 user.info adblock-3.5.5-2: adblock is currently disabled, please set adb_enabled to '1' to use this serviceWed Mar 25 01:23:39 2020 daemon.warn pppd: Timeout waiting for PADO packetsWed Mar 25 01:23:39 2020 daemon.err pppd: Unable to complete PPPoE DiscoveryWed Mar 25 01:23:39 2020 daemon.info pppd: Exit.Wed Mar 25 01:23:39 2020 daemon.notice netifd: Interface 'wan' is now downWed Mar 25 01:23:39 2020 daemon.notice netifd: Interface 'wan' is setting up nowWed Mar 25 01:23:39 2020 daemon.err insmod: module is already loaded - slhcWed Mar 25 01:23:39 2020 daemon.err insmod: module is already loaded - ppp_genericWed Mar 25 01:23:39 2020 daemon.err insmod: module is already loaded - pppoxWed Mar 25 01:23:39 2020 daemon.err insmod: module is already loaded - pppoeWed Mar 25 01:23:39 2020 daemon.info pppd: Plugin rp-pppoe.so loaded.Wed Mar 25 01:23:39 2020 daemon.info pppd: RP-PPPoE plugin version 3.8p compiled against pppd 2.4.8Wed Mar 25 01:23:39 2020 daemon.notice pppd: pppd 2.4.8 started by root, uid 0Wed Mar 25 01:23:41 2020 user.info adblock-3.5.5-2: adblock is currently disabled, please set adb_enabled to '1' to use this service
各位高手帮忙看下 mut值有没有修改过？有的不是默认的1500的。 我也遇到了同样的问题，楼主解决了吗
页:
[1]