zowainfo 发表于 2020-11-11 00:28

请问不改硬件 怎么软刷 F3, N300 ?? $$

本帖最后由 zowainfo 于 2020-11-11 00:30 编辑


How to soft brush Tenda F3 and N300 without changing the hardware?

I need to use software to convert chinese to english

afeng11 发表于 2020-11-11 13:47

看了配置，闪存1M，内存8M，不硬改，就只能找对应的官方英文固件刷了

zowainfo 发表于 2020-11-11 14:47

yes ,you are right @afeng11 , with some comapny's official firmware or tool or some wise tricky ways have solutions, if some friends :handshake have please messages me, i can pay , :thanks 88

afeng11 发表于 2020-11-11 14:53

zowainfo 发表于 2020-11-11 14:47
yes ,you are right @afeng11 , with some comapny's official firmware or tool or some wise tricky ways ...

如果无法进入miniweb刷写，那就拆机上ttl刷，很简单的

afeng11 发表于 2020-11-11 15:17

对了 ，web刷是有校验的，所以不能直接刷

zowainfo 发表于 2020-11-11 19:52

afeng11 发表于 2020-11-11 15:17
对了 ，web刷是有校验的，所以不能直接刷

yes , you are right, but Chinese version firmware's (bootloader) have limitation ,restriction to stop flashing other Languageversionbut, i tried Global Version then flash Chinese firmware ,its done but can't back to Global Version firmware :((

zowainfo 发表于 2020-12-1 23:36

afeng11 发表于 2020-11-11 14:53
如果无法进入miniweb刷写，那就拆机上ttl刷，很简单的

please teach me for miniweb for Broadcom Chip tool ? how to flash ?

zowainfo 发表于 2020-12-9 16:19

我需要使用软件将：Tenda F3Tenda N300路由器中文转换为英文...

zowainfo 发表于 2021-1-13 00:37

:(:sleepy::sleepy::time:waiting...
页: [1]
查看完整版本: 请问不改硬件 怎么软刷 F3, N300 ?? $$