人生交响曲 发表于 2022-12-24 13:57

救砖的问题


Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   2: Load system code then write to Flash via TFTP.
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   7: Load Boot Loader code then write to Flash via Serial.
   9: Load Boot Loader code then write to Flash via TFTP.
default: 3


You choosed 1
                                                                              0




1: System Load Linux to SDRAM via TFTP.
Please Input new ones /or Ctrl-C to discard
      Input device IP (172.16.3.211) ==:192.168.1.20
      Input server IP (172.16.3.210) ==:192.168.1.20
      Input Linux Kernel filename (vme50) ==:ER-e50.recovery.v1.10.10.5210345.190714.1127.16de5fdde.img


netboot_common, argc= 3


NetTxPacket = 0x8FFE5B80


KSEG1ADDR(NetTxPacket) = 0xAFFE5B80


NetLoop,call eth_halt !


NetLoop,call eth_init !
Trying Eth0 (10/100-M)


Waitting for RX_DMA_BUSY status Start... done




ETH_STATE_ACTIVE!!
TFTP from server 192.168.1.20; our IP address is 192.168.1.20
Filename 'ER-e50.recovery.v1.10.10.5210345.190714.1127.16de5fdde.img'.


TIMEOUT_COUNT=10,Load address: 0x80a00000
Loading: Got ARP REQUEST, return our IP
Got ARP REQUEST, return our IP
checksum bad
checksum bad
checksum bad
checksum bad
Got ARP REQUEST, return our IP
Got ARP REQUEST, return our IP
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
Got ARP REQUEST, return our IP
T T T T T T T T T
线刷救砖出现以上问题，是不是ftpt设置的有问题


人生交响曲 发表于 2022-12-24 14:46

已解决，ftpt的问题
页: [1]
查看完整版本: 救砖的问题