本帖最后由 wildess 于 2023-9-24 23:28 编辑
如图,一级路由是品速R200 5g cpe,所有设备都能获取到24开头的ipv6地址,但是电脑A可以访问ipv6网站,电脑B、电脑C、电脑D却访问不了IPV6网站,这是怎么回事呢?
用过很多不同类型的cpe都没有这样的问题,就是品速R200有这个问题。
其他人也遇到同样的问题:
https://www.right.com.cn/forum/thread-8301888-1-2.html
https://www.right.com.cn/forum/thread-8292189-1-1.html
cat /etc/config/network
config interface 'loopback'
option device 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fdb1:58da:a031::/48'
option packet_steering '1'
config device
option name 'br-lan'
option type 'bridge'
list ports 'lan1'
list ports 'lan2'
list ports 'lan3'
config device
option name 'lan1'
config device
option name 'lan2'
config device
option name 'lan3'
config interface 'lan'
option device 'br-lan'
option proto 'static'
option ipaddr '192.168.3.1'
option netmask '255.255.255.0'
option ip6assign '60'
config device
option name 'wan'
config interface 'wan'
option proto 'dhcp'
option type 'bridge'
option device 'phy1-sta0'
config interface 'wan6'
option proto 'dhcpv6'
option type 'bridge'
option reqaddress 'try'
option reqprefix 'auto'
option device 'phy1-sta0'
config interface 'wwan'
option proto 'dhcp' cat /etc/config/dhcp
config dnsmasq
option domainneeded '1'
option localise_queries '1'
option rebind_protection '0'
option local '/lan/'
option domain 'lan'
option expandhosts '1'
option cachesize '4096'
option authoritative '1'
option readethers '1'
option leasefile '/tmp/dhcp.leases'
option resolvfile '/tmp/resolv.conf.d/resolv.conf.auto'
option localservice '0'
option ednspacket_max '1232'
option dnsforwardmax '4096'
config dhcp 'lan'
option interface 'lan'
option start '100'
option limit '150'
option leasetime '12h'
option dhcpv4 'server'
option force '1'
option ra 'relay'
option dhcpv6 'relay'
option ndp 'relay'
config dhcp 'wan'
option interface 'wan'
option ignore '1'
config dhcp 'wan6'
option interface 'wan6'
option ignore '1'
option master '1'
option ra 'relay'
option dhcpv6 'relay'
option ndp 'relay'
config odhcpd 'odhcpd'
option maindhcp '0'
option leasefile '/tmp/hosts/odhcpd'
option leasetrigger '/usr/sbin/odhcpd-update'
option loglevel '4'
因为ipv6没有pd前缀,所以openwrt的ipv6是设置为中继模式的。
请不要胡乱输入以及粘贴、复制等方式灌水
请尊重作者、并共同维护网站的正常阅读,否则账户将会被限制发帖、回帖,站内短信以及阅读权限等都会受到影响,谢谢。
具体限制方式:https://www.right.com.cn/forum/thread-8307840-1-1.html
|