再次折腾赚钱宝二代 openwrt clash aria2 php7 有道云

hbw***

因为某些需求 再次提及赚钱宝 pro 二代做一个旁路由
旁路由设置方法：
赚钱宝网口插交换机口或者LAN口，其他设备在同级路由下，把设备的网络设置网关和DNS，设置成旁路由的IP即可
在sillydanny的基础上更改的，如果看原始的功能更齐全
这里只是发下自己目前在不报错的情况下需要的代码

1. 2021年了, 大家还记得迅雷赚钱宝吗? 记一次OpenWrt软件安装
   
2. https://www.right.com.cn/forum/thread-4126356-1-1.html

复制代码

用到的代码

1. opkg update #更新库
   
2. opkg install nano resize2fs #安装nano编辑器 和扩展软件包
   
3. resize2fs  /dev/system #扩展软件包

复制代码

更改openwrt源的快捷步骤

1. rm -Rf /etc/opkg/distfeeds.conf
   
2. nano /etc/opkg/distfeeds.conf

复制代码

更改为clash 所需来的源（这个源来回折腾）

1. src/gz openwrt_core http://downloads.openwrt.org/releases/19.07.7/targets/at91/sama5/packages
   
2. src/gz openwrt_base https://mirrors.cloud.tencent.com/lede/snapshots/packages/arm_cortex-a5_vfpv4/base
   
3. src/gz openwrt_freifunk https://mirrors.aliyun.com/openwrt/releases/19.07.7/packages/arm_cortex-a5_vfpv4/freifunk
   
4. src/gz openwrt_luci https://mirrors.cloud.tencent.com/lede/snapshots/packages/arm_cortex-a5_vfpv4/luci
   
5. src/gz openwrt_packages https://mirrors.cloud.tencent.com/lede/snapshots/packages/arm_cortex-a5_vfpv4/packages
   
6. src/gz openwrt_routing https://mirrors.cloud.tencent.com/lede/snapshots/packages/arm_cortex-a5_vfpv4/routing
   
7. src/gz openwrt_telephony https://mirrors.cloud.tencent.com/lede/snapshots/packages/arm_cortex-a5_vfpv4/telephony

复制代码

原始安装源

1. src/gz openwrt_core http://downloads.openwrt.org/releases/19.07.7/targets/at91/sama5/packages
   
2. src/gz openwrt_base http://downloads.openwrt.org/releases/19.07.7/packages/arm_cortex-a5_vfpv4/base
   
3. src/gz openwrt_freifunk http://downloads.openwrt.org/releases/19.07.7/packages/arm_cortex-a5_vfpv4/freifunk
   
4. src/gz openwrt_luci http://downloads.openwrt.org/releases/19.07.7/packages/arm_cortex-a5_vfpv4/luci
   
5. src/gz openwrt_packages http://downloads.openwrt.org/releases/19.07.7/packages/arm_cortex-a5_vfpv4/packages
   
6. src/gz openwrt_routing http://downloads.openwrt.org/releases/19.07.7/packages/arm_cortex-a5_vfpv4/routing
   
7. src/gz openwrt_telephony http://downloads.openwrt.org/releases/19.07.7/packages/arm_cortex-a5_vfpv4/telephony

复制代码

或者替换为官方源

1. src/gz openwrt_core https://archive.openwrt.org/releases/19.07.7/targets/at91/sama5/packages
   
2. src/gz openwrt_base https://archive.openwrt.org/releases/19.07.7/packages/arm_cortex-a5_vfpv4/base
   
3. src/gz openwrt_freifunk https://archive.openwrt.org/releases/19.07.7/packages/arm_cortex-a5_vfpv4/freifunk
   
4. src/gz openwrt_luci https://archive.openwrt.org/releases/19.07.7/packages/arm_cortex-a5_vfpv4/luci
   
5. src/gz openwrt_packages https://archive.openwrt.org/releases/19.07.7/packages/arm_cortex-a5_vfpv4/packages
   
6. src/gz openwrt_routing https://archive.openwrt.org/releases/19.07.7/packages/arm_cortex-a5_vfpv4/routing
   
7. src/gz openwrt_telephony https://archive.openwrt.org/releases/19.07.7/packages/arm_cortex-a5_vfpv4/telephony

复制代码

阿里源

1. src/gz openwrt_core https://mirrors.aliyun.com/openwrt/releases/19.07.7/targets/at91/sama5/packages
   
2. src/gz openwrt_base https://mirrors.aliyun.com/openwrt/releases/19.07.7/packages/arm_cortex-a5_vfpv4/base
   
3. src/gz openwrt_freifunk https://mirrors.aliyun.com/openwrt/releases/19.07.7/packages/arm_cortex-a5_vfpv4/freifunk
   
4. src/gz openwrt_luci https://mirrors.aliyun.com/openwrt/releases/19.07.7/packages/arm_cortex-a5_vfpv4/luci
   
5. src/gz openwrt_packages https://mirrors.aliyun.com/openwrt/releases/19.07.7/packages/arm_cortex-a5_vfpv4/packages
   
6. src/gz openwrt_routing https://mirrors.aliyun.com/openwrt/releases/19.07.7/packages/arm_cortex-a5_vfpv4/routing
   
7. src/gz openwrt_telephony https://mirrors.aliyun.com/openwrt/releases/19.07.7/packages/arm_cortex-a5_vfpv4/telephony

复制代码

如果出现无法访问浏览器后台，可能是网关或者DNS设置错误
解决方法：打开SSH工具连接路由器，输入以下命令：

1. echo "nameserver 114.114.114.114">/tmp/resolv.conf
   
2. rm -f /var/lock/opkg.lock
   
3. opkg update

复制代码

中文界面:

1. opkg install luci-i18n-base-zh-cn luci-ssl-openssl  #安装中文界面和下载https文件的依赖

复制代码

1.安装openclash 目前试了2个版本 都可以用，到后面都需要升级
0.45.12依赖

安装依赖（某些依赖装不上，比如ip-full，我就放弃了）

1. opkg update && opkg install luci luci-base iptables dnsmasq-full coreutils coreutils-nohup bash curl ca-certificates ipset ip-full iptables-mod-tproxy iptables-mod-extra libcap libcap-bin ruby ruby-yaml kmod-tun luci-compat ip6tables-mod-nat kmod-inet-diag luciopkg luci-baseopkg iptablesopkg dnsmasq-fullopkg coreutilsopkg coreutils-nohupopkg bashopkg  curlopkg jsonfilteropkg ca-certificatesopkg ipsetopkg ip-fullopkg iptables-mod-tproxyopkg kmod-tunopkg

复制代码

或者安装openclash 0.42.05 依赖

1. opkg install coreutils-nohup bash iptables dnsmasq-full curl jsonfilter ca-certificates ipset ip-full iptables-mod-tproxy iptables-mod-extra libcap libcap-bin ruby ruby-yaml

复制代码

下载openclash 0.42.05 包

1. wget --no-check-certificate https://github.com/vernesong/OpenClash/releases/download/v0.42.07-beta/luci-app-openclash_0.42.07-beta_all.ipk
   
2. opkg --nodeps install luci-app-openclash_0.42.05-beta_all.ipk

复制代码

或者下载0.45.12 包

1. wget --no-check-certificate https://github.com/vernesong/OpenClash/releases/download/v0.45.12-beta/luci-app-openclash_0.45.12-beta_all.ipk

复制代码

安装

1. opkg install luci-app-openclash_0.45.12-beta_all.ipk

复制代码

or

1. opkg install luci-app-openclash_0.42.07-beta_all.ipk

复制代码

下载 Clash内核

1. wget --no-check-certificate  https://github.com/vernesong/OpenClash/releases/download/Clash/clash-linux-armv7.tar.gz

复制代码

解压到 /etc/openclash/core/文件夹

1. tar xzf clash-linux-armv7.tar.gz
   
2. mv clash /etc/openclash/core
   
3. ll /etc/openclash/core/

复制代码

到这一步 openclash就已经安装好了，剩下的就等配置config信息了

2.安装挂载点，安装aria2

1. opkg install block-mount aria2 webui-aria2 luci-app-aria2 luci-i18n-aria2-zh-cn
   
2. opkg install samba4-server luci-app-samba4 luci-i18n-samba-zh-cn

复制代码

安装mysql

1. opkg install libpthread libncurses libreadline mysql-server

复制代码

安装 php7 并且使用 可道云
1.安装运行环境
复制下面在SSH里执行：

1. opkg update
   
2. opkg install php7 php7-mod-session php7-cgi php7-mod-ctype php7-mod-hash php7-mod-pdo php7-mod-json php7-mod-curl php7-fastcgi  php7-mod-mbstring php7-mod-ldap php7-mod-gd php7-mod-pdo php7-mod-xml php7-mod-iconv unzip zoneinfo-asia zoneinfo-core

复制代码

Ssh
2.可道云下载
手动下载地址：https://kodcloud.com/download
或者用SSH安装命令(/mnt/sdb1根据挂载盘路径进行更改)：

1. dir="/mnt/sda1"
   
2. mkdir -p $dir/www
   
3. mkdir -p $dir/tmp
   
4. cd $dir/www
   
5. wget http://static.kodcloud.com/update/download/kodexplorer4.40.zip
   
6. unzip kodexplorer4.40.zip

复制代码

Ssh
3.php配置
更改/etc/php.ini文件内容如下：

1. [PHP]
   
2. zend.ze1_compatibility_mode = Off
   
3. engine = On
   
4. short_open_tag = On
   
5. precision    =  12
   
6. y2k_compliance = On
   
7. output_buffering = Off
   
8. zlib.output_compression = Off
   
9. implicit_flush = Off
   
10. unserialize_callback_func =
    
11. serialize_precision = 100
    
12. open_basedir = /mnt/sda1/:/tmp/:/proc/
    
13. disable_functions =
    
14. disable_classes =
    
15. expose_php = On
    
16. max_execution_time = 30    ; Maximum execution time of each script, in seconds.
    
17. max_input_time = 60    ; Maximum amount of time each script may spend parsing request data.
    
18. memory_limit = 20M    ; Maximum amount of memory a script may consume.
    
19. error_reporting  =  E_ALL & ~E_NOTICE & ~E_STRICT
    
20. display_errors = On
    
21. display_startup_errors = Off
    
22. log_errors = On
    
23. log_errors_max_len = 1024
    
24. ignore_repeated_errors = Off
    
25. ignore_repeated_source = Off
    
26. report_memleaks = On
    
27. track_errors = Off
    
28. variables_order = "EGPCS"
    
29. request_order = "GP"
    
30. register_globals = Off
    
31. register_long_arrays = Off
    
32. register_argc_argv = On
    
33. auto_globals_jit = On
    
34. post_max_size = 8M
    
35. magic_quotes_runtime = Off
    
36. magic_quotes_sybase = Off
    
37. auto_prepend_file =
    
38. auto_append_file =
    
39. default_mimetype = "text/html"
    
40. doc_root =
    
41. user_dir =
    
42. extension_dir = "/usr/lib/php"
    
43. enable_dl = On
    
44. cgi.force_redirect = 0
    
45. file_uploads = On
    
46. upload_tmp_dir = "/mnt/sda1/tmp"
    
47. upload_max_filesize = 20000M
    
48. max_file_uploads = 20
    
49. allow_url_fopen = On
    
50. allow_url_include = Off
    
51. default_socket_timeout = 60

复制代码

Ini
以上挂载盘路径是/mnt/sda1
更改请用专业编辑工具进行替换
替换/mnt/sda1为你的挂载盘路径

4.uHTTPd配置
(如果没有安装uHTTPd，请自行百度安装)
位置/etc/config
找到uhttpd并打开
在最后面添加

1. config uhttpd 'web'
   
2. list listen_http '0.0.0.0:81'
   
3. option home '/mnt/sda1/www'
   
4. option tcp_keepalive '1'
   
5. list index_page 'index.php'
   
6. list index_page 'index.html'
   
7. list index_page 'index.htm'
   
8. option rfc1918_filter '0'
   
9. option redirect_https '0'
   
10. list interpreter '.php=/usr/bin/php-cgi'
    
11. list interpreter '.cgi=/usr/bin/perl'

复制代码

以上
list listen_http '0.0.0.0:81'的81是端口
option home '/mnt/sda1/www'的/mnt/sda1/www是挂载盘可道云路径
在服务-uHTTPd里也可以自己更改，不过不要改MAIN这一项，要不然你就访问不了路由界面了
uHTTPd文件我已附带，也可以直接上传到/etc/config文件夹里

5.重启服务

1. /etc/init.d/uhttpd restart
   
2. /etc/init.d/php7-fastcgi restart

复制代码

Ssh
6.进入可道云
地址：http://路由IP:端口
没公网IP的尝试内网穿透吧

安装 filebrower

1. opkg update && opkg upgrade wget && opkg install ca-certificates
   
2. wget https://github.com/filebrowser/filebrowser/releases/download/v2.21.1/linux-armv7-filebrowser.tar.gz
   
3. chmod 777 linux-armv7-filebrowser.tar.gz
   
4. tar xzf linux-armv7-filebrowser.tar.gz
   
5. mv filebrowser /usr/bin/
   
6. filebrowser -a 0.0.0.0 -p 8080 -r /

复制代码

kxw***

谢谢楼主分享，可道云使用的时候，这个赚钱宝需要联网吗？比如使用里面的word啊，excel啊。。。

hzl8***

学习了，谢谢！

kxw***

1代我刷成1-19了，想刷回1-18可以吗？我的电脑然后就识别不了。。。

hbw***

kxw102 发表于 2022-5-17 09:16
1代我刷成1-19了，想刷回1-18可以吗？我的电脑然后就识别不了。。。

1代可以刷回啊

灬七***

感谢楼主解答了困扰我3天的问题