中国移动RAX3000Q安装 Luci

noel9***

本文基于软件版本：V1.1.1.202204141725，硬件版本 TZ7.823.346A 的中国移动 RAX3000Q 路由器

基本上在4月之后买到的，都没有 luci，那我们就只能手动安装了

首先你需要能够 shh 连上路由器，具体方法参考我上一篇帖子：中国移动RAX3000Q最简单解锁telnet/ssh，持久化超级管理员账号方法

更换相近架构

IPQ5018 是双核 Cortex-A53 处理器，opkg 默认的架构为 ipq，但是 OpenWrt 软件源里并没有这种架构，我们需要选择一个相近的架构。

根据 cpuinfo 信息判断应该是 armv7l 且支持 vfpv4 硬件浮点，但是内置的 interpreter 却是 /lib/ld-musl-arm.so.1，只支持软件浮点，这个问题可以创建一个软链接来解决。

1. ln -s /lib/ld-musl-arm.so.1 /lib/ld-musl-armhf.so.1

复制代码

由于目前运行的QSDK是32位的，无法像这篇文章一样直接使用 aarch64_cortex-a53 的软件源，最终我选择的架构是 arm_cortex-a7_neon-vfpv4。

在 /etc/opkg.conf 中添加以下内容：

1. arch all 1
   
2. arch noarch 1
   
3. arch ipq 10
   
4. arch arm_cortex-a7_neon-vfpv4 20

复制代码

在探索过程中我发现 iqp40xx 处理器的包也是可以用，架构和我们修改后的一致

地址如下：https://downloads.openwrt.org/releases/18.06.0/targets/ipq40xx/generic/packages/

开始安装

opkg 的一般用法是先 opkg update 再 opkg install 包名，但是我们的系统版本比较低，wget 版本也低，不支持 https，所以我们选择使用 opkg install + 包的地址

按顺序执行下面的命令，每次一条，应该不会报错，依赖关系都理好了

1. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/libjson-script20210516_2021-05-16-b14c4688-2_arm_cortex-a7_neon-vfpv4.ipk
   
2. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/uhttpd_2021-03-21-15346de8-2_arm_cortex-a7_neon-vfpv4.ipk
   
3. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/base/lua_5.1.5-2_arm_cortex-a7_neon-vfpv4.ipk
   
4. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci-lib-nixio_git-20.356.64372-1259bb1-1_arm_cortex-a7_neon-vfpv4.ipk
   
5. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci-lib-ip_git-20.356.64372-1259bb1-1_arm_cortex-a7_neon-vfpv4.ipk
   
6. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci-lib-jsonc_git-20.356.64372-1259bb1-1_arm_cortex-a7_neon-vfpv4.ipk
   
7. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/liblucihttp_2019-07-05-a34a17d5-1_arm_cortex-a7_neon-vfpv4.ipk
   
8. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_arm_cortex-a7_neon-vfpv4.ipk
   
9. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci-base_git-20.356.64372-1259bb1-1_arm_cortex-a7_neon-vfpv4.ipk
   
10. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci-mod-admin-full_git-20.356.64372-1259bb1-1_arm_cortex-a7_neon-vfpv4.ipk
    
11. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci-theme-bootstrap_git-20.356.64372-1259bb1-1_all.ipk
    
12. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci-proto-ppp_git-20.356.64372-1259bb1-1_all.ipk
    
13. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/libnl-tiny1_2020-08-05-c291088f-2_arm_cortex-a7_neon-vfpv4.ipk
    
14. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/libubox20210516_2021-05-16-b14c4688-2_arm_cortex-a7_neon-vfpv4.ipk
    
15. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/libuci20130104_2021-04-14-4b3db117-5_arm_cortex-a7_neon-vfpv4.ipk
    
16. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/libubus20210630_2021-06-30-4fc532c8-2_arm_cortex-a7_neon-vfpv4.ipk
    
17. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/libiwinfo-data_2022-04-26-dc6847eb-1_arm_cortex-a7_neon-vfpv4.ipk
    
18. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/libiwinfo20210430_2022-04-26-dc6847eb-1_arm_cortex-a7_neon-vfpv4.ipk
    
19. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/liblua5.1.5_5.1.5-9_arm_cortex-a7_neon-vfpv4.ipk
    
20. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/libiwinfo-lua_2022-04-26-dc6847eb-1_arm_cortex-a7_neon-vfpv4.ipk
    
21. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci-proto-ipv6_git-20.356.64372-1259bb1-1_all.ipk
    
22. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/rpcd-mod-rrdns_20170710_arm_cortex-a7_neon-vfpv4.ipk
    
23. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci-app-firewall_git-20.356.64372-1259bb1-1_all.ipk
    
24. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/luci/luci-app-opkg_git-22.154.41894-1cf976c_all.ipk
    
25. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci-proto-ppp_git-20.356.64372-1259bb1-1_all.ipk
    
26. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci_git-20.356.64372-1259bb1-1_all.ipk
    
27. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/libjson-c5_0.15-2_arm_cortex-a7_neon-vfpv4.ipk
    
28. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/libblobmsg-json20210516_2021-05-16-b14c4688-2_arm_cortex-a7_neon-vfpv4.ipk
    
29. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/packages-21.02/arm_cortex-a7_neon-vfpv4/base/rpcd_2022-02-19-8d26a1ba-1_arm_cortex-a7_neon-vfpv4.ipk
    
30. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci-i18n-base-zh-cn_git-20.356.64372-1259bb1-1_all.ipk
    
31. opkg install http://mirrors.tuna.tsinghua.edu.cn/openwrt/releases/18.06.0/packages/arm_cortex-a7_neon-vfpv4/luci/luci-theme-material_git-20.356.64372-1259bb1-1_all.ipk

复制代码

如果有报错，不要慌，来贴子下评论就好，你遇到的问题我肯定都遇到过，只不过现在复盘有一些可能存在的问题我记不得了

上面的命令都成功执行之后，再执行下面的命令：

1. uci -q delete uhttpd.main.listen_http
   
2. uci add_list uhttpd.main.listen_http="0.0.0.0:8080"
   
3. uci add_list uhttpd.main.listen_http="[::]:8080"
   
4. uci commit uhttpd

复制代码

设置服务开机自启以及启动服务：

1. /etc/init.d/rpcd enable
   
2. /etc/init.d/uhttpd enable
   
3. /etc/init.d/rpcd start
   
4. /etc/init.d/uhttpd start

复制代码

rpcd 的配置文件中，关于 ubus 的配置可能多了一些信息，需要删掉，修改后的文件：

1. vi /etc/config/rpcd
   
2. config rpcd
   
3.      option socket /var/run/ubus.sock
   
4.      option timeout 30
   
5. # 下面的内容不要改

复制代码

现在访问 http://192.168.10.1:8080 即可见到 luci

q123***

  luci没办法启动   /etc/config/luci seems to be corrupt, unable to find section 'main'

q123***

搜了一圈说 rpcd 的问题     有几个包没安装成功 不知道是不是这个原因

noel9***

q12390110 发表于 2022-9-15 23:55
搜了一圈说 rpcd 的问题     有几个包没安装成功 不知道是不是这个原因

我上面列的那些没安装成功的话肯定是启动不了的。我想起来我漏说了一件事，就是我列出来的那些包，有的是和原系统自带的包冲突，需要先卸载有冲突的包再安装

jkgs***

uhttpd原生就有只是没有lua.www里面文件也没有

noel9***

jkgs2658 发表于 2022-9-22 03:37
uhttpd原生就有只是没有lua.www里面文件也没有

要看你是什么时候拿到的机器，我拿到的这一批啥都没有

cui442***

root@OpenWrt:~# opkg install http://mirrors.tuna.tsinghua.edu ... es-21.02/arm_cortex
-a7_neon-vfpv4/base/libjson-script20210516_2021-05-16-b14c4688-2_arm_cortex-a7_neon-vfpv4.ipk
Downloading http://mirrors.tuna.tsinghua.edu ... -a7_neon-vfpv4.ipk.
Installing libjson-script20210516 (2021-05-16-b14c4688-2) to root...
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for libjson-script20210516:
*         libubox20210516 *
* opkg_install_cmd: Cannot install package libjson-script20210516.
这个怎么搞

c***

啥时候能直接刷openwrt哦

asto***

刷完能mesh么

hua***

怎么查看？？？

jas***

V1.1.0.202201261808的/www里面已经啥都没有了

无量***

如果能刷op就好了不过有SSH也还行吧至少能用猫咪？

ez***

牛逼人物  向你致敬

t3***

大佬 我想问句 nat和upnp都是完整的吗 跑pcdn用

GuLuXi***

楼主，请问我按照你的步骤执行到开机启动那一步，执行命令rpcd enable显示Failed to connect to ubus有办法解决吗？是我刷入的luci不对的原因吗？
我刷到下面四个ipk文件，发现镜像站的这四个文件已经失效
libiwinfo-data_2022-04-26-dc6847eb-1_arm_cortex-a7_neon-vfpv4.ipk
libiwinfo20210430_2022-04-26-dc6847eb-1_arm_cortex-a7_neon-vfpv4.ipk
libiwinfo-lua_2022-04-26-dc6847eb-1_arm_cortex-a7_neon-vfpv4.ipk
luci-app-opkg_git-22.154.41894-1cf976c_all.ipk
我去镜像站换成了更高的版本，刷入的。
另外luci-app-firewall_git-20.356.64372-1259bb1-1_all.ipk这个文件我也是通过 --force-depends强行安装上的，不知道有没有影响